From a336c2c5005251e4cb0f3a62ccabdb4cfccad915 Mon Sep 17 00:00:00 2001 From: lokher Date: Tue, 6 Dec 2022 17:10:48 +0800 Subject: Merge upstream master to 2022 Q4 breaking change --- keyboards/system76/launch_1/config.h | 111 ----------------------------------- 1 file changed, 111 deletions(-) delete mode 100644 keyboards/system76/launch_1/config.h (limited to 'keyboards/system76/launch_1/config.h') diff --git a/keyboards/system76/launch_1/config.h b/keyboards/system76/launch_1/config.h deleted file mode 100644 index 0431b9ab17..0000000000 --- a/keyboards/system76/launch_1/config.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Copyright (C) 2021 System76 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -// Key matrix size -#define MATRIX_ROWS 6 -#define MATRIX_COLS 14 - -/* - * Key matrix pins - * ROWS: AVR pins used for rows, top to bottom - * COLS: AVR pins used for columns, left to right - */ -#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 } -#define MATRIX_COL_PINS { D7, C7, C6, B6, B5, B4, D6, D4, E6, D5, D3, D2, B7, B0 } - -/* - * Diode Direction - * COL2ROW = COL => Anode (+), ROW => Cathode (-) - * ROW2COL = ROW => Anode (+), COL => Cathode (-) - */ -#define DIODE_DIRECTION COL2ROW - -// Set 0 if debouncing isn't needed -#define DEBOUNCE 5 - -#ifdef RGB_MATRIX_ENABLE -# define RGB_DI_PIN E2 -# define RGB_MATRIX_LED_COUNT 84 -# define RGB_MATRIX_KEYPRESSES // Reacts to keypresses -// # define RGB_MATRIX_KEYRELEASES // Reacts to keyreleases (instead of keypresses) -// # define RGB_MATRIX_FRAMEBUFFER_EFFECTS // Enables framebuffer effects -# define RGB_DISABLE_WHEN_USB_SUSPENDED // Turns off effects when suspended -// Limit brightness to support USB-A at 0.5 A -// TODO: Do this dynamically based on power source -# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 176 // Limits maximum brightness of LEDs to 176 out of 255. If not defined, maximum brightness is set to 255 -# define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Sets the default mode, if none has been set -# define RGB_MATRIX_DEFAULT_HUE 142 // Sets the default hue value, if none has been set -# define RGB_MATRIX_DEFAULT_SAT 255 // Sets the default saturation value, if none has been set -# define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set -# define RGB_MATRIX_DEFAULT_SPD 127 // Sets the default animation speed, if none has been set -# define RGB_MATRIX_DISABLE_KEYCODES // Disables control of rgb matrix by keycodes (must use code functions to control the feature) - -# define ENABLE_RGB_MATRIX_CYCLE_ALL -# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL -# define ENABLE_RGB_MATRIX_RAINDROPS -# define ENABLE_RGB_MATRIX_SPLASH -# define ENABLE_RGB_MATRIX_MULTISPLASH -#endif // RGB_MATRIX_ENABLE - -// Mechanical locking support; use KC_LCAP, KC_LNUM, or KC_LSCR instead in keymap -#define LOCKING_SUPPORT_ENABLE - -// Locking resynchronize hack -#define LOCKING_RESYNC_ENABLE - -// I2C { -#define F_SCL 100000UL // Run I2C bus at 100 kHz -#define I2C_START_RETRY_COUNT 20 -#define I2C_TIMEOUT 100 // milliseconds -// } I2C - -// EEPROM { -#define EEPROM_SIZE 1024 -// TODO: Refactor with new user EEPROM code (coming soon) -#define EEPROM_MAGIC 0x76EC -#define EEPROM_MAGIC_ADDR 64 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x02 -#define EEPROM_VERSION_ADDR (EEPROM_MAGIC_ADDR + 2) -// } EEPROM - -// Dynamic keymap { -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 -#define DYNAMIC_KEYMAP_MACRO_COUNT 0 -// Dynamic keymap starts after EEPROM version -#define DYNAMIC_KEYMAP_EEPROM_ADDR (EEPROM_VERSION_ADDR + 1) -// Dynamic macro starts after dynamic keymaps, it is disabled -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR (DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2)) -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 0 -// } Dynamic keymap - -// System76 EC { -#define SYSTEM76_EC_EEPROM_ADDR (DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE) -#define SYSTEM76_EC_EEPROM_SIZE (EEPROM_SIZE - SYSTEM76_EC_EEPROM_ADDR) -// } System76 EC -- cgit v1.2.3