[Keyboard] add dz60rgb keyboard (#4992)

* add dz60rgb keyboard

* add info.json

* Update config.h

* Update rules.mk

* Update dz60rgb.h

* Update dz60rgb.c

* Update keymap.c

* Update dz60rgb.h

* Create readme.md

* Update readme.md

* Update keymap.c

* Update dz60rgb.h

* Update info.json

11 files changed, 1649 insertions, 0 deletions

diff --git a/keyboards/dztech/dz60rgb/bootloader_defs.h b/keyboards/dztech/dz60rgb/bootloader_defs.h
new file mode 100644
index 0000000000..3b0e9d20a6
--- /dev/null
+++ b/keyboards/dztech/dz60rgb/bootloader_defs.h
@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
diff --git a/keyboards/dztech/dz60rgb/chconf.h b/keyboards/dztech/dz60rgb/chconf.h
new file mode 100644
index 0000000000..1d9f12ff1f
--- /dev/null
+++ b/keyboards/dztech/dz60rgb/chconf.h
@@ -0,0 +1,520 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        TRUE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/dztech/dz60rgb/config.h b/keyboards/dztech/dz60rgb/config.h
new file mode 100644
index 0000000000..167b67a87d
--- /dev/null
+++ b/keyboards/dztech/dz60rgb/config.h
@@ -0,0 +1,36 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1219
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    DOU
+#define PRODUCT         DZ60RGB
+#define DESCRIPTION     DZ60 ARM RGB keyboard
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 }
+#define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 }
+
+/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/
+
+#define DIODE_DIRECTION COL2ROW
+
+#define DEBOUNCE 3
+
+#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+#define RGB_MATRIX_SKIP_FRAMES 0
+#define RGB_MATRIX_KEYPRESSES
+#define DISABLE_RGB_MATRIX_SPLASH
+#define DISABLE_RGB_MATRIX_MULTISPLASH
+#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#define DRIVER_ADDR_1 0b1010000
+#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
+
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 63
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
diff --git a/keyboards/dztech/dz60rgb/dz60rgb.c b/keyboards/dztech/dz60rgb/dz60rgb.c
new file mode 100644
index 0000000000..4a4893b8e4
--- /dev/null
+++ b/keyboards/dztech/dz60rgb/dz60rgb.c
@@ -0,0 +1,172 @@
+#include "dz60rgb.h"
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ *   driver
+ *   |  R location
+ *   |  |       G location
+ *   |  |       |       B location
+ *   |  |       |       | */
+    {0, K_14,   J_14,   L_14},
+    {0, K_13,   J_13,   L_13},
+    {0, K_12,   J_12,   L_12},
+    {0, K_11,   J_11,   L_11},
+    {0, K_10,   J_10,   L_10},
+    {0, K_9,    J_9,    L_9},
+    {0, K_8,    J_8,    L_8},
+    {0, K_7,    J_7,    L_7},
+    {0, K_6,    J_6,    L_6},
+    {0, K_5,    J_5,    L_5},
