Merge branch 'master' into debounce_refactor

# Conflicts:
#	tmk_core/common/keyboard.c

18 files changed, 1776 insertions, 0 deletions

diff --git a/keyboards/bminiex/backlight.c b/keyboards/bminiex/backlight.c
new file mode 100644
index 0000000000..94e8126d88
--- /dev/null
+++ b/keyboards/bminiex/backlight.c
@@ -0,0 +1,211 @@
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#include "backlight.h"
+#include "quantum.h"
+
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+
+#include "backlight_custom.h"
+#include "breathing_custom.h"
+
+// DEBUG
+#include <stdlib.h>
+#include <stdio.h>
+
+// Port D: digital pins of the AVR chipset
+#define NUMLOCK_PORT    (1 << 0)  // D0
+#define CAPSLOCK_PORT   (1 << 1)  // D1
+#define BACKLIGHT_PORT  (1 << 4)  // D4
+#define SCROLLLOCK_PORT (1 << 6)  // D6
+
+#define TIMER_CLK_DIV64			  0x03	///< Timer clocked at F_CPU/64
+#define TIMER1PRESCALE	TIMER_CLK_DIV64 ///< timer 1 prescaler default
+
+#define TIMER_PRESCALE_MASK		0x07	///< Timer Prescaler Bit-Mask
+
+#define PWM_MAX 0xFF
+#define TIMER_TOP 255 // 8 bit PWM
+
+extern backlight_config_t backlight_config;
+
+/**
+ * References
+ * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
+ * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
+ * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
+ * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
+ * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
+ */
+
+// @Override
+// turn LEDs on and off depending on USB caps/num/scroll lock states.
+__attribute__ ((weak))
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+      // turn on
+      DDRD  |= NUMLOCK_PORT;
+      PORTD |= NUMLOCK_PORT;
+    } else {
+      // turn off
+      DDRD  &= ~NUMLOCK_PORT;
+      PORTD &= ~NUMLOCK_PORT;
+    }
+
+    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+      DDRD  |= CAPSLOCK_PORT;
+      PORTD |= CAPSLOCK_PORT;
+    } else {
+      DDRD  &= ~CAPSLOCK_PORT;
+      PORTD &= ~CAPSLOCK_PORT;
+    }
+
+    if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+      DDRD  |= SCROLLLOCK_PORT;
+      PORTD |= SCROLLLOCK_PORT;
+    } else {
+      DDRD  &= ~SCROLLLOCK_PORT;
+      PORTD &= ~SCROLLLOCK_PORT;
+    }
+}
+
+#ifdef BACKLIGHT_ENABLE
+
+// sets up Timer 1 for 8-bit PWM
+void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
+  // default 8 bit mode
+  TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
+  TCCR1A |= (1 << 0);  // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
+
+  // clear output compare value A
+  // outb(OCR1AH, 0);
+  // outb(OCR1AL, 0);
+
+  // clear output comparator registers for B
+	OCR1BH = 0; // outb(OCR1BH, 0);
+	OCR1BL = 0; // outb(OCR1BL, 0);
+}
+
+bool is_init = false;
+void timer1Init(void) {
+  // timer1SetPrescaler(TIMER1PRESCALE)
+  // set to DIV/64
+  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
+
+  // reset TCNT1
+  TCNT1H = 0;  // outb(TCNT1H, 0);
+	TCNT1L = 0;  // outb(TCNT1L, 0);
+
+  // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
+	TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
+
+  is_init = true;
+}
+
+void timer1UnInit(void) {
+  // set prescaler back to NONE
+  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00;  // TIMERRTC_CLK_STOP
+
+  // disable timer overflow interrupt
+  TIMSK &= ~_BV(TOIE1); // overflow bit?
