Merge remote-tracking branch 'origin/master' into develop

1 files changed, 524 insertions, 0 deletions

diff --git a/keyboards/geminate60/halconf.h b/keyboards/geminate60/halconf.h
new file mode 100644
index 0000000000..b6c7b392ca
--- /dev/null
+++ b/keyboards/geminate60/halconf.h
@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#    define HALCONF_H
+
+#    define _CHIBIOS_HAL_CONF_
+#    define _CHIBIOS_HAL_CONF_VER_7_0_
+
+#    include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#    if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#        define HAL_USE_PAL TRUE
+#    endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#    if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#        define HAL_USE_ADC FALSE
+#    endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#    if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#        define HAL_USE_CAN FALSE
+#    endif
+
+/**
+ * @brief   Enables the cryptographic subsystem.
+ */
+#    if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#        define HAL_USE_CRY FALSE
+#    endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#    if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#        define HAL_USE_DAC TRUE
+#    endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#    if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#        define HAL_USE_GPT TRUE
+#    endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#    if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#        define HAL_USE_I2C TRUE
+#    endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#    if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#        define HAL_USE_I2S FALSE
+#    endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#    if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#        define HAL_USE_ICU FALSE
+#    endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#    if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#        define HAL_USE_MAC FALSE
+#    endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#    if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#        define HAL_USE_MMC_SPI FALSE
+#    endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#    if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#        define HAL_USE_PWM TRUE
+#    endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#    if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#        define HAL_USE_RTC FALSE
+#    endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#    if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#        define HAL_USE_SDC FALSE
+#    endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#    if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#        define HAL_USE_SERIAL FALSE
+#    endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#    if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#        define HAL_USE_SERIAL_USB TRUE
+#    endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#    if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#        define HAL_USE_SIO FALSE
+#    endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#    if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#        define HAL_USE_SPI TRUE
+#    endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#    if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#        define HAL_USE_TRNG FALSE
+#    endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#    if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#        define HAL_USE_UART FALSE
+#    endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#    if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#        define HAL_USE_USB TRUE
+#    endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#    if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#        define HAL_USE_WDG FALSE
+#    endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#    if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#        define HAL_USE_WSPI FALSE
+#    endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#        define PAL_USE_CALLBACKS TRUE
+#    endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#        define PAL_USE_WAIT TRUE
+#    endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#        define ADC_USE_WAIT TRUE
+#    endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#        define ADC_USE_MUTUAL_EXCLUSION TRUE
+#    endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#    if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#        define CAN_USE_SLEEP_MODE TRUE
+#    endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#    if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#        define CAN_ENFORCE_USE_CALLBACKS FALSE
+#    endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#    if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#        define HAL_CRY_USE_FALLBACK FALSE
+#    endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#    if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#        define HAL_CRY_ENFORCE_FALLBACK FALSE
+#    endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#        define DAC_USE_WAIT TRUE
+#    endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#        define DAC_USE_MUTUAL_EXCLUSION TRUE
+#    endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#    if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#        define I2C_USE_MUTUAL_EXCLUSION TRUE
+#    endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the zero-copy API.
+ */
+#    if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#        define MAC_USE_ZERO_COPY FALSE
+#    endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#    if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#        define MAC_USE_EVENTS TRUE
+#    endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#    if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#        define MMC_NICE_WAITING TRUE
+#    endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#    if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#        define SDC_INIT_RETRY 100
+#    endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#    if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#        define SDC_MMC_SUPPORT FALSE
+#    endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#    if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#        define SDC_NICE_WAITING TRUE
+#    endif
+
+/**
+ * @brief   OCR initialization constant for V20 cards.
+ */
+#    if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#        define SDC_INIT_OCR_V20 0x50FF8000U
+#    endif
+
+/**
+ * @brief   OCR initialization constant for non-V20 cards.
+ */
+#    if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#        define SDC_INIT_OCR 0x80100000U
+#    endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#    if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#        define SERIAL_DEFAULT_BITRATE 38400
+#    endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#    if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#        define SERIAL_BUFFERS_SIZE 16
+#    endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#    if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#        define SERIAL_USB_BUFFERS_SIZE 1
+#    endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#    if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#        define SERIAL_USB_BUFFERS_NUMBER 2
+#    endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#        define SPI_USE_WAIT TRUE
+#    endif
+
+/**
+ * @brief   Enables circular transfers APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#        define SPI_USE_CIRCULAR FALSE
+#    endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#        define SPI_USE_MUTUAL_EXCLUSION TRUE
+#    endif
+
+/**
+ * @brief   Handling method for SPI CS line.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#        define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+#    endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#        define UART_USE_WAIT FALSE
+#    endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#        define UART_USE_MUTUAL_EXCLUSION FALSE
+#    endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#        define USB_USE_WAIT TRUE
+#    endif
+
+/*===========================================================================*/
+/* WSPI driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#        define WSPI_USE_WAIT TRUE
+#    endif
+
+/**
+ * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#        define WSPI_USE_MUTUAL_EXCLUSION TRUE
+#    endif
+
+#endif /* HALCONF_H */
+
+/** @} */