Bastard Keyboards: upstream recent changes (#18903)

* bastardkb: cleanup blackpill configuration

Fixes #17

* bastardkb: fix splinky configuration

The pinout of the splinky changed between the last beta batch, and the
production one. This commit updates the keyboard definition to support
the new pinout by default, while offering backward compatibility.

Define `SPLINKY_BETA_PINOUT` to build the firmware with pre-production
pinout.

Fixes #15

* bastardkb: add support for STeMCell

* Update scylla/tbkmini/skeletyl outdated readmes

* bastardkb/dilemma: enable circular scroll

* bastardkb/dilemma: add initial version of the `via` keymap

* bastardkb/dilemma/assembled: add new keyboard

Fixes #20

* bastardkb/dilemma: remove elite-c

* Initial support for the Dilemma 3x5+3 Assembled RGB

* Address code review comments

* Address more comments

* Address review comments

* Address more nits

* bastardkb: split splinky-based keyboards to distinguish between Splinky v2 and v3 pinout

3 files changed, 0 insertions, 48 deletions

diff --git a/keyboards/bastardkb/dilemma/elitec/config.h b/keyboards/bastardkb/dilemma/elitec/config.h
deleted file mode 100644
index 0f26e46fdb..0000000000
--- a/keyboards/bastardkb/dilemma/elitec/config.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Key matrix configuration. */
-#define MATRIX_ROW_PINS \
-    { D4, C6, F5, F7 }
-#define MATRIX_COL_PINS \
-    { B4, B5, E6, D7, F6 }
-
-/* Handedness. */
-#define MASTER_RIGHT
-
-// To use the handedness pin, resistors need to be installed on the PCB.
-// If so, uncomment the following code, and undefine MASTER_RIGHT above.
-//#define SPLIT_HAND_PIN F4
-// If you've soldered the handedness pull-up on the upper side instead of the
-// left one, uncomment the following line.
-//#define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
-
-/* serial.c configuration (for split keyboard). */
-#define SOFT_SERIAL_PIN D2
diff --git a/keyboards/bastardkb/dilemma/elitec/info.json b/keyboards/bastardkb/dilemma/elitec/info.json
deleted file mode 100644
index f5916f3ab1..0000000000
--- a/keyboards/bastardkb/dilemma/elitec/info.json
+++ /dev/null
@@ -1,6 +0,0 @@
-{
-    "keyboard_name": "Dilemma Elite-C",
-    "usb": {
-      "device_version": "1.0.0",
-    },
-}
diff --git a/keyboards/bastardkb/dilemma/elitec/rules.mk b/keyboards/bastardkb/dilemma/elitec/rules.mk
deleted file mode 100644
index e8326bcf09..0000000000
--- a/keyboards/bastardkb/dilemma/elitec/rules.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu