2020 November 28 Breaking Changes Update (#11053)

* Branch point for 2020 November 28 Breaking Change                                                

* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)                                           

* Add support for soft serial to ATmega32U2 (#10204)                                               

* Change MIDI velocity implementation to allow direct control of velocity value (#9940)            

* Add ability to build a subset of all keyboards based on platform.                                

* Actually use eeprom_driver_init().                                                               

* Make bootloader_jump weak for ChibiOS. (#10417)                                                  

* Joystick 16-bit support (#10439)                                                                 

* Per-encoder resolutions (#10259)                                                                 

* Share button state from mousekey to pointing_device (#10179)                                     

* Add hotfix for chibios keyboards not wake (#10088)                                               

* Add advanced/efficient RGB Matrix Indicators (#8564)                                             

* Naming change.                                                                                   

* Support for STM32 GPIOF,G,H,I,J,K (#10206)                                                       

* Add milc as a dependency and remove the installed milc (#10563)                                  

* ChibiOS upgrade: early init conversions (#10214)                                                 

* ChibiOS upgrade: configuration file migrator (#9952)                                             

* Haptic and solenoid cleanup (#9700)                                                              

* XD75 cleanup (#10524)                                                                            

* OLED display update interval support (#10388)                                                    

* Add definition based on currently-selected serial driver. (#10716)                               

* New feature: Retro Tapping per key (#10622)                                                      

* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)             

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)

* Rescale both ChibiOS and AVR backlighting.                                                       

* Reduce Helix keyboard build variation (#8669)                                                    

* Minor change to behavior allowing display updates to continue between task ticks (#10750)        

* Some GPIO manipulations in matrix.c change to atomic. (#10491)                                   

* qmk cformat (#10767)                                                                             

* [Keyboard] Update the Speedo firmware for v3.0 (#10657)                                          

* Maartenwut/Maarten namechange to evyd13/Evy (#10274)                                             

* [quantum] combine repeated lines of code (#10837)                                                

* Add step sequencer feature (#9703)                                                               

* aeboards/ext65 refactor (#10820)                                                                 

* Refactor xelus/dawn60 for Rev2 later (#10584)                                                    

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)                                 

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)                                    

* update chibios os usb for the otg driver (#8893)                                                 

* Remove HD44780 References, Part 4 (#10735)                                                       

* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)                                                

* Fix cursor position bug in oled_write_raw functions (#10800)                                     

* Fixup version.h writing when using SKIP_VERSION=yes (#10972)                                     

* Allow for certain code in the codebase assuming length of string. (#10974)                       

* Add AT90USB support for serial.c (#10706)                                                        

* Auto shift: support repeats and early registration (#9826)                                       

* Rename ledmatrix.h to match .c file (#7949)                                                      

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)                                        

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)                                        

* Merge point for 2020 Nov 28 Breaking Change                                                      

2 files changed, 151 insertions, 0 deletions

diff --git a/keyboards/evyd13/atom47/keymaps/junonum_a47/keymap.c b/keyboards/evyd13/atom47/keymaps/junonum_a47/keymap.c
new file mode 100644
index 0000000000..ebd52ffd03
--- /dev/null
+++ b/keyboards/evyd13/atom47/keymaps/junonum_a47/keymap.c
@@ -0,0 +1,150 @@
+#include QMK_KEYBOARD_H
+
+/* enum custom_keycodes {
+  SHIFTEN = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  SPACFNL,
+  SPACFNR,
+  MAIN,
+  ADJUST
+}; */
+
+#define _MAIN 0
+#define _SPLEFT 1
+#define _SPRIGHT 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 5
+
+#define _DPAD 6
+#define _DPADNUM 7
+
+
+#define SHIFTEN RSFT_T(KC_ENT)
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define SPACFNL LT(_SPLEFT, KC_SPC)
+#define SPACFNR LT(_SPRIGHT, KC_SPC)
+
+#define DP_ON TO(_DPAD)
+#define DP_OFF TO(_MAIN)
+#define DPADNUM MO(_DPADNUM)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	
+	// Primary layer	
+	[_MAIN] = LAYOUT(
+	  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,
+	  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_QUOT,
+	  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	SHIFTEN,
+	  KC_LCTL,		KC_LGUI,	KC_LALT,	LOWER,					SPACFNL, 				SPACFNR,				RAISE,		KC_RALT,	KC_APP,		KC_RCTRL
+	),
+
+	// Main Fn navigation layer
+	[_SPLEFT] = LAYOUT(
+	  _______,		KC_VOLU, 	KC_PGUP, 	KC_UP,   	KC_PGDN, 	KC_INS,  	_______, 	_______, 	KC_UP,   	_______, 	KC_PSCR,	_______,	_______,	
+	  _______,		KC_VOLD, 	KC_LEFT, 	KC_DOWN, 	KC_RGHT, 	KC_HOME, 	_______, 	KC_LEFT, 	KC_DOWN, 	KC_RGHT, 	_______, 				KC_DEL , 	
+	  _______,					_______,    KC_MPRV, 	KC_MPLY, 	KC_MNXT, 	KC_END,  	_______, 	_______, 	KC_VOLD, 	KC_VOLU, 	KC_MUTE,	_______,	
+	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______
+	),	
+
+	// Primary numeric layer using right Spacebar
+	[_SPRIGHT] = LAYOUT(
+	  KC_GRV,		_______,	_______,	KC_LBRC, 	KC_RBRC,	_______,	_______,	KC_7,		KC_8,		KC_9,		KC_0,		_______,	_______,	
+	  _______,		_______,	_______,	KC_LCBR, 	KC_RCBR,	_______,	_______,	KC_4,		KC_5,		KC_6,	 	KC_MINUS, 				KC_BSLS, 	
+	  _______,					_______,	_______,	_______,	_______,	_______,	_______,	KC_1,		KC_2,		KC_3,		KC_EQUAL,	_______,	
+	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______
+	),	
+
+	// Secondary symbol layer, also Lower
+	[_LOWER] = LAYOUT(
+	  KC_TILD, 		_______,	_______,	_______,	_______,	_______,	_______, 	KC_AMPR, 	KC_ASTR, 	KC_LPRN, 	KC_RPRN,	KC_SLCK,	KC_PAUS,	
+	  KC_CAPS,		KC_F1,   	KC_F2,   	KC_F3,   	KC_F4,   	KC_F5,   	KC_F6,		KC_DLR,  	KC_PERC, 	KC_CIRC, 	KC_UNDS, 				KC_PIPE,	
+	  _______,					KC_F7,   	KC_F8,   	KC_F9,   	KC_F10,  	KC_F11,  	KC_F12,		KC_EXLM, 	KC_AT,   	KC_HASH, 	KC_PLUS,	_______,	
+	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	KC_VOLD, 	KC_VOLU, 	KC_MPLY
+	),	
+	  
+	// Numpad layer // Also a homage to Planck with the media player/pause button
+	[_RAISE] = LAYOUT(
+	  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	
+	  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,
+	  _______,					_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	
+	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	KC_VOLD, 	KC_VOLU, 	KC_MPLY
+	),	
+
+	// Safety layer for special functions
+	[_ADJUST] = LAYOUT(
+	  _______,		RESET,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+	  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,
+	  _______,					_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	DP_ON,
+	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______
+	),
+	
+	[_DPAD] = LAYOUT(
+	  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,
+	  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_QUOT,
+	  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_UP,		KC_ENT,
+	  KC_LCTL,		KC_LGUI,	KC_LALT,	XXXXXXX,				DPADNUM, 				KC_SPC,					DP_OFF,		KC_LEFT,	KC_DOWN,	KC_RGHT
+	),
+	
+	[_DPADNUM] = LAYOUT(
+	  _______,		KC_1,		KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		_______,	_______,
+	  _______,		_______,	_______,	_______,	_______,	KC_F1,   	KC_F2,   	KC_F3,   	KC_F4,   	KC_F5,   	KC_F6,					_______,
+	  _______,					_______,	_______,	_______,	_______,	KC_F7,   	KC_F8,   	KC_F9,   	KC_F10,  	KC_F11,  	KC_F12,		_______,
+	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______
+	),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+/*     case MAIN:
+      if (record->event.pressed) {
+        persistant_default_layer_set(1UL<<_MAIN);
+      }
+      return false;
+      break; */
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+/*     case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break; */
+  }
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+ 	   	writePinLow(E6);
+
+
+    } else {
+        // Turn capslock off
+    	writePinHigh(E6);
+    }
+}
diff --git a/keyboards/evyd13/atom47/keymaps/junonum_a47/readme.md b/keyboards/evyd13/atom47/keymaps/junonum_a47/readme.md
new file mode 100644
index 0000000000..42d8370231
--- /dev/null
+++ b/keyboards/evyd13/atom47/keymaps/junonum_a47/readme.md
@@ -0,0 +1 @@
+Juno's junonum keymap adapted for Atom47.
\ No newline at end of file