Helix/pico move to split_common (#16418)

4 files changed, 21 insertions, 140 deletions

diff --git a/keyboards/helix/pico/keymaps/default/keymap.c b/keyboards/helix/pico/keymaps/default/keymap.c
index f23ab85761..11ee30258c 100644
--- a/keyboards/helix/pico/keymaps/default/keymap.c
+++ b/keyboards/helix/pico/keymaps/default/keymap.c
@@ -1,24 +1,25 @@
+/* Copyright 2018 MakotoKurauchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include QMK_KEYBOARD_H
-#include "bootloader.h"
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#include "split_util.h"
-#endif
-#ifdef AUDIO_ENABLE
-  #include "audio.h"
-#endif
-#ifdef SSD1306OLED
-  #include "ssd1306.h"
-#endif
-
 
 #ifdef RGBLIGHT_ENABLE
 //Following line allows macro to read current RGB settings
 extern rgblight_config_t rgblight_config;
 #endif
 
-extern uint8_t is_master;
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -334,10 +335,6 @@ void matrix_init_user(void) {
     #ifdef RGBLIGHT_ENABLE
       RGB_current_mode = rgblight_config.mode;
     #endif
-    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-    #ifdef SSD1306OLED
-        iota_gfx_init(!has_usb());   // turns on the display
-    #endif
 }
 
 
@@ -365,105 +362,3 @@ void music_scale_user(void)
 }
 
 #endif
-
-
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
-
-void matrix_scan_user(void) {
-     iota_gfx_task();  // this is what updates the display continuously
-}
-
-void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-//assign the right code to your layers for OLED display
-#define L_BASE 0
-#define L_LOWER (1<<_LOWER)
-#define L_RAISE (1<<_RAISE)
-#define L_ADJUST (1<<_ADJUST)
-#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
-
-static void render_logo(struct CharacterMatrix *matrix) {
-
-  static char logo[]={
-    0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
-    0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
-    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
-    0};
-  matrix_write(matrix, logo);
-  //matrix_write_P(&matrix, PSTR(" Split keyboard kit"));
-}
-
-
-
-void render_status(struct CharacterMatrix *matrix) {
-
-  // Render to mode icon
-  static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
-  if(keymap_config.swap_lalt_lgui==false){
-    matrix_write(matrix, logo[0][0]);
-    matrix_write_P(matrix, PSTR("\n"));
-    matrix_write(matrix, logo[0][1]);
-  }else{
-    matrix_write(matrix, logo[1][0]);
-    matrix_write_P(matrix, PSTR("\n"));
-    matrix_write(matrix, logo[1][1]);
-  }
-
-  // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
-  matrix_write_P(matrix, PSTR("\nLayer: "));
-    switch (layer_state) {
-        case L_BASE:
-           matrix_write_P(matrix, PSTR("Default"));
-           break;
-        case L_RAISE:
-           matrix_write_P(matrix, PSTR("Raise"));
-           break;
-        case L_LOWER:
-           matrix_write_P(matrix, PSTR("Lower"));
-           break;
-        case L_ADJUST:
-        case L_ADJUST_TRI:
-           matrix_write_P(matrix, PSTR("Adjust"));
-           break;
-        default:
-           matrix_write(matrix, buf);
-    }
-
-  // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(matrix, led);
-}
-
-
-void iota_gfx_task_user(void) {
-  struct CharacterMatrix matrix;
-
-#if DEBUG_TO_SCREEN
-  if (debug_enable) {
-    return;
-  }
-#endif
-
-  matrix_clear(&matrix);
-  if(is_master){
-    render_status(&matrix);
-  }else{
-    render_logo(&matrix);
-  }
-  matrix_update(&display, &matrix);
-}
-
-#endif
diff --git a/keyboards/helix/pico/keymaps/default/readme.md b/keyboards/helix/pico/keymaps/default/readme.md
index 789097021b..a6c81651a3 100644
--- a/keyboards/helix/pico/keymaps/default/readme.md
+++ b/keyboards/helix/pico/keymaps/default/readme.md
@@ -96,10 +96,8 @@ see `qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk`
 
 ```
 # Helix Spacific Build Options
-# you can uncomment and edit follows 6 Variables
-#  jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。
-# OLED_ENABLE = no            # OLED_ENABLE
-# LOCAL_GLCDFONT = no         # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+# you can uncomment and edit follows 4 Variables
+#  jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。
 # LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
 # LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
 # LED_ANIMATIONS = yes        # LED animations
diff --git a/keyboards/helix/pico/keymaps/default/readme_jp.md b/keyboards/helix/pico/keymaps/default/readme_jp.md
index 28594dafcb..73f97ad9a6 100644
--- a/keyboards/helix/pico/keymaps/default/readme_jp.md
+++ b/keyboards/helix/pico/keymaps/default/readme_jp.md
@@ -58,16 +58,13 @@
 
 ## カスタマイズ
 
-オプションの OLED をつけたり、
 RGB バックライトまたは、RGB Underglow をつけた場合は、
 `qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk` の以下の部分を編集して機能を有効化してください。
 
 ```
 # Helix Spacific Build Options
-# you can uncomment and edit follows 6 Variables
-#  jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。
-# OLED_ENABLE = no            # OLED_ENABLE
-# LOCAL_GLCDFONT = no         # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+# you can uncomment and edit follows 4 Variables
+#  jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。
 # LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
 # LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
 # LED_ANIMATIONS = yes        # LED animations
@@ -89,13 +86,6 @@ rules.mk の下記の部分を編集して no を yes に変更してくださ�
 LED_UNDERGLOW_ENABLE = yes   # LED underglow (Enable WS2812 RGB underlight.)
 ```
 
-## OLEDを有効にする
-
-rules.mk の下記の部分を編集して no を yes に変更してください。
-```
-OLED_ENABLE = yes            # OLED_ENABLE
-```
-
 ## iPad/iPhoneサポートを有効にする。
 
 rules.mk の下記の部分を編集して no を yes に変更してください。
diff --git a/keyboards/helix/pico/keymaps/default/rules.mk b/keyboards/helix/pico/keymaps/default/rules.mk
index b50519fef5..9a29406c17 100644
--- a/keyboards/helix/pico/keymaps/default/rules.mk
+++ b/keyboards/helix/pico/keymaps/default/rules.mk
@@ -3,10 +3,8 @@ AUDIO_ENABLE = yes          # Audio output
 LTO_ENABLE = no  # if firmware size over limit, try this option
 
 # Helix Spacific Build Options
-# you can uncomment and edit follows 6 Variables
-#  jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。
-# OLED_ENABLE = no            # OLED_ENABLE
-# LOCAL_GLCDFONT = no         # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+# you can uncomment and edit follows 4 Variables
+#  jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。
 # LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
 # LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
 # LED_ANIMATIONS = yes        # LED animations