summaryrefslogtreecommitdiffstats
path: root/keyboards/handwired/terminus_mini/rules.mk
diff options
context:
space:
mode:
authormogranjm <32807665+mogranjm@users.noreply.github.com>2017-10-18 03:42:27 +1100
committerJack Humbert <jack.humb@gmail.com>2017-10-17 06:42:27 -1000
commitd3fe6a0588965b71c6876b060d05abfceabacbb5 (patch)
treefd38fecbd5b0f962e411a35c30e0ed163fad1740 /keyboards/handwired/terminus_mini/rules.mk
parentaf4697cba5114d79027b900d94fc1462324c006a (diff)
Add terminus_mini keyboard and nyquist/DivergeJM layout (#1851)
* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware * Fix terminus_mini & nyquist/DivergeJM readme files Previously an outdated copy of the default readme. Updated to match the Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout) * Update makefiles to rules.mk Renamed both Makefiles to rules.mk, removed references to makefiles * Updated rules.mk Inadvertantly removed important code from the rules.mk in previous commit. This has been restored. Also disabled Tap_Dance in both rules.mk files * Moved terminus_mini to handwired Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.
Diffstat (limited to 'keyboards/handwired/terminus_mini/rules.mk')
-rw-r--r--keyboards/handwired/terminus_mini/rules.mk69
1 files changed, 69 insertions, 0 deletions
diff --git a/keyboards/handwired/terminus_mini/rules.mk b/keyboards/handwired/terminus_mini/rules.mk
new file mode 100644
index 0000000000..d7acbf7d52
--- /dev/null
+++ b/keyboards/handwired/terminus_mini/rules.mk
@@ -0,0 +1,69 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+TAP_DANCE_ENABLE = no # Enable tap dance