+
+  setPWM(0);
+
+  is_init = false;
+}
+
+
+// handle TCNT1 overflow
+//! Interrupt handler for tcnt1 overflow interrupt
+ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
+{
+	// sei();
+  // handle breathing here
+  #ifdef BACKLIGHT_BREATHING
+  if (is_breathing()) {
+    custom_breathing_handler();
+  }
+  #endif
+}
+
+// enable timer 1 PWM
+// timer1PWMBOn()
+void timer1PWMBEnable(void) {
+  // turn on channel B (OC1B) PWM output
+  // set OC1B as non-inverted PWM
+  TCCR1A |= _BV(COM1B1);
+  TCCR1A &= ~_BV(COM1B0);
+}
+
+// disable timer 1 PWM
+// timer1PWMBOff()
+void timer1PWMBDisable(void) {
+  TCCR1A &= ~_BV(COM1B1);
+  TCCR1A &= ~_BV(COM1B0);
+}
+
+void enableBacklight(void) {
+  DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
+  PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
+}
+
+void disableBacklight(void) {
+  // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
+  PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
+}
+
+void startPWM(void) {
+  timer1Init();
+  timer1PWMBEnable();
+  enableBacklight();
+}
+
+void stopPWM(void) {
+  timer1UnInit();
+  disableBacklight();
+  timer1PWMBDisable();
+}
+
+void b_led_init_ports(void) {
+  /* turn backlight on/off depending on user preference */
+  #if BACKLIGHT_ON_STATE == 0
+    // DDRx register: sets the direction of Port D
+    // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
+    PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
+  #else
+    DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
+    PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
+  #endif
+
+  timer1PWMSetup();
+  startPWM();
+
+  #ifdef BACKLIGHT_BREATHING
+  breathing_enable();
+  #endif
+}
+
+void b_led_set(uint8_t level) {
+  if (level > BACKLIGHT_LEVELS) {
+    level = BACKLIGHT_LEVELS;
+  }
+
+  setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
+}
+
+// called every matrix scan
+void b_led_task(void) {
+  // do nothing for now
+}
+
+void setPWM(uint16_t xValue) {
+  if (xValue > TIMER_TOP) {
+    xValue = TIMER_TOP;
+  }
+  OCR1B = xValue; // timer1PWMBSet(xValue);
+}
+
+#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/bminiex/backlight_custom.h b/keyboards/bminiex/backlight_custom.h
new file mode 100644
index 0000000000..51365fe3ba
--- /dev/null
+++ b/keyboards/bminiex/backlight_custom.h
@@ -0,0 +1,13 @@
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#pragma once
+
+#include <avr/pgmspace.h>
+void b_led_init_ports(void);
+void b_led_set(uint8_t level);
+void b_led_task(void);
+void setPWM(uint16_t xValue);
+
diff --git a/keyboards/bminiex/bminiex.c b/keyboards/bminiex/bminiex.c
new file mode 100644
index 0000000000..d9b05aba51
--- /dev/null
+++ b/keyboards/bminiex/bminiex.c
@@ -0,0 +1,97 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "bminiex.h"
+#include "rgblight.h"
+
+#include <avr/pgmspace.h>
+
+#include "action_layer.h"
+#include "i2c.h"
+#include "quantum.h"
+
+#include "backlight.h"
+#include "backlight_custom.h"
+
+// for keyboard subdirectory level init functions
+// @Override
+void matrix_init_kb(void) {
+  // call user level keymaps, if any
+  matrix_init_user();
+}
+
+#ifdef BACKLIGHT_ENABLE
+/// Overrides functions in `quantum.c`
+void backlight_init_ports(void) {
+  b_led_init_ports();
+}
+
+void backlight_task(void) {
+  b_led_task();
+}
+
+void backlight_set(uint8_t level) {
+  b_led_set(level);
+}
+#endif
+
+#ifdef RGBLIGHT_ENABLE
+extern rgblight_config_t rgblight_config;
+
+// custom RGB driver
+void rgblight_set(void) {
+  if (!rgblight_config.enable) {
+    for (uint8_t i=0; i<RGBLED_NUM; i++) {
+      led[i].r = 0;
+      led[i].g = 0;
+      led[i].b = 0;
+    }
+  }
+
+  i2c_init();
+  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+
+bool rgb_init = false;
+
+void matrix_scan_kb(void) {
+  // if LEDs were previously on before poweroff, turn them back on
+  if (rgb_init == false && rgblight_config.enable) {
+    i2c_init();
+    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+    rgb_init = true;
+  }
+
+  rgblight_task();
+#else
+void matrix_scan_kb(void) {
+#endif
+  matrix_scan_user();
+  /* Nothing else for now. */
+}
+
+__attribute__((weak)) // overridable
+void matrix_init_user(void) {
+
+}
+
+__attribute__((weak)) // overridable
+void matrix_scan_user(void) {
+
+}
+
+
diff --git a/keyboards/bminiex/bminiex.h b/keyboards/bminiex/bminiex.h
new file mode 100644
index 0000000000..8d897f639f
--- /dev/null
+++ b/keyboards/bminiex/bminiex.h
@@ -0,0 +1,94 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+  K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, K65, K75, K85, K95, \
+  K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4,      KD0, K64, K74, K84, K94, \
+  K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3,      K67, K63, K73, K83,      \
+  K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KC2, KD2,      KE0, K62, K72, K82, K92, \
+  K01, K30, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1,      K86, K77, K61, K71, K81,      \
+  K00, K10, K20,           K56,                     K57, KB0, KC0, K66, K76, K96, K60,      K80, K90  \
+){ \
+  { K00, K10,   K20, K30,   KC_NO, KC_NO, K60,   KC_NO, K80,   K90,   KC_NO, KB0, KC0,   KD0,   KE0   }, \
+  { K01, K11,   K21, K31,   K41,   K51,   K61,   K71,   K81,   KC_NO, KA1,   KB1, KC_NO, KD1,   KE1   }, \
+  { K02, K12,   K22, K32,   K42,   K52,   K62,   K72,   K82,   K92,   KA2,   KB2, KC2,   KD2,   KE2   }, \
+  { K03, K13,   K23, K33,   K43,   K53,   K63,   K73,   K83,   KC_NO, KA3,   KB3, KC3,   KD3,   KC_NO }, \
+  { K04, K14,   K24, K34,   K44,   K54,   K64,   K74,   K84,   K94,   KA4,   KB4, KC4,   KC_NO, KE4   }, \
+  { K05, KC_NO, K25, K35,   K45,   K55,   K65,   K75,   K85,   K95,   KC_NO, KB5, KC5,   KD5,   KE5   }, \
+  { K06, K16,   K26, K36,   K46,   K56,   K66,   K76,   K86,   K96,   KA6,   KB6, KC6,   KD6,   KE6   }, \
+  { K07, K17,   K27, K37,   K47,   K57,   K67,   K77,   KC_NO, KC_NO, KA7,   KB7, KC7,   KD7,   KE7   } \
+}
+
+#define LAYOUT_ansi( \
+  K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, K65, K75, K85, K95, \
+  K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4,      KD0, K64, K74, K84, K94, \
+  K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3,      K67, K63, K73, K83,      \
+  K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2,      KD2,      KE0, K62, K72, K82, K92, \
+  K01,      K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1,      K86, K77, K61, K71, K81,      \
+  K00, K10, K20,           K56,                     K57, KB0, KC0, K66, K76, K96, K60,      K80, K90  \
+){ \
+  { K00, K10,   K20, KC_NO, KC_NO, KC_NO, K60,   KC_NO, K80,   K90,   KC_NO, KB0, KC0,   KD0,   KE0   }, \
+  { K01, K11,   K21, K31,   K41,   K51,   K61,   K71,   K81,   KC_NO, KA1,   KB1, KC_NO, KD1,   KE1   }, \
+  { K02, K12,   K22, K32,   K42,   K52,   K62,   K72,   K82,   K92,   KA2,   KB2, KC_NO, KD2,   KE2   }, \
+  { K03, K13,   K23, K33,   K43,   K53,   K63,   K73,   K83,   KC_NO, KA3,   KB3, KC3,   KD3,   KC_NO }, \
+  { K04, K14,   K24, K34,   K44,   K54,   K64,   K74,   K84,   K94,   KA4,   KB4, KC4,   KC_NO, KE4   }, \
+  { K05, KC_NO, K25, K35,   K45,   K55,   K65,   K75,   K85,   K95,   KC_NO, KB5, KC5,   KD5,   KE5   }, \
+  { K06, K16,   K26, K36,   K46,   K56,   K66,   K76,   K86,   K96,   KA6,   KB6, KC6,   KD6,   KE6   }, \
+  { K07, K17,   K27, K37,   K47,   K57,   K67,   K77,   KC_NO, KC_NO, KA7,   KB7, KC7,   KD7,   KE7   } \
+}
+
+#define LAYOUT_iso( \
+  K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, K65, K75, K85, K95, \
+  K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4,      KD0, K64, K74, K84, K94, \
+  K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3,           K67, K63, K73, K83,      \
+  K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KC2, KD2,      KE0, K62, K72, K82, K92, \
+  K01, K30, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1,      K86, K77, K61, K71, K81,      \
+  K00, K10, K20,           K56,                     K57, KB0, KC0, K66, K76, K96, K60,      K80, K90  \
+){ \
+  { K00, K10,   K20, K30,   KC_NO, KC_NO, K60,   KC_NO, K80,   K90,   KC_NO, KB0, KC0,   KD0,   KE0   }, \
+  { K01, K11,   K21, K31,   K41,   K51,   K61,   K71,   K81,   KC_NO, KA1,   KB1, KC_NO, KD1,   KE1   }, \
+  { K02, K12,   K22, K32,   K42,   K52,   K62,   K72,   K82,   K92,   KA2,   KB2, KC2,   KD2,   KE2   }, \
+  { K03, K13,   K23, K33,   K43,   K53,   K63,   K73,   K83,   KC_NO, KA3,   KB3, KC3,   KC_NO, KC_NO }, \
+  { K04, K14,   K24, K34,   K44,   K54,   K64,   K74,   K84,   K94,   KA4,   KB4, KC4,   KC_NO, KE4   }, \
+  { K05, KC_NO, K25, K35,   K45,   K55,   K65,   K75,   K85,   K95,   KC_NO, KB5, KC5,   KD5,   KE5   }, \
+  { K06, K16,   K26, K36,   K46,   K56,   K66,   K76,   K86,   K96,   KA6,   KB6, KC6,   KD6,   KE6   }, \
+  { K07, K17,   K27, K37,   K47,   K57,   K67,   K77,   KC_NO, KC_NO, KA7,   KB7, KC7,   KD7,   KE7   } \
+}
+
+#define LAYOUT_kc( \
+  K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, K65, K75, K85, K95, \
+  K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4,      KD0, K64, K74, K84, K94, \
+  K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3,      K67, K63, K73, K83,      \
+  K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KC2, KD2,      KE0, K62, K72, K82, K92, \
+  K01, K30, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1,      K86, K77, K61, K71, K81,      \
+  K00, K10, K20,           K56,                     K57, KB0, KC0, K66, K76, K96, K60,      K80, K90  \
+) \
+{ \
+    { KC_##K00, KC_##K10, KC_##K20, KC_##K30, KC_NO,    KC_NO,    KC_##K60, KC_NO,    KC_##K80, KC_##K90, KC_NO,    KC_##KB0, KC_##KC0, KC_##KD0, KC_##KE0 }, \
+    { KC_##K01, KC_##K11, KC_##K21, KC_##K31, KC_##K41, KC_##K51, KC_##K61, KC_##K71, KC_##K81, KC_NO,    KC_##KA1, KC_##KB1, KC_NO,    KC_##KD1, KC_##KE1 }, \
+    { KC_##K02, KC_##K12, KC_##K22, KC_##K32, KC_##K42, KC_##K52, KC_##K62, KC_##K72, KC_##K82, KC_##K92, KC_##KA2, KC_##KB2, KC_##KC2, KC_##KD2, KC_##KE2 }, \
+    { KC_##K03, KC_##K13, KC_##K23, KC_##K33, KC_##K43, KC_##K53, KC_##K63, KC_##K73, KC_##K83, KC_NO,    KC_##KA3, KC_##KB3, KC_##KC3, KC_##KD3, KC_NO    }, \
+    { KC_##K04, KC_##K14, KC_##K24, KC_##K34, KC_##K44, KC_##K54, KC_##K64, KC_##K74, KC_##K84, KC_##K94, KC_##KA4, KC_##KB4, KC_##KC4, KC_NO,    KC_##KE4 }, \
+    { KC_##K05, KC_NO,    KC_##K25, KC_##K35, KC_##K45, KC_##K55, KC_##K65, KC_##K75, KC_##K85, KC_##K95, KC_NO,    KC_##KB5, KC_##KC5, KC_##KD5, KC_##KE5 }, \
+    { KC_##K06, KC_##K16, KC_##K26, KC_##K36, KC_##K46, KC_##K56, KC_##K66, KC_##K76, KC_##K86, KC_##K96, KC_##KA6, KC_##KB6, KC_##KC6, KC_##KD6, KC_##KE6 }, \
+    { KC_##K07, KC_##K17, KC_##K27, KC_##K37, KC_##K47, KC_##K57, KC_##K67, KC_##K77, KC_NO,    KC_NO,    KC_##KA7, KC_##KB7, KC_##KC7, KC_##KD7, KC_##KE7 }  \
+}
+
diff --git a/keyboards/bminiex/breathing_custom.h b/keyboards/bminiex/breathing_custom.h
new file mode 100644
index 0000000000..71416b1b45
--- /dev/null
+++ b/keyboards/bminiex/breathing_custom.h
@@ -0,0 +1,140 @@
+/**
+ * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
+ * Works in conjunction with `backlight.c`.
+ *
+ * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
+ * handler in `backlight.c` instead of setting up its own timer.
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#ifdef BACKLIGHT_ENABLE
+#ifdef BACKLIGHT_BREATHING
+
+#include "backlight_custom.h"
+
+#ifndef BREATHING_PERIOD
+#define BREATHING_PERIOD 6
+#endif
+
+#define breathing_min() do {breathing_counter = 0;} while (0)
+#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
+
+// TODO make this share code with quantum.c
+
+#define BREATHING_NO_HALT  0
+#define BREATHING_HALT_OFF 1
+#define BREATHING_HALT_ON  2
+#define BREATHING_STEPS 128
+
+static uint8_t breathing_period = BREATHING_PERIOD;
+static uint8_t breathing_halt = BREATHING_NO_HALT;
+static uint16_t breathing_counter = 0;
+
+static bool breathing = false;
+
+bool is_breathing(void) {
+  return breathing;
+}
+
+// See http://jared.geek.nz/2013/feb/linear-led-pwm
+static uint16_t cie_lightness(uint16_t v) {
+  if (v <= 5243) // if below 8% of max
+    return v / 9; // same as dividing by 900%
+  else {
+    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
+    // to get a useful result with integer division, we shift left in the expression above
+    // and revert what we've done again after squaring.
+    y = y * y * y >> 8;
+    if (y > 0xFFFFUL) // prevent overflow
+      return 0xFFFFU;
+    else
+      return (uint16_t) y;
+  }
+}
+
+void breathing_enable(void) {
+  breathing = true;
+  breathing_counter = 0;
+  breathing_halt = BREATHING_NO_HALT;
+  // interrupt already registered
+}
+
+void breathing_pulse(void) {
+  if (get_backlight_level() == 0)
+    breathing_min();
+  else
+    breathing_max();
+  breathing_halt = BREATHING_HALT_ON;
+  // breathing_interrupt_enable();
+  breathing = true;
+}
+
+void breathing_disable(void) {
+  breathing = false;
+  // backlight_set(get_backlight_level());
+  b_led_set(get_backlight_level()); // custom implementation of backlight_set()
+}
+
+void breathing_self_disable(void)
+{
+  if (get_backlight_level() == 0)
+    breathing_halt = BREATHING_HALT_OFF;
+  else
+    breathing_halt = BREATHING_HALT_ON;
+}
+
+void breathing_toggle(void) {
+  if (is_breathing())
+    breathing_disable();
+  else
+    breathing_enable();
+}
+
+void breathing_period_set(uint8_t value)
+{
+  if (!value)
+    value = 1;
+  breathing_period = value;
+}
+
+void breathing_period_default(void) {
+  breathing_period_set(BREATHING_PERIOD);
+}
+
+void breathing_period_inc(void)
+{
+  breathing_period_set(breathing_period+1);
+}
+
+void breathing_period_dec(void)
+{
+  breathing_period_set(breathing_period-1);
+}
+
+/* To generate breathing curve in python:
+ * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
+ */
+static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+// Use this before the cie_lightness function.
+static inline uint16_t scale_backlight(uint16_t v) {
+  return v / BACKLIGHT_LEVELS * get_backlight_level();
+}
+
+void custom_breathing_handler(void) {
+  uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
+  // resetting after one period to prevent ugly reset at overflow.
+  breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
+  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
+
+  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
+      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
+  {
+      // breathing_interrupt_disable();
+  }
+
+  setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
+}
+
+#endif // BACKLIGHT_BREATHING
+#endif  // BACKLIGHT_ENABLE
diff --git a/keyboards/bminiex/config.h b/keyboards/bminiex/config.h
new file mode 100644
index 0000000000..3f160109e3
--- /dev/null
+++ b/keyboards/bminiex/config.h
@@ -0,0 +1,41 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID       0x20A0
+#define PRODUCT_ID      0x422E
+#define MANUFACTURER    winkeyless.kr
+#define PRODUCT         B.mini Ex
+
+#define RGBLED_NUM 20
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 15
+
+#define RGBLIGHT_ANIMATIONS
+
+#define BACKLIGHT_LEVELS 5
+
+#define NO_UART 1
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
diff --git a/keyboards/bminiex/i2c.c b/keyboards/bminiex/i2c.c
new file mode 100644
index 0000000000..a4f9521352
--- /dev/null
+++ b/keyboards/bminiex/i2c.c
@@ -0,0 +1,106 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+// Please do not modify this file 
+
+#include <avr/io.h>
+#include <util/twi.h>
+
+#include "i2c.h"
+
+void i2c_set_bitrate(uint16_t bitrate_khz) {
+    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
+    if (bitrate_div >= 16) {
+        bitrate_div = (bitrate_div - 16) / 2;
+    }
+    TWBR = bitrate_div;
+}
+
+void i2c_init(void) {
+    // set pull-up resistors on I2C bus pins
+    PORTC |= 0b11;
+
+    i2c_set_bitrate(400);
+
+    // enable TWI (two-wire interface)
+    TWCR |= (1 << TWEN);
+
+    // enable TWI interrupt and slave address ACK
+    TWCR |= (1 << TWIE);
+    TWCR |= (1 << TWEA);
+}
+
+uint8_t i2c_start(uint8_t address) {
+    // reset TWI control register
+    TWCR = 0;
+
+    // begin transmission and wait for it to end
+    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the start condition was successfully transmitted
+    if ((TWSR & 0xF8) != TW_START) {
+        return 1;
+    }
+
+    // transmit address and wait
+    TWDR = address;
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the device has acknowledged the READ / WRITE mode
+    uint8_t twst = TW_STATUS & 0xF8;
+    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
+        return 1;
+    }
+
+    return 0;
+}
+
+void i2c_stop(void) {
+    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+}
+
+uint8_t i2c_write(uint8_t data) {
+    TWDR = data;
+
+    // transmit data and wait
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
+        return 1;
+    }
+
+    return 0;
+}
+
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
+    if (i2c_start(address)) {
+        return 1;
+    }
+
+    for (uint16_t i = 0; i < length; i++) {
+        if (i2c_write(data[i])) {
+            return 1;
+        }
+    }
+
+    i2c_stop();
+
+    return 0;
+}
diff --git a/keyboards/bminiex/i2c.h b/keyboards/bminiex/i2c.h
new file mode 100644
index 0000000000..ada8cc7bf1
--- /dev/null
+++ b/keyboards/bminiex/i2c.h
@@ -0,0 +1,25 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+// Please do not modify this file 
+
+#pragma once
+
+void i2c_init(void);
+void i2c_set_bitrate(uint16_t bitrate_khz);
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
+
diff --git a/keyboards/bminiex/info.json b/keyboards/bminiex/info.json
new file mode 100644
index 0000000000..8e38fbfb93
--- /dev/null
+++ b/keyboards/bminiex/info.json
@@ -0,0 +1,340 @@
+{
+  "keyboard_name": "winkeyless.kr B.mini EX",
+  "keyboard_folder": "bminiex",
+  "url": "https://winkeyless.kr/product/b-mini-ex-x2-pcb/",
+  "maintainer": "qmk",
+  "width": 20.25,
+  "height": 6.25,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"label":"ESC", "x":0, "y":0},
+        {"label":"F1", "x":1, "y":0},
+        {"label":"F2", "x":2, "y":0},
+        {"label":"F3", "x":3, "y":0},
+        {"label":"F4", "x":4, "y":0},
+        {"label":"F5", "x":5, "y":0},
+        {"label":"F6", "x":6, "y":0},
+        {"label":"F7", "x":7, "y":0},
+        {"label":"F8", "x":8, "y":0},
+        {"label":"F9", "x":9, "y":0},
+        {"label":"F10", "x":10, "y":0},
+        {"label":"F11", "x":11, "y":0},
+        {"label":"F12", "x":12, "y":0},
+        {"label":"PSCR", "x":13, "y":0},
+        {"label":"HOME", "x":14, "y":0},
+        {"label":"END", "x":15, "y":0},
+        {"label":"NO", "x":16.25, "y":0},
+        {"label":"NO", "x":17.25, "y":0},
+        {"label":"NO", "x":18.25, "y":0},
+        {"label":"NO", "x":19.25, "y":0},
+        {"label":"GRV", "x":0, "y":1.25},
+        {"label":"1", "x":1, "y":1.25},
+        {"label":"2", "x":2, "y":1.25},
+        {"label":"3", "x":3, "y":1.25},
+        {"label":"4", "x":4, "y":1.25},
+        {"label":"5", "x":5, "y":1.25},
+        {"label":"6", "x":6, "y":1.25},
+        {"label":"7", "x":7, "y":1.25},
+        {"label":"8", "x":8, "y":1.25},
+        {"label":"9", "x":9, "y":1.25},
+        {"label":"0", "x":10, "y":1.25},
+        {"label":"MINS", "x":11, "y":1.25},
+        {"label":"EQL", "x":12, "y":1.25},
+        {"label":"BSPC", "x":13, "y":1.25, "w":2},
+        {"label":"DEL", "x":15, "y":1.25},
+        {"label":"NLCK", "x":16.25, "y":1.25},
+        {"label":"PSLS", "x":17.25, "y":1.25},
+        {"label":"PAST", "x":18.25, "y":1.25},
+        {"label":"PMNS", "x":19.25, "y":1.25},
+        {"label":"TAB", "x":0, "y":2.25, "w":1.5},
+        {"label":"Q", "x":1.5, "y":2.25},
+        {"label":"W", "x":2.5, "y":2.25},
+        {"label":"E", "x":3.5, "y":2.25},
+        {"label":"R", "x":4.5, "y":2.25},
+        {"label":"T", "x":5.5, "y":2.25},
+        {"label":"Y", "x":6.5, "y":2.25},
+        {"label":"U", "x":7.5, "y":2.25},
+        {"label":"I", "x":8.5, "y":2.25},
+        {"label":"O", "x":9.5, "y":2.25},
+        {"label":"P", "x":10.5, "y":2.25},
+        {"label":"LBRC", "x":11.5, "y":2.25},
+        {"label":"RBRC", "x":12.5, "y":2.25},
+        {"label":"NO", "x":13.5, "y":2.25, "w":1.5},
+        {"label":"INS", "x":15, "y":2.25},
+        {"label":"P7", "x":16.25, "y":2.25},
+        {"label":"P8", "x":17.25, "y":2.25},
+        {"label":"P9", "x":18.25, "y":2.25},
+        {"label":"CAPS", "x":0, "y":3.25, "w":1.75},
+        {"label":"A", "x":1.75, "y":3.25},
+        {"label":"S", "x":2.75, "y":3.25},
+        {"label":"D", "x":3.75, "y":3.25},
+        {"label":"F", "x":4.75, "y":3.25},
+        {"label":"G", "x":5.75, "y":3.25},
+        {"label":"H", "x":6.75, "y":3.25},
+        {"label":"J", "x":7.75, "y":3.25},
+        {"label":"K", "x":8.75, "y":3.25},
+        {"label":"L", "x":9.75, "y":3.25},
+        {"label":"SCLN", "x":10.75, "y":3.25},
+        {"label":"QUOT", "x":11.75, "y":3.25},
+        {"label":"NUHS", "x":12.75, "y":3.25},
+        {"label":"ENT", "x":13.75, "y":3.25, "w":1.25},
+        {"label":"PGUP", "x":15, "y":3.25},
+        {"label":"P4", "x":16.25, "y":3.25},
+        {"label":"P5", "x":17.25, "y":3.25},
+        {"label":"P6", "x":18.25, "y":3.25},
+        {"label":"PPLS", "x":19.25, "y":2.25, "h":2},
+        {"label":"LSFT", "x":0, "y":4.25, "w":1.25},
+        {"label":"NUBS", "x":1.25, "y":4.25},
+        {"label":"Z", "x":2.25, "y":4.25},
+        {"label":"X", "x":3.25, "y":4.25},
+        {"label":"C", "x":4.25, "y":4.25},
+        {"label":"V", "x":5.25, "y":4.25},
+        {"label":"B", "x":6.25, "y":4.25},
+        {"label":"N", "x":7.25, "y":4.25},
+        {"label":"M", "x":8.25, "y":4.25},
+        {"label":"COMM", "x":9.25, "y":4.25},
+        {"label":"DOT", "x":10.25, "y":4.25},
+        {"label":"SLSH", "x":11.25, "y":4.25},
+        {"label":"RSFT", "x":12.25, "y":4.25, "w":1.75},
+        {"label":"UP", "x":14, "y":4.25},
+        {"label":"PGDN", "x":15, "y":4.25},
+        {"label":"P1", "x":16.25, "y":4.25},
+        {"label":"P2", "x":17.25, "y":4.25},
+        {"label":"P3", "x":18.25, "y":4.25},
+        {"label":"LCTL", "x":0, "y":5.25, "w":1.25},
+        {"label":"LGUI", "x":1.25, "y":5.25, "w":1.25},
+        {"label":"LALT", "x":2.5, "y":5.25, "w":1.25},
+        {"label":"SPC", "x":3.75, "y":5.25, "w":6.25},
+        {"label":"RALT", "x":10, "y":5.25},
+        {"label":"APP", "x":11, "y":5.25},
+        {"label":"RCTL", "x":12, "y":5.25},
+        {"label":"LEFT", "x":13, "y":5.25},
+        {"label":"DOWN", "x":14, "y":5.25},
+        {"label":"RGHT", "x":15, "y":5.25},
+        {"label":"P0", "x":16.25, "y":5.25, "w":2},
+        {"label":"PDOT", "x":18.25, "y":5.25},
+        {"label":"PENT", "x":19.25, "y":4.25, "h":2}
+      ]
+    },
+    "LAYOUT_ansi": {
+      "layout": [
+        {"label":"ESC", "x":0, "y":0}