Move matrix config to info.json, part 2 (#19987)

24 files changed, 60 insertions, 185 deletions

diff --git a/keyboards/hineybush/h08_ocelot/config.h b/keyboards/hineybush/h08_ocelot/config.h
index 7037db7735..27c2811e68 100644
--- a/keyboards/hineybush/h08_ocelot/config.h
+++ b/keyboards/hineybush/h08_ocelot/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B4, B6 }
-#define MATRIX_COL_PINS { F4, C7, D0, D1 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN F1
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 7
diff --git a/keyboards/hineybush/h08_ocelot/info.json b/keyboards/hineybush/h08_ocelot/info.json
index d7e395285b..439b37e379 100644
--- a/keyboards/hineybush/h08_ocelot/info.json
+++ b/keyboards/hineybush/h08_ocelot/info.json
@@ -8,6 +8,11 @@
         "pid": "0xE8E9",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "C7", "D0", "D1"],
+        "rows": ["B4", "B6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/hineybush/h10/config.h b/keyboards/hineybush/h10/config.h
index 2fc1c25eb6..994b108d8e 100644
--- a/keyboards/hineybush/h10/config.h
+++ b/keyboards/hineybush/h10/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B0, C6, B6, B5, B4, D7 }
-#define MATRIX_COL_PINS { F0, C7, B1, B2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/hineybush/h10/info.json b/keyboards/hineybush/h10/info.json
index e59ba7f3e4..d63c6da200 100644
--- a/keyboards/hineybush/h10/info.json
+++ b/keyboards/hineybush/h10/info.json
@@ -8,6 +8,11 @@
         "pid": "0xEBD8",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "C7", "B1", "B2"],
+        "rows": ["B0", "C6", "B6", "B5", "B4", "D7"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7",
         "breathing": true
diff --git a/keyboards/hineybush/h60/config.h b/keyboards/hineybush/h60/config.h
index ca8f344793..c0365b76e7 100644
--- a/keyboards/hineybush/h60/config.h
+++ b/keyboards/hineybush/h60/config.h
@@ -17,13 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_ROW_PINS { B6, B5, B4, D7, E6 }
-#define MATRIX_COL_PINS { B3, D0, D1, D2, D3, D5, D6, C7, F0, F1, F4, F5, F6, F7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN B0
  #ifdef RGB_DI_PIN
    #define RGBLED_NUM 16
diff --git a/keyboards/hineybush/h60/info.json b/keyboards/hineybush/h60/info.json
index eece82f5f2..7defbee93c 100644
--- a/keyboards/hineybush/h60/info.json
+++ b/keyboards/hineybush/h60/info.json
@@ -8,6 +8,11 @@
         "pid": "0xEBBE",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B3", "D0", "D1", "D2", "D3", "D5", "D6", "C7", "F0", "F1", "F4", "F5", "F6", "F7"],
+        "rows": ["B6", "B5", "B4", "D7", "E6"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7",
         "levels": 12
diff --git a/keyboards/hineybush/h65/config.h b/keyboards/hineybush/h65/config.h
index 925f0498ca..49d4991b06 100644
--- a/keyboards/hineybush/h65/config.h
+++ b/keyboards/hineybush/h65/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D7, D6, D4, D1, D0 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, B0, B1, B2, B3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D2
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 17
diff --git a/keyboards/hineybush/h65/info.json b/keyboards/hineybush/h65/info.json
index e1bebb560c..70ccfc19d3 100644
--- a/keyboards/hineybush/h65/info.json
+++ b/keyboards/hineybush/h65/info.json
@@ -8,6 +8,11 @@
         "pid": "0xE9E4",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "B0", "B1", "B2", "B3"],
+        "rows": ["D7", "D6", "D4", "D1", "D0"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7",
         "breathing": true
diff --git a/keyboards/hineybush/h65_hotswap/config.h b/keyboards/hineybush/h65_hotswap/config.h
index 925f0498ca..49d4991b06 100644
--- a/keyboards/hineybush/h65_hotswap/config.h
+++ b/keyboards/hineybush/h65_hotswap/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D7, D6, D4, D1, D0 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, B0, B1, B2, B3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D2
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 17
diff --git a/keyboards/hineybush/h65_hotswap/info.json b/keyboards/hineybush/h65_hotswap/info.json
index 9eebb77345..457f09921a 100644
--- a/keyboards/hineybush/h65_hotswap/info.json
+++ b/keyboards/hineybush/h65_hotswap/info.json
@@ -8,6 +8,11 @@
         "pid": "0xE8B7",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "B0", "B1", "B2", "B3"],
+        "rows": ["D7", "D6", "D4", "D1", "D0"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7",
         "breathing": true
diff --git a/keyboards/hineybush/h660s/config.h b/keyboards/hineybush/h660s/config.h
index e8e84f1117..707d202266 100644
--- a/keyboards/hineybush/h660s/config.h
+++ b/keyboards/hineybush/h660s/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B1, E6, B3, D3, D2 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN B0
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 16
diff --git a/keyboards/hineybush/h660s/info.json b/keyboards/hineybush/h660s/info.json
index d773651ee6..8faaa2f505 100644
--- a/keyboards/hineybush/h660s/info.json
+++ b/keyboards/hineybush/h660s/info.json
@@ -8,6 +8,11 @@
         "pid": "0xEB1B",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5"],
+        "rows": ["B1", "E6", "B3", "D3", "D2"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7",
         "breathing": true
diff --git a/keyboards/hineybush/h75_singa/config.h b/keyboards/hineybush/h75_singa/config.h
