Merge remote-tracking branch 'origin/master' into develop

3 files changed, 70 insertions, 80 deletions

diff --git a/keyboards/senselessclay/ck60/ck60.c b/keyboards/senselessclay/ck60/ck60.c
index a2fe38aac7..1c30b77185 100644
--- a/keyboards/senselessclay/ck60/ck60.c
+++ b/keyboards/senselessclay/ck60/ck60.c
@@ -1,4 +1,4 @@
-/* Copyright 2020 Hadi Iskandarani
+/* Copyright 2022 kb-elmo<mail@elmo.space>
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,4 +14,30 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "ck60.h"
\ No newline at end of file
+#include "ck60.h"
+
+#define __ NO_LED
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+    //Key Matrix to LED Index
+    {   0,   1,   2,   3,   4,   5,   6,   7,   8,   9,   10,  11,  12,  13  },
+    {   27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  14  },
+    {   28,  29,  30,  31,  32,  33,  34,  35,  36,  37,  38,  39,  40,  __  },
+    {   53,  52,  51,  50,  49,  48,  47,  46,  45,  44,  43,  42,  41,  __  },
+    {   54,  55,  56,  __,  __,  __,  57,  __,  __,  __,  58,  59,  60,  61  }
+}, {
+    //LED Index to Physical Positon
+    { 0,   0  }, { 17,  0  }, { 34,  0  }, { 52,  0  }, { 69,  0  }, { 86,  0  }, { 103, 0  }, { 121, 0  }, { 138, 0  }, { 155, 0  }, { 172, 0  }, { 190, 0  }, { 207, 0  }, { 215, 0  },
+    { 224, 24 }, { 215, 16 }, { 198, 16 }, { 180, 16 }, { 164, 16 }, { 146, 16 }, { 129, 16 }, { 112, 16 }, { 95,  16 }, { 78,  16 }, { 60,  16 }, { 43,  16 }, { 26 , 16 }, { 0,   16 },
+    { 0,   32 }, { 30,  32 }, { 47,  32 }, { 65,  32 }, { 81,  32 }, { 99,  32 }, { 116, 32 }, { 133, 32 }, { 150, 32 }, { 168, 32 }, { 185, 32 }, { 202, 32 }, { 220, 32 },
+    { 207, 48 }, { 190, 48 }, { 172, 48 }, { 155, 48 }, { 138, 48 }, { 121, 48 }, { 103, 48 }, { 86,  48 }, { 69,  48 }, { 52,  48 }, { 34,  48 }, { 17,  48 }, { 0,   48 },
+    { 0,   64 }, { 17,  64 }, { 34,  64 },                                        { 103, 64 },                                        { 172, 64 }, { 190, 64 }, { 207, 64 }, { 224, 64 }
+}, {
+    1,   4,   4,   4,   4,   4,   4,   4,   4,   4,   4,   4,   4,   1,
+    1,   4,   4,   4,   4,   4,   4,   4,   4,   4,   4,   4,   4,   1,
+    1,   4,   4,   4,   4,   4,   4,   4,   4,   4,   4,   4,   4,
+    1,   4,   4,   4,   4,   4,   4,   4,   4,   4,   4,   4,   1,
+    1,   1,   1,                  4,                  1,   1,   1,   1
+} };
+#endif
diff --git a/keyboards/senselessclay/ck60/config.h b/keyboards/senselessclay/ck60/config.h
index 7e4a493701..f826ad9ad7 100644
--- a/keyboards/senselessclay/ck60/config.h
+++ b/keyboards/senselessclay/ck60/config.h
@@ -30,90 +30,51 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 14
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-/* rev0 */ 
+/* Keyboard Matrix Assignments */
 #define MATRIX_ROW_PINS { B3, B2, F1, F4, F5 }
 #define MATRIX_COL_PINS { F0, D5, D3, D2, D1, D0, C7, C6, B6, B5, B4, D7, D6, D4 }
 
-//#define UNUSED_PINS { B0, B7, E6 }
-
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+/* Debounce reduces chatter */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
+/* RGB matrix lighting */ 
+#define RGB_DI_PIN B1
+#define DRIVER_LED_TOTAL 62
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 160   // limit brightness to not overamp the USB
+#define RGB_MATRIX_LED_FLUSH_LIMIT 16       // 16 is equivalent to limiting to 60fps
+#define RGB_DISABLE_AFTER_TIMEOUT 0         // number of ticks to wait until disabling effects
+#define RGB_DISABLE_WHEN_USB_SUSPENDED      // turn off effects when suspended
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+
+// RGB Matrix Animation modes. Explicitly enabled
+// For full list of effects, see:
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_BREATHING
+#    define ENABLE_RGB_MATRIX_BAND_VAL
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#    define ENABLE_RGB_MATRIX_CYCLE_ALL
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#    define ENABLE_RGB_MATRIX_RAINDROPS
+// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#    define ENABLE_RGB_MATRIX_MULTISPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 /* disable these deprecated features by default */
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
-
-/* RGB Backlighting */ 
-#define RGB_DI_PIN B1
-#define RGBLED_NUM 62
-#define RGBLIGHT_ANIMATIONS
-#define RGBLIGHT_LIMIT_VAL 128
-#define RGBLIGHT_SLEEP
-#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL+5
\ No newline at end of file
diff --git a/keyboards/senselessclay/ck60/rules.mk b/keyboards/senselessclay/ck60/rules.mk
index 6b490bdd04..56aec94425 100644
--- a/keyboards/senselessclay/ck60/rules.mk
+++ b/keyboards/senselessclay/ck60/rules.mk
@@ -8,11 +8,14 @@ BOOTLOADER = atmel-dfu
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no       # Mouse keys
+MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
\ No newline at end of file
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+RGB_MATRIX_ENABLE = yes     # RGB matrix lighting
+RGB_MATRIX_DRIVER = WS2812
\ No newline at end of file