Remove duplicate test keyboards (#6539)

* Remove test keyboards now onekey and splittest have been extended

* Add f072 for testing

50 files changed, 0 insertions, 5538 deletions

diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
deleted file mode 100644
index 2809c9d184..0000000000
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
-  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
-  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
-  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
-  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
-  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
-  stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}
diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h
deleted file mode 100644
index b31d74307b..0000000000
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for a Generic STM32F103 board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_GENERIC_STM32_F103
-#define BOARD_NAME              "Generic STM32F103x board"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK            32768
-#define STM32_HSECLK            8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F103xB
-
-/*
- * IO pins assignments
- */
-
-/* on-board */
-
-#define GPIOC_LED               13
-#define GPIOD_OSC_IN            0
-#define GPIOD_OSC_OUT           1
-
-/* In case your board has a "USB enable" hardware
-   controlled by a pin, define it here. (It could be just
-   a 1.5k resistor connected to D+ line.)
-*/
-/*
-#define GPIOB_USB_DISC          10
-*/
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- *   0 - Analog input.
- *   1 - Push Pull output 10MHz.
- *   2 - Push Pull output 2MHz.
- *   3 - Push Pull output 50MHz.
- *   4 - Digital input.
- *   5 - Open Drain output 10MHz.
- *   6 - Open Drain output 2MHz.
- *   7 - Open Drain output 50MHz.
- *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
- *   9 - Alternate Push Pull output 10MHz.
- *   A - Alternate Push Pull output 2MHz.
- *   B - Alternate Push Pull output 50MHz.
- *   C - Reserved.
- *   D - Alternate Open Drain output 10MHz.
- *   E - Alternate Open Drain output 2MHz.
- *   F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA2  - Alternate output  (USART2 TX).
- * PA3  - Normal input      (USART2 RX).
- * PA9  - Alternate output  (USART1 TX).
- * PA10 - Normal input      (USART1 RX).
- */
-#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
-#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
-#define VAL_GPIOAODR            0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- * PB10    - Push Pull output  (USB switch).
- */
-#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
-#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
-#define VAL_GPIOBODR            0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC13    - Push Pull output  (LED).
- */
-#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
-#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
-#define VAL_GPIOCODR            0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0  - Normal input (XTAL).
- * PD1  - Normal input (XTAL).
- */
-#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
-#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
-#define VAL_GPIODODR            0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
-#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
-#define VAL_GPIOEODR            0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-/* The point is that most of the generic STM32F103* boards
-   have a 1.5k resistor connected on one end to the D+ line
-   and on the other end to some pin. Or even a slightly more
-   complicated "USB enable" circuit, controlled by a pin.
-   That should go here.
-
-   However on some boards (e.g. one that I have), there's no
-   such hardware. In which case it's better to not do anything.
-*/
-/*
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
-*/
-#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-/*
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
-*/
-#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk
deleted file mode 100644
index 6b8b312fd9..0000000000
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103
diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png b/keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png
deleted file mode 100644
index c44a7d9ebc..0000000000
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png
+++ /dev/null
diff --git a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.c
deleted file mode 100644
index 7e9f90853e..0000000000
--- a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
-#endif
-};
-#endif
-
-void enter_bootloader_mode_if_requested(void);
-
-/**
- * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
- */
-void __early_init(void) {
-  enter_bootloader_mode_if_requested();
-  stm32_clock_init();
-}
-
-
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-}
diff --git a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.h
deleted file mode 100644
index 173f7b6054..0000000000
--- a/keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.h
+++ /dev/null
@@ -1,923 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#ifndef BOARD_H
-#define BOARD_H
-
-/*
- * Setup for ST STM32F072B-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32F072B_DISCOVERY
-#define BOARD_NAME                  "ST STM32F072B-Discovery"
-
-/*
- * Board oscillators-related settings.
- * NOTE: LSE not fitted.
- * NOTE: HSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK                0U
-#endif
-
-#define STM32_LSEDRV                (3U << 3U)
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK                0U
-#endif
-
-#define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F072xB
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON                0U
-#define GPIOA_PIN1                  1U
-#define GPIOA_PIN2                  2U
-#define GPIOA_PIN3                  3U
-#define GPIOA_PIN4                  4U
-#define GPIOA_PIN5                  5U
-#define GPIOA_PIN6                  6U
-#define GPIOA_PIN7                  7U
-#define GPIOA_PIN8                  8U
-#define GPIOA_PIN9                  9U
-#define GPIOA_PIN10                 10U
-#define GPIOA_USB_DM                11U
-#define GPIOA_USB_DP                12U
-#define GPIOA_SWDIO                 13U
-#define GPIOA_SWCLK                 14U
-#define GPIOA_PIN15                 15U
-
-#define GPIOB_PIN0                  0U
-#define GPIOB_PIN1                  1U
-#define GPIOB_PIN2                  2U
-#define GPIOB_PIN3                  3U
-#define GPIOB_PIN4                  4U
-#define GPIOB_PIN5                  5U
-#define GPIOB_PIN6                  6U
-#define GPIOB_PIN7                  7U
-#define GPIOB_PIN8                  8U
-#define GPIOB_PIN9                  9U
-#define GPIOB_PIN10                 10U
-#define GPIOB_PIN11                 11U
-#define GPIOB_PIN12                 12U
-#define GPIOB_SPI2_SCK              13U
-#define GPIOB_SPI2_MISO             14U
-#define GPIOB_SPI2_MOSI             15U
-
-#define GPIOC_MEMS_CS               0U
-#define GPIOC_PIN1                  1U
-#define GPIOC_PIN2                  2U
-#define GPIOC_PIN3                  3U
-#define GPIOC_PIN4                  4U
-#define GPIOC_PIN5                  5U
-#define GPIOC_LED_RED               6U
-#define GPIOC_LED_BLUE              7U
-#define GPIOC_LED_ORANGE            8U
-#define GPIOC_LED_GREEN             9U
-#define GPIOC_PIN10                 10U
-#define GPIOC_PIN11                 11U
-#define GPIOC_PIN12                 12U
-#define GPIOC_PIN13                 13U
-#define GPIOC_OSC32_IN              14U
-#define GPIOC_OSC32_OUT             15U
-
-#define GPIOD_PIN0                  0U
-#define GPIOD_PIN1                  1U
-#define GPIOD_PIN2                  2U
-#define GPIOD_PIN3                  3U
-#define GPIOD_PIN4                  4U
-#define GPIOD_PIN5                  5U
-#define GPIOD_PIN6                  6U
-#define GPIOD_PIN7                  7U
-#define GPIOD_PIN8                  8U
-#define GPIOD_PIN9                  9U
-#define GPIOD_PIN10                 10U
-#define GPIOD_PIN11                 11U
-#define GPIOD_PIN12                 12U
-#define GPIOD_PIN13                 13U
-#define GPIOD_PIN14                 14U
-#define GPIOD_PIN15                 15U
-
-#define GPIOE_PIN0                  0U
-#define GPIOE_PIN1                  1U
-#define GPIOE_PIN2                  2U
-#define GPIOE_PIN3                  3U
-#define GPIOE_PIN4                  4U
-#define GPIOE_PIN5                  5U
-#define GPIOE_PIN6                  6U
-#define GPIOE_PIN7                  7U
-#define GPIOE_PIN8                  8U
-#define GPIOE_PIN9                  9U
-#define GPIOE_PIN10                 10U
-#define GPIOE_PIN11                 11U
-#define GPIOE_PIN12                 12U
-#define GPIOE_PIN13                 13U
-#define GPIOE_PIN14                 14U
-#define GPIOE_PIN15                 15U
-
-#define GPIOF_OSC_IN                0U
-#define GPIOF_OSC_OUT               1U
-#define GPIOF_PIN2                  2U
-#define GPIOF_PIN3                  3U
-#define GPIOF_PIN4                  4U
-#define GPIOF_PIN5                  5U
-#define GPIOF_PIN6                  6U
-#define GPIOF_PIN7                  7U
-#define GPIOF_PIN8                  8U
-#define GPIOF_PIN9                  9U
-#define GPIOF_PIN10                 10U
-#define GPIOF_PIN11                 11U
-#define GPIOF_PIN12                 12U
-#define GPIOF_PIN13                 13U
-#define GPIOF_PIN14                 14U
-#define GPIOF_PIN15                 15U
-
-/*
- * IO lines assignments.
- */
-#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
-#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
-#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
-
-#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
-#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
-#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
-
-#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
-#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
-#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
-#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
-#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
-#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
-#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
-
-
-
-#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
-#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
-#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
-#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
-#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
-#define PIN_ODR_LOW(n)              (0U << (n))
-#define PIN_ODR_HIGH(n)             (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
-#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
-#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
-#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
-#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
-#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
-#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
-#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
-#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
-
-/*
- * GPIOA setup:
- *
- * PA0  - BUTTON                    (input floating).
- * PA1  - PIN1                      (input pullup).
- * PA2  - PIN2                      (input pullup).
- * PA3  - PIN3                      (input pullup).
- * PA4  - PIN4                      (input pullup).
- * PA5  - PIN5                      (input pullup).
- * PA6  - PIN6                      (input pullup).
- * PA7  - PIN7                      (input pullup).
- * PA8  - PIN8                      (input pullup).
- * PA9  - PIN9                      (input pullup).
- * PA10 - PIN10                     (input pullup).
- * PA11 - USB_DM                    (input floating).
- * PA12 - USB_DP                    (input floating).
- * PA13 - SWDIO                     (alternate 0).
- * PA14 - SWCLK                     (alternate 0).
- * PA15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
-                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
-                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
-                                     PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
-                                     PIN_O