index 55b920a2b9..45e93b7ebd 100644
--- a/keyboards/hineybush/h75_singa/config.h
+++ b/keyboards/hineybush/h75_singa/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B0, B1, D0, D1, D2, D6 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, B2, D4, D5, D3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN B3
 #ifdef RGB_DI_PIN
    #define RGBLED_NUM 22
diff --git a/keyboards/hineybush/h75_singa/info.json b/keyboards/hineybush/h75_singa/info.json
index 94e8d256fd..3114f46d35 100644
--- a/keyboards/hineybush/h75_singa/info.json
+++ b/keyboards/hineybush/h75_singa/info.json
@@ -8,6 +8,11 @@
         "pid": "0xEC9A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "B2", "D4", "D5", "D3"],
+        "rows": ["B0", "B1", "D0", "D1", "D2", "D6"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7",
         "breathing": true
diff --git a/keyboards/hineybush/h87a/config.h b/keyboards/hineybush/h87a/config.h
index f267f09020..652b910feb 100644
--- a/keyboards/hineybush/h87a/config.h
+++ b/keyboards/hineybush/h87a/config.h
@@ -17,22 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, D0, D1, B5, B6, D7, B4, D6, D4 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, D2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/hineybush/h87a/info.json b/keyboards/hineybush/h87a/info.json
index db1fd91d13..2baf4c7e5e 100644
--- a/keyboards/hineybush/h87a/info.json
+++ b/keyboards/hineybush/h87a/info.json
@@ -8,6 +8,11 @@
         "pid": "0xECE9",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "D2"],
+        "rows": ["B0", "B1", "B2", "B3", "D0", "D1", "B5", "B6", "D7", "B4", "D6", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7"
     },
diff --git a/keyboards/hineybush/h88/config.h b/keyboards/hineybush/h88/config.h
index 9a75238cb3..3f57906377 100644
--- a/keyboards/hineybush/h88/config.h
+++ b/keyboards/hineybush/h88/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, D0, D1, B5, B6, D7, B4, D6, D4 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, D2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/hineybush/h88/info.json b/keyboards/hineybush/h88/info.json
index bd362c74b5..acab34777a 100644
--- a/keyboards/hineybush/h88/info.json
+++ b/keyboards/hineybush/h88/info.json
@@ -8,6 +8,11 @@
         "pid": "0xECA2",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "D2"],
+        "rows": ["B0", "B1", "B2", "B3", "D0", "D1", "B5", "B6", "D7", "B4", "D6", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7"
     },
diff --git a/keyboards/hineybush/hineyg80/config.h b/keyboards/hineybush/hineyg80/config.h
index acf19753f5..b44dfaac52 100644
--- a/keyboards/hineybush/hineyg80/config.h
+++ b/keyboards/hineybush/hineyg80/config.h
@@ -1,13 +1,5 @@
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B2, B3, D0, B1, D2, D1, D5, D3, D6, D4, B4, D7 }
-#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, B7, B0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 
diff --git a/keyboards/hineybush/hineyg80/info.json b/keyboards/hineybush/hineyg80/info.json
index dcc3aa5f29..2df90c7957 100644
--- a/keyboards/hineybush/hineyg80/info.json
+++ b/keyboards/hineybush/hineyg80/info.json
@@ -8,6 +8,11 @@
         "pid": "0x6060",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C7", "F7", "F6", "F5", "F4", "F1", "F0", "B7", "B0"],
+        "rows": ["B2", "B3", "D0", "B1", "D2", "D1", "D5", "D3", "D6", "D4", "B4", "D7"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "B6",
         "num_lock": "C6",
diff --git a/keyboards/hineybush/physix/config.h b/keyboards/hineybush/physix/config.h
index ee7b90de23..77d8169cfe 100644
--- a/keyboards/hineybush/physix/config.h
+++ b/keyboards/hineybush/physix/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D0, D1, D2, C7, C6 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B3, B2, B1, B0, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN E6
 #ifdef RGB_DI_PIN
    #define RGBLED_NUM 26
diff --git a/keyboards/hineybush/physix/info.json b/keyboards/hineybush/physix/info.json
index b611de62e4..597beceb54 100644
--- a/keyboards/hineybush/physix/info.json
+++ b/keyboards/hineybush/physix/info.json
@@ -8,6 +8,11 @@
         "pid": "0xEC81",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "B3", "B2", "B1", "B0", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["D0", "D1", "D2", "C7", "C6"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7",
         "breathing": true
diff --git a/keyboards/hineybush/sm68/config.h b/keyboards/hineybush/sm68/config.h
index c11c6431ce..95d44f631d 100644
--- a/keyboards/hineybush/sm68/config.h
+++ b/keyboards/hineybush/sm68/config.h
@@ -17,24 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B2, B1, B0, D4, D1 }
-#define MATRIX_COL_PINS { E6, F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D3, D2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-
 #define RGB_DI_PIN D0
 #ifdef RGB_DI_PIN
    #define RGBLED_NUM 16
diff --git a/keyboards/hineybush/sm68/info.json b/keyboards/hineybush/sm68/info.json
index 642e7b5e07..94765a6a14 100644
--- a/keyboards/hineybush/sm68/info.json
+++ b/keyboards/hineybush/sm68/info.json
@@ -8,6 +8,11 @@
         "pid": "0xEC9F",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["E6", "F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D3", "D2"],
+        "rows": ["B2", "B1", "B0", "D4", "D1"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {