2020 February 29 Breaking Changes Update (#8064)

4 files changed, 608 insertions, 63 deletions

diff --git a/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.c
index 9d10fbd754..7c09bd997c 100644
--- a/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.c
+++ b/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.c
@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -20,14 +20,76 @@
  */
 
 #include "hal.h"
+#include "stm32_gpio.h"
+
+/*===========================================================================*/
+/* Driver local definitions.                                                 */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables.                                                */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types.                                         */
+/*===========================================================================*/
+
+/**
+ * @brief   Type of STM32 GPIO port setup.
+ */
+typedef struct {
+  uint32_t              moder;
+  uint32_t              otyper;
+  uint32_t              ospeedr;
+  uint32_t              pupdr;
+  uint32_t              odr;
+  uint32_t              afrl;
+  uint32_t              afrh;
+} gpio_setup_t;
+
+/**
+ * @brief   Type of STM32 GPIO initialization data.
+ */
+typedef struct {
+#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
+  gpio_setup_t          PAData;
+#endif
+#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
+  gpio_setup_t          PBData;
+#endif
+#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
+  gpio_setup_t          PCData;
+#endif
+#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
+  gpio_setup_t          PDData;
+#endif
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+  gpio_setup_t          PEData;
+#endif
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+  gpio_setup_t          PFData;
+#endif
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+  gpio_setup_t          PGData;
+#endif
+#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
+  gpio_setup_t          PHData;
+#endif
+#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
+  gpio_setup_t          PIData;
+#endif
+#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
+  gpio_setup_t          PJData;
+#endif
+#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
+  gpio_setup_t          PKData;
+#endif
+} gpio_config_t;
 
-#if HAL_USE_PAL || defined(__DOXYGEN__)
 /**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
+ * @brief   STM32 GPIO static initialization data.
  */
-const PALConfig pal_default_config = {
+static const gpio_config_t gpio_default_config = {
 #if STM32_HAS_GPIOA
   {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
    VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
@@ -62,23 +124,118 @@ const PALConfig pal_default_config = {
 #endif
 #if STM32_HAS_GPIOI
   {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH},
+#endif
+#if STM32_HAS_GPIOJ
+  {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
+   VAL_GPIOJ_ODR,   VAL_GPIOJ_AFRL,   VAL_GPIOJ_AFRH},
+#endif
+#if STM32_HAS_GPIOK
+  {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
+   VAL_GPIOK_ODR,   VAL_GPIOK_AFRL,   VAL_GPIOK_AFRH}
 #endif
 };
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+
+static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
+
+  gpiop->OTYPER  = config->otyper;
+  gpiop->OSPEEDR = config->ospeedr;
+  gpiop->PUPDR   = config->pupdr;
+  gpiop->ODR     = config->odr;
+  gpiop->AFRL    = config->afrl;
+  gpiop->AFRH    = config->afrh;
+  gpiop->MODER   = config->moder;
+}
+
+static void stm32_gpio_init(void) {
+
+  /* Enabling GPIO-related clocks, the mask comes from the
+     registry header file.*/
+  rccResetAHB(STM32_GPIO_EN_MASK);
+  rccEnableAHB(STM32_GPIO_EN_MASK, true);
+
+  /* Initializing all the defined GPIO ports.*/
+#if STM32_HAS_GPIOA
+  gpio_init(GPIOA, &gpio_default_config.PAData);
+#endif
+#if STM32_HAS_GPIOB
+  gpio_init(GPIOB, &gpio_default_config.PBData);
 #endif
+#if STM32_HAS_GPIOC
+  gpio_init(GPIOC, &gpio_default_config.PCData);
+#endif
+#if STM32_HAS_GPIOD
+  gpio_init(GPIOD, &gpio_default_config.PDData);
+#endif
+#if STM32_HAS_GPIOE
+  gpio_init(GPIOE, &gpio_default_config.PEData);
+#endif
+#if STM32_HAS_GPIOF
+  gpio_init(GPIOF, &gpio_default_config.PFData);
+#endif
+#if STM32_HAS_GPIOG
+  gpio_init(GPIOG, &gpio_default_config.PGData);
+#endif
+#if STM32_HAS_GPIOH
+  gpio_init(GPIOH, &gpio_default_config.PHData);
+#endif
+#if STM32_HAS_GPIOI
+  gpio_init(GPIOI, &gpio_default_config.PIData);
+#endif
+#if STM32_HAS_GPIOJ
+  gpio_init(GPIOJ, &gpio_default_config.PJData);
+#endif
+#if STM32_HAS_GPIOK
+  gpio_init(GPIOK, &gpio_default_config.PKData);
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers.                                                */
+/*===========================================================================*/
 
