[Keyboard] Corne - Remove legacy revision support (#12226)

18 files changed, 1 insertions, 2188 deletions

diff --git a/keyboards/crkbd/rev1/legacy/config.h b/keyboards/crkbd/rev1/legacy/config.h
deleted file mode 100644
index e95f49125a..0000000000
--- a/keyboards/crkbd/rev1/legacy/config.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "serial_config.h"
-
diff --git a/keyboards/crkbd/rev1/legacy/i2c.c b/keyboards/crkbd/rev1/legacy/i2c.c
deleted file mode 100644
index 7b45c3f866..0000000000
--- a/keyboards/crkbd/rev1/legacy/i2c.c
+++ /dev/null
@@ -1,162 +0,0 @@
-#include <util/twi.h>
-#include <avr/io.h>
-#include <stdlib.h>
-#include <avr/interrupt.h>
-#include <util/twi.h>
-#include <stdbool.h>
-#include "i2c.h"
-
-#if defined(USE_I2C) || defined(USE_MATRIX_I2C)
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-
-  // easier way, but will wait slightly longer
-  // _delay_us(100);
-}
-
-// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK)
-void i2c_master_init(void) {
-  // no prescaler
-  TWSR = 0;
-  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
-  // Check datasheets for more info.
-  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-//          1 => error
-uint8_t i2c_master_start(uint8_t address) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
-
-  i2c_delay();
-
-  // check that we started successfully
-  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
-    return 1;
-
-  TWDR = address;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
-    return 1; // slave did not acknowledge
-  else
-    return 0; // success
-}
-
-
-// Finish the i2c transaction.
-void i2c_master_stop(void) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-}
-
-// Write one byte to the i2c slave.
-// returns 0 => slave ACK
-//         1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
-  TWDR = data;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  // check if the slave acknowledged us
-  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
-}
-
-// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
-// if ack=0 the acknowledge bit is not set.
-// returns: byte read from i2c device
-uint8_t i2c_master_read(int ack) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
-
-  i2c_delay();
-  return TWDR;
-}
-
-void i2c_reset_state(void) {
-  TWCR = 0;
-}
-
-void i2c_slave_init(uint8_t address) {
-  TWAR = address << 0; // slave i2c address
-  // TWEN  - twi enable
-  // TWEA  - enable address acknowledgement
-  // TWINT - twi interrupt flag
-  // TWIE  - enable the twi interrupt
-  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
-}
-
-ISR(TWI_vect);
-
-ISR(TWI_vect) {
-  uint8_t ack = 1;
-  switch(TW_STATUS) {
-    case TW_SR_SLA_ACK:
-      // this device has been addressed as a slave receiver
-      slave_has_register_set = false;
-      break;
-
-    case TW_SR_DATA_ACK:
-      // this device has received data as a slave receiver
-      // The first byte that we receive in this transaction sets the location
-      // of the read/write location of the slaves memory that it exposes over
-      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
-      // slave_buffer_pos after each write.
-      if(!slave_has_register_set) {
-        slave_buffer_pos = TWDR;
-        // don't acknowledge the master if this memory loctaion is out of bounds
-        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
-          ack = 0;
-          slave_buffer_pos = 0;
-        }
-        slave_has_register_set = true;
-      } else {
-        i2c_slave_buffer[slave_buffer_pos] = TWDR;
-        BUFFER_POS_INC();
-      }
-      break;
-
-    case TW_ST_SLA_ACK:
-    case TW_ST_DATA_ACK:
-      // master has addressed this device as a slave transmitter and is
-      // requesting data.
-      TWDR = i2c_slave_buffer[slave_buffer_pos];
-      BUFFER_POS_INC();
-      break;
-
-    case TW_BUS_ERROR: // something went wrong, reset twi state
-      TWCR = 0;
-    default:
-      break;
-  }
-  // Reset everything, so we are ready for the next TWI interrupt
-  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
-}
-#endif
diff --git a/keyboards/crkbd/rev1/legacy/i2c.h b/keyboards/crkbd/rev1/legacy/i2c.h
deleted file mode 100644
index 710662c7ab..0000000000
--- a/keyboards/crkbd/rev1/legacy/i2c.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#pragma once
-
-#include <stdint.h>
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency 400kHz
-#define SCL_CLOCK  400000L
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
diff --git a/keyboards/crkbd/rev1/legacy/legacy.c b/keyboards/crkbd/rev1/legacy/legacy.c
deleted file mode 100644
index 595ff1eaf7..0000000000
--- a/keyboards/crkbd/rev1/legacy/legacy.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
-Copyright 2019 @foostan
-Copyright 2020 Drashna Jaelre <@drashna>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "legacy.h"
diff --git a/keyboards/crkbd/rev1/legacy/legacy.h b/keyboards/crkbd/rev1/legacy/legacy.h
deleted file mode 100644
index 08dfcefbc1..0000000000
--- a/keyboards/crkbd/rev1/legacy/legacy.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
-Copyright 2019 @foostan
-Copyright 2020 Drashna Jaelre <@drashna>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "rev1.h"
-
-extern uint8_t is_master;
\ No newline at end of file
diff --git a/keyboards/crkbd/rev1/legacy/matrix.c b/keyboards/crkbd/rev1/legacy/matrix.c
deleted file mode 100644
index 371b1913e1..0000000000
--- a/keyboards/crkbd/rev1/legacy/matrix.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <string.h>
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "quantum.h"
-
-#ifdef USE_MATRIX_I2C
-#  include "i2c.h"
-#else // USE_SERIAL
-#  include "split_scomm.h"
-#endif
-
-#ifndef DEBOUNCE
-#  define DEBOUNCE	5
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-static uint8_t debouncing = DEBOUNCE;
-static const int ROWS_PER_HAND = MATRIX_ROWS/2;
-static uint8_t error_count = 0;
-uint8_t is_master = 0 ;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-static uint8_t matrix_master_scan(void);
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-    matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void tx_rx_leds_init(void)
-{
-#ifndef NO_DEBUG_LEDS
-    setPinOutput(B0);
-    setPinOutput(D5);
-    writePinHigh(B0);
-    writePinHigh(D5);
-#endif
-}
-
-void tx_led_on(void)
-{
-#ifndef NO_DEBUG_LEDS
-    writePinLow(D5);
-#endif
-}
-
-void tx_led_off(void)
-{
-#ifndef NO_DEBUG_LEDS
-    writePinHigh(D5);
-#endif
-}
-
-void rx_led_on(void)
-{
-#ifndef NO_DEBUG_LEDS
-    writePinLow(B0);
-#endif
-}
-
-void rx_led_off(void)
-{
-#ifndef NO_DEBUG_LEDS
-    writePinHigh(B0);
-#endif
-}
-
-
-void matrix_init(void)
-{
-    split_keyboard_setup();
-
-    // initialize row and col
-    unselect_rows();
-    init_cols();
-
-    tx_rx_leds_init();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-
-    is_master = has_usb();
-
-    matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void)
-{
-    bool changed = false;
-    // Right hand is stored after the left in the matirx so, we need to offset it
-    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-
-    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-        select_row(i);
-        _delay_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i+offset] != cols) {
-            changed = true;
-            matrix_debouncing[i+offset] = cols;
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
-            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-                matrix[i+offset] = matrix_debouncing[i+offset];
-            }
-        }
-    }
-
-    return changed;
-}
-
-#ifdef USE_MATRIX_I2C
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
-    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-    if (err) goto i2c_error;
-
-    // start of matrix stored at 0x00
-    err = i2c_master_write(0x00);
-    if (err) goto i2c_error;
-
-    // Start read
-    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
-    if (err) goto i2c_error;
-
-    if (!err) {
-        int i;
-        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
-            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
-        }
-        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
-        i2c_master_stop();
-    } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
-        i2c_reset_state();
-        return err;
-    }
-
-    return 0;
-}
-
-#else // USE_SERIAL
-
-int serial_transaction(int master_changed) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-    int ret=serial_update_buffers(master_changed);
-#else
-    int ret=serial_update_buffers();
-#endif
-    if (ret ) {
-        if(ret==2) rx_led_on();
-        return 1;
-    }
-    rx_led_off();
-    memcpy(&matrix[slaveOffset],
-        (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH);
-    return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
-    bool changed = false;
-    if (is_master) {
-        changed |= matrix_master_scan();
-    }else{
-        changed |= matrix_slave_scan();
-        int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
-        memcpy(&matrix[offset],
-               (void *)serial_master_buffer, SERIAL_MASTER_BUFFER_LENGTH);
-        matrix_scan_quantum();
-    }
-    return (uint8_t) changed;
-}
-
-
-uint8_t matrix_master_scan(void) {
-
-    int ret = _matrix_scan();
-    int mchanged = 1;
-
-    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
-//    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        /* i2c_slave_buffer[i] = matrix[offset+i]; */
-//        i2c_slave_buffer[i] = matrix[offset+i];
-//    }
-#else // USE_SERIAL
-  #ifdef SERIAL_USE_MULTI_TRANSACTION
-    mchanged = memcmp((void *)serial_master_buffer,
-		      &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH);
-  #endif
-    memcpy((void *)serial_master_buffer,
-	   &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH);
-#endif
-
-#ifdef USE_MATRIX_I2C
-    if( i2c_transaction() ) {
-#else // USE_SERIAL
-    if( serial_transaction(mchanged) ) {
-#endif
-        // turn on the indicator led when halves are disconnected
-        tx_led_on();
-
-        error_count++;
-
-        if (error_count > ERROR_DISCONNECT_COUNT) {
-            // reset other half if disconnected
-            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-            for (int i = 0; i < ROWS_PER_HAND; ++i) {
-                matrix[slaveOffset+i] = 0;
-            }
-        }
-    } else {
-        // turn off the indicator led on no error
-        tx_led_off();
-        error_count = 0;
-    }
-    matrix_scan_quantum();
-    return ret;
-}
-
-uint8_t matrix_slave_scan(void) {
-    int ret = _matrix_scan();
-
-    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        /* i2c_slave_buffer[i] = matrix[offset+i]; */
-        i2c_slave_buffer[i] = matrix[offset+i];
-    }
-#else // USE_SERIAL
-  #ifdef SERIAL_USE_MULTI_TRANSACTION
-    int change = 0;
-  #endif
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-  #ifdef SERIAL_USE_MULTI_TRANSACTION
-        if( serial_slave_buffer[i] != matrix[offset+i] )
-        change = 1;
-  #endif
-        serial_slave_buffer[i] = matrix[offset+i];
-    }
-  #ifdef SERIAL_USE_MULTI_TRANSACTION
-    slave_buffer_change_count += change;
-  #endif
-#endif
-    return ret;
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        print_hex8(row); print(": ");
-        print_bin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop16(matrix[i]);
-    }
-    return count;
-}
-
-static void  init_cols(void)
-{
-    for(int x = 0; x < MATRIX_COLS; x++) {
-        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
-        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
-    }
-}
-
-static matrix_row_t read_cols(void)
-{
-    matrix_row_t result = 0;
-    for(int x = 0; x < MATRIX_COLS; x++) {
-        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
-    }
-    return result;
-}
-
-static void unselect_rows(void)
-{
-    for(int x = 0; x < ROWS_PER_HAND; x++) {
-        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
-        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
-    }
-}
-
-static void select_row(uint8_t row)
-{
-    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
-    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
-}
diff --git a/keyboards/crkbd/rev1/legacy/post_config.h b/keyboards/crkbd/rev1/legacy/post_config.h
deleted file mode 100644
index b3d6346cc8..0000000000
--- a/keyboards/crkbd/rev1/legacy/post_config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
-Copyright 2019 @foostan
-Copyright 2020 Drashna Jaelre <@drashna>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#ifdef SSD1306OLED
-#    define USE_I2C
-#endif
-
-#if defined(OLED_DRIVER_ENABLE) && (defined(USE_I2C) || defined(USE_MATRIX_I2C))
-#    error Cannot use both legacy i2c driver and new i2c_master driver at the same time. Undefine USE_I2C and/or USE_MATRIX_I2C
-#endif
diff --git a/keyboards/crkbd/rev1/legacy/rules.mk b/keyboards/crkbd/rev1/legacy/rules.mk
index 94c5fe0242..836587e45e 100644
--- a/keyboards/crkbd/rev1/legacy/rules.mk
+++ b/keyboards/crkbd/rev1/legacy/rules.mk
@@ -1,10 +1 @@
-CUSTOM_MATRIX = yes
-
-SRC += 	matrix.c \
-		split_util.c \
-		split_scomm.c
-
-QUANTUM_LIB_SRC += i2c.c serial.c
-
-# Disable unsupported hardware
-BACKLIGHT_SUPPORTED = no
+DEFAULT_FOLDER = crkbd/rev1
diff --git a/keyboards/crkbd/rev1/legacy/serial.c b/keyboards/crkbd/rev1/legacy/serial.c
deleted file mode 100644
index f6293c3dc2..0000000000
--- a/keyboards/crkbd/rev1/legacy/serial.c
+++ /dev/null
@@ -1,589 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- *
- * 2018-10-28 checked
- *  avr-gcc 4.9.2
- *  avr-gcc 5.4.0
- *  avr-gcc 7.3.0
- */
-
-#ifndef F_CPU
-#define F_CPU 16000000
-#endif
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <stddef.h>
-#include <stdbool.h>
-#include "serial.h"
-
-#ifdef SOFT_SERIAL_PIN
-
-#ifdef __AVR_ATmega32U4__
-  // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
-  #ifdef USE_I2C
-    #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
-      #error Using ATmega32U4 I2C, so can not use PD0, PD1
-    #endif
-  #endif
-
-  #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
-    #define SERIAL_PIN_DDR   DDRD
-    #define SERIAL_PIN_PORT  PORTD
-    #define SERIAL_PIN_INPUT PIND
-    #if SOFT_SERIAL_PIN == D0
-      #define SERIAL_PIN_MASK _BV(PD0)
-      #define EIMSK_BIT       _BV(INT0)
-      #define EICRx_BIT       (~(_BV(ISC00) | _BV(ISC01)))
-      #define SERIAL_PIN_INTERRUPT INT0_vect
-    #elif  SOFT_SERIAL_PIN == D1
-      #define SERIAL_PIN_MASK _BV(PD1)
-      #define EIMSK_BIT       _BV(INT1)
-      #define EICRx_BIT       (~(_BV(ISC10) | _BV(ISC11)))
-      #define SERIAL_PIN_INTERRUPT INT1_vect
-    #elif  SOFT_SERIAL_PIN == D2
-      #define SERIAL_PIN_MASK _BV(PD2)
-      #define EIMSK_BIT       _BV(INT2)
-      #define EICRx_BIT       (~(_BV(ISC20) | _BV(ISC21)))
-      #define SERIAL_PIN_INTERRUPT INT2_vect
-    #elif  SOFT_SERIAL_PIN == D3
-      #define SERIAL_PIN_MASK _BV(PD3)
-      #define EIMSK_BIT       _BV(INT3)
-      #define EICRx_BIT       (~(_BV(ISC30) | _BV(ISC31)))
-      #define SERIAL_PIN_INTERRUPT INT3_vect
-    #endif
-  #elif  SOFT_SERIAL_PIN == E6
-    #define SERIAL_PIN_DDR   DDRE
-    #define SERIAL_PIN_PORT  PORTE
-    #define SERIAL_PIN_INPUT PINE
-    #define SERIAL_PIN_MASK  _BV(PE6)
-    #define EIMSK_BIT        _BV(INT6)
-    #define EICRx_BIT        (~(_BV(ISC60) | _BV(ISC61)))
-    #define SERIAL_PIN_INTERRUPT INT6_vect
-  #else
-  #error invalid SOFT_SERIAL_PIN value
-  #endif
-
-#else
- #error serial.c now support ATmega32U4 only
-#endif
-
-//////////////// for backward compatibility ////////////////////////////////
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
-  #if SERIAL_SLAVE_BUFFER_LENGTH > 0
-  uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-  #endif
