summaryrefslogtreecommitdiffstats
path: root/keyboards/lfkeyboards/issi.c
diff options
context:
space:
mode:
authorScott Wilson <scott.t.wilson@gmail.com>2017-12-03 10:32:07 -0500
committerJack Humbert <jack.humb@gmail.com>2017-12-09 00:01:58 -0500
commitc51dfef958bce4a792b66db337d5c7cdf0956fc4 (patch)
treeb51a3d2a95c5ba47416e2964bc98c9ad329cf168 /keyboards/lfkeyboards/issi.c
parent8b1862330a960b0413046ed6fdba78d2570e7988 (diff)
Add support for LFKeyboard products: LFK78, LFK87 and SMK65
Diffstat (limited to 'keyboards/lfkeyboards/issi.c')
-rw-r--r--keyboards/lfkeyboards/issi.c244
1 files changed, 244 insertions, 0 deletions
diff --git a/keyboards/lfkeyboards/issi.c b/keyboards/lfkeyboards/issi.c
new file mode 100644
index 0000000000..e675a59868
--- /dev/null
+++ b/keyboards/lfkeyboards/issi.c
@@ -0,0 +1,244 @@
+#ifdef ISSI_ENABLE
+
+#include <stdlib.h>
+#include <stdint.h>
+#include <util/delay.h>
+#include <avr/sfr_defs.h>
+#include <avr/io.h>
+#include <util/twi.h>
+#include "issi.h"
+#include "print.h"
+#include "TWIlib.h"
+
+#define ISSI_ADDR_DEFAULT 0xE8
+
+#define ISSI_REG_CONFIG 0x00
+#define ISSI_REG_CONFIG_PICTUREMODE 0x00
+#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
+
+#define ISSI_CONF_PICTUREMODE 0x00
+#define ISSI_CONF_AUTOFRAMEMODE 0x04
+#define ISSI_CONF_AUDIOMODE 0x08
+
+#define ISSI_REG_PICTUREFRAME 0x01
+
+#define ISSI_REG_SHUTDOWN 0x0A
+#define ISSI_REG_AUDIOSYNC 0x06
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
+uint8_t control[8][9] = {
+ {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
+};
+ISSIDeviceStruct *issi_devices[4] = {0, 0, 0, 0};
+
+#ifndef cbi
+#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
+#endif
+
+#ifndef sbi
+#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
+#endif
+
+#define I2C_WRITE 0
+#define F_SCL 400000UL // SCL frequency
+#define Prescaler 1
+#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
+
+uint8_t i2c_start(uint8_t address)
+{
+ // reset TWI control register
+ TWCR = 0;
+ // transmit START condition
+ TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+ // wait for end of transmission
+ while( !(TWCR & (1<<TWINT)) );
+
+ // check if the start condition was successfully transmitted
+ if((TWSR & 0xF8) != TW_START){ return 1; }
+
+ // load slave address into data register
+ TWDR = address;
+ // start transmission of address
+ TWCR = (1<<TWINT) | (1<<TWEN);
+ // wait for end of transmission
+ while( !(TWCR & (1<<TWINT)) );
+
+ // check if the device has acknowledged the READ / WRITE mode
+ uint8_t twst = TW_STATUS & 0xF8;
+ if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
+
+ return 0;
+}
+
+uint8_t i2c_write(uint8_t data)
+{
+ // load data into data register
+ TWDR = data;
+ // start transmission of data
+ TWCR = (1 << TWINT) | (1 << TWEN);
+ // wait for end of transmission
+ while (!(TWCR & (1 << TWINT)))
+ ;
+
+ if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
+ return 1;
+ }
+ return 0;
+}
+
+uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length)
+{
+ TWBR = (uint8_t)TWBR_val;
+ if (i2c_start(address | I2C_WRITE))
+ return 1;
+ for (uint16_t i = 0; i < length; i++) {
+ if (i2c_write(data[i]))
+ return 1;
+ }
+ // transmit STOP condition
+ TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO);
+ return 0;
+}
+
+void setFrame(uint8_t device, uint8_t frame)
+{
+ static uint8_t current_frame = -1;
+ if(current_frame != frame){
+ uint8_t payload[] = {
+ ISSI_ADDR_DEFAULT | device << 1,
+ ISSI_COMMANDREGISTER,
+ frame
+ };
+ TWITransmitData(payload, sizeof(payload), 0, 1);
+ }
+ // static uint8_t current_frame = 0xFF;
+ // if(current_frame == frame){
+ // // return;
+ // }
+ // uint8_t payload[2] = { ISSI_COMMANDREGISTER, frame };
+ // i2c_transmit(ISSI_ADDR_DEFAULT | device << 1, payload, 2);
+ // current_frame = frame;
+}
+
+void writeRegister8(uint8_t device, uint8_t frame, uint8_t reg, uint8_t data)
+{
+ // Set the frame
+ setFrame(device, frame);
+
+ // Write to the register
+ uint8_t payload[] = {
+ ISSI_ADDR_DEFAULT | device << 1,
+ reg,
+ data
+ };
+ TWITransmitData(payload, sizeof(payload), 0, 1);
+}
+
+void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm)
+{
+ uint8_t device_addr = (matrix & 0x06) >> 1;
+ ISSIDeviceStruct *device = issi_devices[device_addr];
+ if(device == 0){
+ return;
+ }
+ // xprintf("activeLED: %02X %02X %02X %02X\n", matrix, cy, cx, pwm);
+ uint8_t x = cx - 1; // funciton takes 1 based counts, but we need 0...
+ uint8_t y = cy - 1; // creating them once for less confusion
+ uint8_t control_reg = (y << 1) | (matrix & 0x01);
+ if(pwm == 0){
+ cbi(device->led_ctrl[control_reg], x);
+ cbi(device->led_blink_ctrl[control_reg], x);
+ }else{
+ sbi(device->led_ctrl[control_reg], x);
+ sbi(device->led_blink_ctrl[control_reg], x);
+ }
+ uint8_t pwm_reg = 0;
+ switch(matrix & 0x01){
+ case 0:
+ pwm_reg = 0x00;
+ break;
+ case 1:
+ pwm_reg = 0x08;
+ break;
+ }
+ pwm_reg += (y << 4) + x;
+ device->led_pwm[pwm_reg] = pwm;
+ device->led_dirty = 1;
+}
+
+void update_issi(uint8_t device_addr, uint8_t blocking)
+{
+ // This seems to take about 6ms
+ ISSIDeviceStruct *device = issi_devices[device_addr];
+ if(device != 0){
+ if(device->fn_dirty){
+ device->fn_dirty = 0;
+ setFrame(device_addr, ISSI_BANK_FUNCTIONREG);
+ TWITransmitData(&device->fn_device_addr, sizeof(device->fn_registers) + 2, 0, 1);
+ }
+ if(device->led_dirty){
+ device->led_dirty = 0;
+ setFrame(device_addr, 0);
+ TWITransmitData(&device->led_device_addr, 0xB6, 0, blocking);
+ }
+ }
+}
+
+void issi_init(void)
+{
+ TWIInit();
+ for(uint8_t device_addr = 0; device_addr < 4; device_addr++){
+ // If this device has been previously allocated, free it
+ if(issi_devices[device_addr] != 0){
+ free(issi_devices[device_addr]);
+ }
+ // Try to shutdown the device, if this fails skip this device
+ writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00);
+ while (!isTWIReady()){_delay_us(1);}
+ if(TWIInfo.errorCode != 0xFF){
+ xprintf("ISSI init failed %d %02X %02X\n", device_addr, TWIInfo.mode, TWIInfo.errorCode);
+ continue;
+ }
+ // Allocate the device structure - calloc zeros it for us
+ ISSIDeviceStruct *device = (ISSIDeviceStruct *)calloc(sizeof(ISSIDeviceStruct) * 2, 1);
+ issi_devices[device_addr] = device;
+ device->fn_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1;
+ device->fn_register_addr = 0;
+ device->led_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1;
+ device->led_register_addr = 0;
+ // set dirty bits so that all of the buffered data is written out
+ device->fn_dirty = 1;
+ device->led_dirty = 1;
+ update_issi(device_addr, 1);
+ // Set the function register to picture mode
+ // device->fn_reg[ISSI_REG_CONFIG] = ISSI_REG_CONFIG_PICTUREMODE;
+ writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01);
+ }
+
+ // Shutdown and set all registers to 0
+ // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00);
+ // for(uint8_t bank = 0; bank <= 7; bank++){
+ // for (uint8_t reg = 0x00; reg <= 0xB3; reg++) {
+ // writeRegister8(device_addr, bank, reg, 0x00);
+ // }
+ // }
+ // for (uint8_t reg = 0; reg <= 0x0C; reg++) {
+ // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, reg, 0x00);
+ // }
+ // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
+ // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01);
+ // picture mode
+ // writeRegister8(ISSI_BANK_FUNCTIONREG, 0x01, 0x01);
+
+ //Enable blink
+ // writeRegister8(ISSI_BANK_FUNCTIONREG, 0x05, 0x48B);
+
+ //Enable Breath
+
+}
+
+#endif \ No newline at end of file