-void enter_bootloader_mode_if_requested(void);
+/*===========================================================================*/
+/* Driver exported functions.                                                */
+/*===========================================================================*/
 
 /**
  * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
+ * @details GPIO ports and system clocks are initialized before everything
+ *          else.
  */
 void __early_init(void) {
+  extern void enter_bootloader_mode_if_requested(void);
   enter_bootloader_mode_if_requested();
+  stm32_gpio_init();
   stm32_clock_init();
 }
 
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief   SDC card detection.
+ */
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   SDC card write protection detection.
+ */
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif /* HAL_USE_SDC */
+
 #if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
 /**
  * @brief   MMC_SPI card detection.
@@ -106,4 +263,6 @@ bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
  * @todo    Add your board-specific code, if any.
  */
 void boardInit(void) {
+  SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
+  SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
 }
diff --git a/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.h
index de3a93d1ce..57636d1f12 100644
--- a/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.h
+++ b/keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.h
@@ -22,6 +22,10 @@
 #ifndef BOARD_H
 #define BOARD_H
 
+/*===========================================================================*/
+/* Driver constants.                                                         */
+/*===========================================================================*/
+
 /*
  * Setup for ST STM32F072B-Discovery board.
  */
@@ -166,11 +170,9 @@
 #define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
 #define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
 #define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
-
 #define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
 #define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
 #define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
-
 #define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
 #define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
 #define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
@@ -178,11 +180,24 @@
 #define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
 #define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
 #define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
+#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
 
+/*===========================================================================*/
+/* Driver pre-compile time settings.                                         */
+/*===========================================================================*/
 
+/*===========================================================================*/
+/* Derived constants and error checks.                                       */
+/*===========================================================================*/
 
-#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
-#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
+/*===========================================================================*/
+/* Driver data structures and types.                                         */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros.                                                            */
+/*===========================================================================*/
 
 /*
  * I/O ports initial setup, this configuration is established soon after reset
@@ -908,6 +923,9 @@
                                      PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
                                      PIN_AFIO_AF(GPIOF_PIN15, 0U))
 
+/*===========================================================================*/
+/* External declarations.                                                    */
+/*===========================================================================*/
 
 #if !defined(_FROM_ASM_)
 #ifdef __cplusplus
diff --git a/keyboards/projectkb/alice/chconf.h b/keyboards/projectkb/alice/chconf.h
index 89388dd5a3..4640ff5332 100644
--- a/keyboards/projectkb/alice/chconf.h
+++ b/keyboards/projectkb/alice/chconf.h
@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -15,7 +15,7 @@
 */
 
 /**
- * @file    templates/chconf.h
+ * @file    rt/templates/chconf.h
  * @brief   Configuration file template.
  * @details A copy of this file must be placed in each project directory, it
  *          contains the application specific kernel settings.
@@ -29,6 +29,7 @@
 #define CHCONF_H
 
 #define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
 
 /*===========================================================================*/
 /**
@@ -41,14 +42,34 @@
  * @brief   System time counter resolution.
  * @note    Allowed values are 16 or 32 bits.
  */
+#if !defined(CH_CFG_ST_RESOLUTION)
 #define CH_CFG_ST_RESOLUTION                32
+#endif
 
 /**
  * @brief   System tick frequency.
  * @details Frequency of the system timer that drives the system ticks. This
  *          setting also defines the system tick time unit.
  */
+#if !defined(CH_CFG_ST_FREQUENCY)
 #define CH_CFG_ST_FREQUENCY                 10000
+#endif
+
+/**
+ * @brief   Time intervals data size.
+ * @note    Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE               32
+#endif
+
+/**
+ * @brief   Time types data size.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE              32
+#endif
 
 /**
  * @brief   Time delta constant for the tick-less mode.
@@ -58,7 +79,9 @@
  *          The value one is not valid, timeouts are rounded up to
  *          this value.
  */
+#if !defined(CH_CFG_ST_TIMEDELTA)
 #define CH_CFG_ST_TIMEDELTA                 2
+#endif
 
 /** @} */
 
@@ -81,7 +104,9 @@
  * @note    The round robin preemption is not supported in tickless mode and
  *          must be set to zero in that case.
  */
+#if !defined(CH_CFG_TIME_QUANTUM)
 #define CH_CFG_TIME_QUANTUM                 0
+#endif
 
 /**
  * @brief   Managed RAM size.
@@ -94,7 +119,9 @@
  *          provide the @p __heap_base__ and @p __heap_end__ symbols.
  * @note    Requires @p CH_CFG_USE_MEMCORE.
  */
+#if !defined(CH_CFG_MEMCORE_SIZE)
 #define CH_CFG_MEMCORE_SIZE                 0
+#endif
 
 /**
  * @brief   Idle thread automatic spawn suppression.
@@ -103,7 +130,9 @@
  *          function becomes the idle thread and must implement an
  *          infinite loop.
  */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
 #define CH_CFG_NO_IDLE_THREAD               FALSE
+#endif
 
 /** @} */
 
@@ -122,7 +151,9 @@
  * @note    This is not related to the compiler optimization options.
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
 #define CH_CFG_OPTIMIZE_SPEED               FALSE
+#endif
 
 /** @} */
 
@@ -140,7 +171,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_TM)
 #define CH_CFG_USE_TM                       FALSE
+#endif
 
 /**
  * @brief   Threads registry APIs.
@@ -148,7 +181,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_REGISTRY)
 #define CH_CFG_USE_REGISTRY                 TRUE
+#endif
 
 /**
  * @brief   Threads synchronization APIs.
@@ -157,7 +192,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_WAITEXIT)
 #define CH_CFG_USE_WAITEXIT                 TRUE
+#endif
 
 /**
  * @brief   Semaphores APIs.
@@ -165,7 +202,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_SEMAPHORES)
 #define CH_CFG_USE_SEMAPHORES               TRUE
+#endif
 
 /**
  * @brief   Semaphores queuing mode.
@@ -176,7 +215,9 @@
  *          requirements.
  * @note    Requires @p CH_CFG_USE_SEMAPHORES.
  */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
 #define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+#endif
 
 /**
  * @brief   Mutexes APIs.
@@ -184,7 +225,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_MUTEXES)
 #define CH_CFG_USE_MUTEXES                  TRUE
+#endif
 
 /**
  * @brief   Enables recursive behavior on mutexes.
@@ -194,7 +237,9 @@
  * @note    The default is @p FALSE.
  * @note    Requires @p CH_CFG_USE_MUTEXES.
  */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
 #define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+#endif
 
 /**
  * @brief   Conditional Variables APIs.
@@ -204,7 +249,9 @@
  * @note    The default is @p TRUE.
  * @note    Requires @p CH_CFG_USE_MUTEXES.
  */
+#if !defined(CH_CFG_USE_CONDVARS)
 #define CH_CFG_USE_CONDVARS                 TRUE
+#endif
 
 /**
  * @brief   Conditional Variables APIs with timeout.
@@ -214,7 +261,9 @@
  * @note    The default is @p TRUE.
  * @note    Requires @p CH_CFG_USE_CONDVARS.
  */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
 #define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+#endif
 
 /**
  * @brief   Events Flags APIs.
@@ -222,7 +271,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_EVENTS)
 #define CH_CFG_USE_EVENTS                   TRUE
+#endif
 
 /**
  * @brief   Events Flags APIs with timeout.
@@ -232,7 +283,9 @@
  * @note    The default is @p TRUE.
  * @note    Requires @p CH_CFG_USE_EVENTS.
  */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
 #define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+#endif
 
 /**
  * @brief   Synchronous Messages APIs.
@@ -241,7 +294,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_MESSAGES)
 #define CH_CFG_USE_MESSAGES                 TRUE
+#endif
 
 /**
  * @brief   Synchronous Messages queuing mode.
@@ -252,7 +307,9 @@
  *          requirements.
  * @note    Requires @p CH_CFG_USE_MESSAGES.
  */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
 #define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+#endif
 
 /**
  * @brief   Mailboxes APIs.
@@ -262,7 +319,9 @@
  * @note    The default is @p TRUE.
  * @note    Requires @p CH_CFG_USE_SEMAPHORES.
  */
+#if !defined(CH_CFG_USE_MAILBOXES)
 #define CH_CFG_USE_MAILBOXES                TRUE
+#endif
 
 /**
  * @brief   Core Memory Manager APIs.
@@ -271,7 +330,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_MEMCORE)
 #define CH_CFG_USE_MEMCORE                  FALSE
+#endif
 
 /**
  * @brief   Heap Allocator APIs.
@@ -283,7 +344,9 @@
  *          @p CH_CFG_USE_SEMAPHORES.
  * @note    Mutexes are recommended.
  */
+#if !defined(CH_CFG_USE_HEAP)
 #define CH_CFG_USE_HEAP                     FALSE
+#endif
 
 /**
  * @brief   Memory Pools Allocator APIs.
@@ -292,7 +355,31 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_MEMPOOLS)
 #define CH_CFG_USE_MEMPOOLS                 FALSE
+#endif
+
+/**
+ * @brief   Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS                FALSE
+#endif
+
+/**
+ * @brief   Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES                    FALSE
+#endif
 
 /**
  * @brief   Dynamic Threads APIs.
@@ -303,7 +390,80 @@
  * @note    Requires @p CH_CFG_USE_WAITEXIT.
  * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
  */
+#if !defined(CH_CFG_USE_DYNAMIC)
 #define CH_CFG_USE_DYNAMIC                  FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ *          kernel.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY                  FALSE
+#endif
+
+/**
+ * @brief   Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ *          pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
+#endif
+
+/**
+ * @brief   Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY     FALSE
+#endif
+
+/**
+ * @brief   Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS      FALSE
+#endif
+
+/**
+ * @brief   Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES           FALSE
+#endif
+
+/**
+ * @brief   Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES                FALSE
+#endif
 
 /** @} */
 
@@ -319,7 +479,9 @@
  *
  * @note    The default is @p FALSE.
  */
+#if !defined(CH_DBG_STATISTICS)
 #define CH_DBG_STATISTICS                   FALSE
+#endif
 
 /**
  * @brief   Debug option, system state check.
@@ -328,7 +490,9 @@
  *
  * @note    The default is @p FALSE.
  */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
 #define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+#endif
 
 /**
  * @brief   Debug option, parameters checks.
@@ -337,7 +501,9 @@
  *
  * @note    The default is @p FALSE.
  */
+#if !defined(CH_DBG_ENABLE_CHECKS)
 #define CH_DBG_ENABLE_CHECKS                FALSE
+#endif
 
 /**
  * @brief   Debug option, consistency checks.
@@ -347,7 +513,9 @@
  *
  * @note    The default is @p FALSE.
  */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
 #define CH_DBG_ENABLE_ASSERTS               FALSE
+#endif
 
 /**
  * @brief   Debug option, trace buffer.
@@ -355,14 +523,18 @@
  *
  * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
  */
+#if !defined(CH_DBG_TRACE_MASK)
 #define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+#endif
 
 /**
  * @brief   Trace buffer entries.
  * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
  *          different from @p CH_DBG_TRACE_MASK_DISABLED.
  */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
 #define CH_DBG_TRACE_BUFFER_SIZE            128
+#endif
 
 /**
  * @brief   Debug option, stack checks.
@@ -374,7 +546,9 @@
  * @note    The default failure mode is to halt the system with the global
  *          @p panic_msg variable set to @p NULL.
  */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
 #define CH_DBG_ENABLE_STACK_CHECK           FALSE
+#endif
 
 /**
  * @brief   Debug option, stacks initialization.
@@ -384,7 +558,9 @@
  *
  * @note    The default is @p FALSE.
  */
+#if !defined(CH_DBG_FILL_THREADS)
 #define CH_DBG_FILL_THREADS                 FALSE
+#endif
 
 /**
  * @brief   Debug option, threads profiling.
@@ -395,7 +571,9 @@
  * @note    This debug option is not currently compatible with the
  *          tickless mode.
  */
+#if !defined(CH_DBG_THREADS_PROFILING)
 #define CH_DBG_THREADS_PROFILING            FALSE
+#endif
 
 /** @} */
 
@@ -407,6 +585,22 @@
 /*===========================================================================*/
 
 /**
+ * @brief   System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ *          just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
  * @brief   Threads descriptor structure extension.
  * @details User fields added to the end of the @p thread_t structure.
  */
@@ -415,9 +609,9 @@
 
 /**
  * @brief   Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
  *
- * @note    It is invoked from within @p chThdInit() and implicitly from all
+ * @note    It is invoked from within @p _thread_init() and implicitly from all
  *          the threads creation APIs.
  */
 #define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
diff --git a/keyboards/projectkb/alice/halconf.h b/keyboards/projectkb/alice/halconf.h
index da08cdbae2..adb1a90715 100644
--- a/keyboards/projectkb/alice/halconf.h
+++ b/keyboards/projectkb/alice/halconf.h
@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -25,7 +25,11 @@
  * @{
  */
 
-#pragma once
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_0_
 
 #include "mcuconf.h"
 
@@ -33,140 +37,181 @@
  * @brief   Enables the PAL subsystem.
  */
 #if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                 TRUE
+#define HAL_USE_PAL                         TRUE
 #endif
 
 /**
  * @brief   Enables the ADC subsystem.
  */
 #if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                 FALSE
+#define HAL_USE_ADC                         FALSE
 #endif
 
 /**
  * @brief   Enables the CAN subsystem.
  */
 #if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                 FALSE
+#define HAL_USE_CAN                         FALSE
 #endif
 
 /**
- * @brief   Enables the DAC subsystem.
+ * @brief   Enables the cryptographic subsystem.
  */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                 FALSE
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY                         FALSE
 #endif
 
 /**
- * @brief   Enables the EXT subsystem.
+ * @brief   Enables the DAC subsystem.
  */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT                 FALSE
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                         FALSE
 #endif
 
 /**
  * @brief   Enables the GPT subsystem.
  */
 #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                 FALSE
+#define HAL_USE_GPT                         FALSE
 #endif
 
 /**
  * @brief   Enables the I2C subsystem.
  */
 #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 TRUE
+#define HAL_USE_I2C                         TRUE
 #endif
 
 /**
  * @brief   Enables the I2S subsystem.
  */
 #if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                 FALSE
+#define HAL_USE_I2S                         FALSE
 #endif
 
 /**
  * @brief   Enables the ICU subsystem.
  */
 #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                 FALSE
+#define HAL_USE_ICU                         FALSE
 #endif
 
 /**
  * @brief   Enables the MAC subsystem.
  */
 #if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                 FALSE
+#define HAL_USE_MAC                         FALSE
 #endif
 
 /**
  * @brief   Enables the MMC_SPI subsystem.
  */
 #if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI             FALSE
+#define HAL_USE_MMC_SPI                     FALSE
 #endif
 
 /**
  * @brief   Enables the PWM subsystem.
  */
 #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 TRUE
+#define HAL_USE_PWM                         TRUE
 #endif
 
 /**
  * @brief   Enables the RTC subsystem.
  */
 #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                 FALSE
+#define HAL_USE_RTC                         FALSE
 #endif
 
 /**
  * @brief   Enables the SDC subsystem.
  */
 #if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                 FALSE
+#define HAL_USE_SDC                         FALSE
 #endif
 
 /**
  * @brief   Enables the SERIAL subsystem.
  */
 #if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL              FALSE
+#define HAL_USE_SERIAL                      FALSE
 #endif
 
 /**
  * @brief   Enables the SERIAL over USB subsystem.
  */
 #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          FALSE
+#define HAL_USE_SERIAL_USB                  FALSE
+#endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO                         FALSE
 #endif
 
 /**
  * @brief   Enables the SPI subsystem.
  */
 #if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                 TRUE
+#define HAL_USE_SPI                         TRUE
+#endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG                        FALSE
 #endif
 
 /**
  * @brief   Enables the UART subsystem.
  */
 #if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                FALSE
+#define HAL_USE_UART                        FALSE
 #endif
 
 /**
  * @brief   Enables the USB subsystem.
  */
 #if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                 TRUE
+#define HAL_USE_USB                         TRUE
 #endif
 
 /**
  * @brief   Enables the WDG subsystem.
  */
 #if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                 FALSE
+#define HAL_USE_WDG                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI                        FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS                   FALSE
+#endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT                        FALSE
 #endif
 
 /*===========================================================================*/
@@ -178,7 +223,7 @@
  * @note    Disabling this option saves both code and data space.
  */
 #if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                TRUE
+#define ADC_USE_WAIT                        TRUE
 #endif
 
 /**
@@ -186,7 +231,7 @@
  * @note    Disabling this option saves both code and data space.
  */
 #if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#define ADC_USE_MUTUAL_EXCLUSION            TRUE
 #endif
 
 /*===========================================================================*/
@@ -197,7 +242,56 @@
  * @brief   Sleep mode related APIs inclusion switch.
  */
 #if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE          TRUE
+#define CAN_USE_SLEEP_MODE                  TRUE
+#endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS           FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK                FALSE
+#endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK            FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION            TRUE