Clean up Force NKRO in config.h (#19718)

5 files changed, 0 insertions, 105 deletions

diff --git a/keyboards/mechlovin/hannah910/config.h b/keyboards/mechlovin/hannah910/config.h
index 1f526461a2..a002a28f74 100644
--- a/keyboards/mechlovin/hannah910/config.h
+++ b/keyboards/mechlovin/hannah910/config.h
@@ -74,27 +74,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/mechlovin/jay60/config.h b/keyboards/mechlovin/jay60/config.h
index 5e2ed2edec..4724606324 100644
--- a/keyboards/mechlovin/jay60/config.h
+++ b/keyboards/mechlovin/jay60/config.h
@@ -77,27 +77,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/mechlovin/kay60/config.h b/keyboards/mechlovin/kay60/config.h
index 80953e6885..2277ed5fd6 100644
--- a/keyboards/mechlovin/kay60/config.h
+++ b/keyboards/mechlovin/kay60/config.h
@@ -79,27 +79,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/mechlovin/kay65/config.h b/keyboards/mechlovin/kay65/config.h
index 84f970785a..9c77efc814 100644
--- a/keyboards/mechlovin/kay65/config.h
+++ b/keyboards/mechlovin/kay65/config.h
@@ -92,27 +92,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/mechlovin/zed65/config.h b/keyboards/mechlovin/zed65/config.h
index 49487d2e30..9d87ffa437 100644
--- a/keyboards/mechlovin/zed65/config.h
+++ b/keyboards/mechlovin/zed65/config.h
@@ -58,27 +58,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */