summaryrefslogtreecommitdiffstats
path: root/keyboards/kbd19x/rules.mk
diff options
context:
space:
mode:
authorjshuf <44121348+jshuf@users.noreply.github.com>2018-10-29 13:33:07 -0400
committerDrashna Jaelre <drashna@live.com>2018-10-29 10:33:07 -0700
commit6a629e5d0d4ed5903afa361568da8daeddc1b090 (patch)
tree63f004d9ba6007ed44fa536cbaf5116baa85a5ad /keyboards/kbd19x/rules.mk
parentcd23984afcee9a8dd2b1b44876b77141d692de45 (diff)
Keyboard: add support for kbd19x (#4272)
* 60_ansi keymap for DZ60 * 60_ansi keymap for DZ60 Amend author * 60_ansi keymap for DZ60 * Merge new phantom layout from dev branch * Initial util/new_project files * Progress checkpoint (compiles, but untested) * Progress snapshot, still working on layout graphics * Add layer images * Tidy up formatting * First cut at info.json for kbd19x default layout * Add default keymap * add all-keys layout * clean up documentation * Update keyboards/kbd19x/info.json Co-Authored-By: jshuf <44121348+jshuf@users.noreply.github.com> * Update keyboards/kbd19x/rules.mk Co-Authored-By: jshuf <44121348+jshuf@users.noreply.github.com> * Change layout name from default to ansi
Diffstat (limited to 'keyboards/kbd19x/rules.mk')
-rw-r--r--keyboards/kbd19x/rules.mk80
1 files changed, 80 insertions, 0 deletions
diff --git a/keyboards/kbd19x/rules.mk b/keyboards/kbd19x/rules.mk
new file mode 100644
index 0000000000..8e50962afa
--- /dev/null
+++ b/keyboards/kbd19x/rules.mk
@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)