Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159)

* reset; redoing my steps; and recommit

* include xd002/.noci

1 files changed, 0 insertions, 126 deletions

diff --git a/keyboards/bm68rgb/config.h b/keyboards/bm68rgb/config.h
deleted file mode 100644
index 48844c295f..0000000000
--- a/keyboards/bm68rgb/config.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-Copyright 2021 peepeetee
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID    0x4B50 //KP
-#define PRODUCT_ID   0xEF6F
-#define DEVICE_VER   0x0001
-#define MANUFACTURER KPRepublic
-#define PRODUCT      BM68 RGB
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B0, \
-                          B1, \
-                          B2, \
-                          B3, \
-                          E6 }
-#define MATRIX_COL_PINS {     D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-// The pin connected to the data pin of the LEDs
-#define RGB_DI_PIN E2
-// The number of LEDs connected
-#define DRIVER_LED_TOTAL 74
-#ifdef RGB_DI_PIN
-#    define RGBLED_NUM 74
-#    define RGB_MATRIX_KEYPRESSES // reacts to keypresses
-#    define RGBLIGHT_LIMIT_VAL 180 // Limit to vendor-recommended value
-#endif
-#ifdef RGB_MATRIX_ENABLE
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value
-#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* disable these deprecated features by default */
-#define NO_ACTION_MACRO
-#define NO_ACTION_FUNCTION
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0