+    {0, K_4,    J_4,    L_4},
+    {0, K_3,    J_3,    L_3},
+    {0, K_2,    J_2,    L_2},
+    {0, K_1,    J_1,    L_1},
+
+    {0, H_14,   G_14,   I_14},
+    {0, H_13,   G_13,   I_13},
+    {0, H_12,   G_12,   I_12},
+    {0, H_11,   G_11,   I_11},
+    {0, H_10,   G_10,   I_10},
+    {0, H_9,    G_9,    I_9},
+    {0, H_8,    G_8,    I_8},
+    {0, H_7,    G_7,    I_7},
+    {0, H_6,    G_6,    I_6},
+    {0, H_5,    G_5,    I_5},
+    {0, H_4,    G_4,    I_4},
+    {0, H_3,    G_3,    I_3},
+    {0, H_2,    G_2,    I_2},
+    {0, H_1,    G_1,    I_1},
+
+    {0, E_14,   D_14,   F_14},
+    {0, E_12,   D_12,   F_12},
+    {0, E_11,   D_11,   F_11},
+    {0, E_10,   D_10,   F_10},
+    {0, E_9,    D_9,    F_9},
+    {0, E_8,    D_8,    F_8},
+    {0, E_7,    D_7,    F_7},
+    {0, E_6,    D_6,    F_6},
+    {0, E_5,    D_5,    F_5},
+    {0, E_4,    D_4,    F_4},
+    {0, E_3,    D_3,    F_3},
+    {0, E_2,    D_2,    F_2},
+    {0, E_1,    D_1,    F_1},
+
+    {0, B_14,   A_14,   C_14},
+    {0, B_13,   A_13,   C_13},
+    {0, B_11,   A_11,   C_11},
+    {0, B_10,   A_10,   C_10},
+    {0, B_9,    A_9,    C_9},
+    {0, B_8,    A_8,    C_8},
+    {0, B_7,    A_7,    C_7},
+    {0, B_6,    A_6,    C_6},
+    {0, B_5,    A_5,    C_5},
+    {0, B_4,    A_4,    C_4},
+    {0, B_3,    A_3,    C_3},
+    {0, B_2,    A_2,    C_2},
+    {0, B_1,    A_1,    C_1},
+
+    {0, B_15,   A_15,   C_15},
+    {0, E_13,   D_13,   F_13},
+    {0, B_12,   A_12,   C_12},
+    {0, E_15,   D_15,   F_15},
+    {0, H_15,   G_15,   I_15},
+    {0, B_16,   A_16,   C_16},
+    {0, E_16,   D_16,   F_16},
+    {0, H_16,   G_16,   I_16},
+    {0, K_16,   J_16,   L_16},
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+    {{0|(13<<4)},   {17.23*13,  0}, 1},
+    {{0|(12<<4)},   {17.23*12,  0}, 1},
+    {{0|(11<<4)},   {17.23*11,  0}, 1},
+    {{0|(10<<4)},   {17.23*10,  0}, 1},
+    {{0|(9<<4)},    {17.23*9,  0}, 1},
+    {{0|(8<<4)},    {17.23*8,  0}, 1},
+    {{0|(7<<4)},    {17.23*7,  0}, 1},
+	{{0|(6<<4)},    { 17.23*6,  0}, 1},
+    {{0|(5<<4)},    { 17.23*5,  0}, 1},
+    {{0|(4<<4)},    { 17.23*4,  0}, 1},
+    {{0|(3<<4)},    { 17.23*3,  0}, 1},
+    {{0|(2<<4)},    { 17.23*2,  0}, 1},
+    {{0|(1<<4)},    { 17.23*1,  0}, 1},
+    {{0|(0<<4)},    { 17.23*0,  0}, 1},
+
+	{{1|(13<<4)},   {17.23*13,  16}, 1},
+    {{1|(12<<4)},   {17.23*12,  16}, 0},
+    {{1|(11<<4)},   {17.23*11,  16}, 0},
+    {{1|(10<<4)},   {17.23*10,  16}, 0},
+    {{1|(9<<4)},    {17.23*9,  16}, 0},
+    {{1|(8<<4)},    {17.23*8,  16}, 0},
+    {{1|(7<<4)},    {17.23*7,  16}, 0},
+	{{1|(6<<4)},    { 17.23*6,  16}, 0},
+    {{1|(5<<4)},    { 17.23*5,  16}, 0},
+    {{1|(4<<4)},    { 17.23*4,  16}, 0},
