Merge remote-tracking branch 'origin/master' into develop

1 files changed, 104 insertions, 0 deletions

diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h
new file mode 100644
index 0000000000..f9a44587b0
--- /dev/null
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h
@@ -0,0 +1,104 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define PRODUCT Tractyl Manuform(5x6) Proton C
+
+// wiring of each half
+#define MATRIX_COL_PINS \
+    { B0, B1, B2, B3, B4, B5 }
+#define MATRIX_ROW_PINS \
+    { B10, B11, B12, A14, A13, A15 }
+
+#define UNUSED_PINS \
+    { A0, A2, A7, A8 }
+// B2 used for BOOT1, has internal pull down?
+// A9 has internal pull-down
+// A11 and A12 are used for USB sense.  DO NOT USE.
+
+#define DIODE_DIRECTION     COL2ROW
+
+// #define USB_VBUS_PIN        B10
+#define SPLIT_HAND_PIN      C14  // high = left, low = right
+
+// WS2812 RGB LED strip input and number of LEDs
+#define RGB_DI_PIN          A6
+#define WS2812_PWM_DRIVER   PWMD3  // default: PWMD2
+#define WS2812_PWM_CHANNEL  1      // default: 2
+#define WS2812_PWM_PAL_MODE 2      // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
+// #define WS2812_DMA_STREAM   STM32_DMA1_STREAM3  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#define WS2812_DMA_CHANNEL  3  // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+
+#define RGBLED_NUM          20
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT \
+    { 10, 10 }
+
+#define DEBUG_LED_PIN C13
+
+/* Audio config */
+#define AUDIO_PIN     A5
+#define AUDIO_PIN_ALT A4
+#define AUDIO_PIN_ALT_AS_NEGATIVE
+
+/* serial.c configuration for split keyboard */
+#define SERIAL_USART_FULL_DUPLEX  // Enable full duplex operation mode.
+#define SERIAL_USART_TX_PIN      A9
+#define SERIAL_USART_RX_PIN      A10
+#define SERIAL_USART_DRIVER      SD1
+#define SERIAL_USART_TX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+#define SERIAL_USART_RX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+#define SERIAL_USART_TIMEOUT     100  // USART driver timeout. default 100
+
+/* i2c config for oleds */
+#define I2C_DRIVER               I2CD1
+#define I2C1_SCL_PIN             B6
+#define I2C1_SDA_PIN             B7
+#define I2C1_SCL_PAL_MODE        4
+#define I2C1_SDA_PAL_MODE        4
+#define I2C1_CLOCK_SPEED         400000
+
+/* encoder config */
+#define ENCODERS_PAD_A \
+    { A7 }
+#define ENCODERS_PAD_B \
+    { A8 }
+
+/* spi config for eeprom and pmw3360 sensor */
+#define SPI_DRIVER                           SPID2
+#define SPI_SCK_PIN                          B13
+#define SPI_SCK_PAL_MODE                     5
+#define SPI_MOSI_PIN                         B15
+#define SPI_MOSI_PAL_MODE                    5
+#define SPI_MISO_PIN                         B14
+#define SPI_MISO_PAL_MODE                    5
+
+/* eeprom config */
+#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN B8
+#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR    8
+// #define EXTERNAL_EEPROM_BYTE_COUNT           8196
+// #define EXTERNAL_EEPROM_PAGE_SIZE            32
+// #define EXTERNAL_EEPROM_ADDRESS_SIZE         2
+// #define DEBUG_EEPROM_OUTPUT
+
+/* pmw3360 config  */
+#define PMW3360_CS_PIN                       B9
+#define PMW3360_SPI_MODE                     3
+#define PMW3360_SPI_DIVISOR                  8