-  #if SERIAL_MASTER_BUFFER_LENGTH > 0
-  uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-  #endif
-  uint8_t volatile status0 = 0;
-
-SSTD_t transactions[] = {
-    { (uint8_t *)&status0,
-  #if SERIAL_MASTER_BUFFER_LENGTH > 0
-      sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
-  #else
-      0, (uint8_t *)NULL,
-  #endif
-  #if SERIAL_SLAVE_BUFFER_LENGTH > 0
-      sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
-  #else
-      0, (uint8_t *)NULL,
-  #endif
-  }
-};
-
-void serial_master_init(void)
-{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
-
-void serial_slave_init(void)
-{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
-
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers()
-{
-    int result;
-    result = soft_serial_transaction();
-    return result;
-}
-
-#endif // end of Simple API (OLD API, compatible with let's split serial.c)
-////////////////////////////////////////////////////////////////////////////
-
-#define ALWAYS_INLINE __attribute__((always_inline))
-#define NO_INLINE __attribute__((noinline))
-#define _delay_sub_us(x)    __builtin_avr_delay_cycles(x)
-
-// parity check
-#define ODD_PARITY 1
-#define EVEN_PARITY 0
-#define PARITY EVEN_PARITY
-
-#ifdef SERIAL_DELAY
-  // custom setup in config.h
-  // #define TID_SEND_ADJUST 2
-  // #define SERIAL_DELAY 6             // micro sec
-  // #define READ_WRITE_START_ADJUST 30 // cycles
-  // #define READ_WRITE_WIDTH_ADJUST 8 // cycles
-#else
-// ============ Standard setups ============
-
-#ifndef SELECT_SOFT_SERIAL_SPEED
-#define SELECT_SOFT_SERIAL_SPEED 1
-//  0: about 189kbps
-//  1: about 137kbps (default)
-//  2: about 75kbps
-//  3: about 39kbps
-//  4: about 26kbps
-//  5: about 20kbps
-#endif
-
-#if __GNUC__ < 6
-  #define TID_SEND_ADJUST 14
-#else
-  #define TID_SEND_ADJUST 2
-#endif
-
-#if SELECT_SOFT_SERIAL_SPEED == 0
-  // Very High speed
-  #define SERIAL_DELAY 4             // micro sec
-  #if __GNUC__ < 6
-    #define READ_WRITE_START_ADJUST 33 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_START_ADJUST 34 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 1
-  // High speed
-  #define SERIAL_DELAY 6             // micro sec
-  #if __GNUC__ < 6
-    #define READ_WRITE_START_ADJUST 30 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_START_ADJUST 33 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 2
-  // Middle speed
-  #define SERIAL_DELAY 12            // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 3
-  // Low speed
-  #define SERIAL_DELAY 24            // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 4
-  // Very Low speed
-  #define SERIAL_DELAY 36            // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 5
-  // Ultra Low speed
-  #define SERIAL_DELAY 48            // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#else
-#error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif /* SELECT_SOFT_SERIAL_SPEED */
-#endif /* SERIAL_DELAY */
-
-#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
-#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
-
-#define SLAVE_INT_WIDTH_US 1
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-  #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
-#else
-  #define SLAVE_INT_ACK_WIDTH_UNIT 2
-  #define SLAVE_INT_ACK_WIDTH 4
-#endif
-
-static SSTD_t *Transaction_table = NULL;
-static uint8_t Transaction_table_size = 0;
-
-inline static void serial_delay(void) ALWAYS_INLINE;
-inline static
-void serial_delay(void) {
-  _delay_us(SERIAL_DELAY);
-}
-
-inline static void serial_delay_half1(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half1(void) {
-  _delay_us(SERIAL_DELAY_HALF1);
-}
-
-inline static void serial_delay_half2(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half2(void) {
-  _delay_us(SERIAL_DELAY_HALF2);
-}
-
-inline static void serial_output(void) ALWAYS_INLINE;
-inline static
-void serial_output(void) {
-  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
-}
-
-// make the serial pin an input with pull-up resistor
-inline static void serial_input_with_p