+    {{1|(3<<4)},    { 17.23*3,  16}, 0},
+    {{1|(2<<4)},    { 17.23*2,  16}, 0},
+    {{1|(1<<4)},    { 17.23*1,  16}, 0},
+    {{1|(0<<4)},    { 17.23*0,  16}, 1},
+
+	{{2|(13<<4)},   {17.23*13,  32}, 1},
+    {{2|(11<<4)},   {17.23*11,  32}, 0},
+    {{2|(10<<4)},   {17.23*10,  32}, 0},
+    {{2|(9<<4)},    {17.23*9,  32}, 0},
+    {{2|(8<<4)},    {17.23*8,  32}, 0},
+    {{2|(7<<4)},    {17.23*7,  32}, 0},
+	{{2|(6<<4)},    { 17.23*6,  32}, 0},
+    {{2|(5<<4)},    { 17.23*5,  32}, 0},
+    {{2|(4<<4)},    { 17.23*4,  32}, 0},
+    {{2|(3<<4)},    { 17.23*3,  32}, 0},
+    {{2|(2<<4)},    { 17.23*2,  32}, 0},
+    {{2|(1<<4)},    { 17.23*1,  32}, 0},
+    {{2|(0<<4)},    { 17.23*0,  32}, 1},
+
+	{{3|(13<<4)},   {17.23*13,  48}, 1},
+    {{3|(11<<4)},   {17.23*11,  48}, 0},
+    {{3|(10<<4)},   {17.23*10,  48}, 0},
+    {{3|(9<<4)},    {17.23*9,  48}, 0},
+    {{3|(8<<4)},    {17.23*8,  48}, 0},
+    {{3|(7<<4)},    {17.23*7,  48}, 0},
+	{{3|(6<<4)},    { 17.23*6,  48}, 0},
+    {{3|(5<<4)},    { 17.23*5,  48}, 0},
+    {{3|(4<<4)},    { 17.23*4,  48}, 0},
+    {{3|(3<<4)},    { 17.23*3,  48}, 0},
+    {{3|(2<<4)},    { 17.23*2,  48}, 0},
+    {{3|(1<<4)},    { 17.23*1,  48}, 0},
+    {{3|(0<<4)},    { 17.23*0,  48}, 1},
+
+	{{4|(13<<4)},   {17.23*13,  64}, 1},
+    {{4|(11<<4)},   {17.23*11,  64}, 1},
+    {{4|(10<<4)},   {17.23*10,  64}, 1},
+    {{4|(9<<4)},    {17.23*9,  64}, 1},
+    {{4|(8<<4)},    {17.23*8,  64}, 1},
+    {{4|(5<<4)},    { 17.23*5,  64}, 0},
+    {{4|(2<<4)},    { 17.23*2,  64}, 1},
+    {{4|(1<<4)},    { 17.23*1,  64}, 1},
+    {{4|(0<<4)},    { 17.23*0,  64}, 1},
+
+};
+
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    return process_record_user(keycode, record);
+}
+
+
+void suspend_power_down_kb(void)
+{
+    rgb_matrix_set_suspend_state(true);
+}
+
+void suspend_wakeup_init_kb(void)
+{
+    rgb_matrix_set_suspend_state(false);
+}
diff --git a/keyboards/dztech/dz60rgb/dz60rgb.h b/keyboards/dztech/dz60rgb/dz60rgb.h
new file mode 100644
index 0000000000..a029933f1f
--- /dev/null
+++ b/keyboards/dztech/dz60rgb/dz60rgb.h
@@ -0,0 +1,16 @@
+#pragma once
+#define XXX KC_NO
+#include "quantum.h"
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
+    K40, K41, K42,           K45,           K48, K49, K4A, K4B,      K4D  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
+    { K40, K41, K42, XXX, XXX, K45, XXX, XXX, K48, K49, K4A, K4B, XXX, K4D }  \
+}
diff --git a/keyboards/dztech/dz60rgb/halconf.h b/keyboards/dztech/dz60rgb/halconf.h
new file mode 100644
index 0000000000..eda293c49b
--- /dev/null
+++ b/keyboards/dztech/dz60rgb/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI                FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUT