Bastard Keyboards: upstream recent changes (#19083)

Co-authored-by: Simian <alex@Mandelbrot>
Co-authored-by: Charly Delay <0xcharly@users.noreply.github.com>
Co-authored-by: Alex Baldwin <alexbaldwin42@gmail.com>

6 files changed, 21 insertions, 78 deletions

diff --git a/keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json b/keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json
index 7c90e5d5a3..78453c44ff 100644
--- a/keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json
+++ b/keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json
@@ -1,6 +1,6 @@
 {
     "keyboard_name": "Charybdis Nano (3x5) Elite-C",
     "usb": {
-      "device_version": "2.0.0",
-    },
+        "device_version": "2.0.0"
+    }
 }
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h
index d4688aef92..8e4a2de892 100644
--- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h
@@ -21,14 +21,6 @@
 #define MATRIX_ROW_PINS \
     { GP26, GP5, GP4, GP9 }
 
-/* Handedness. */
-#define MASTER_RIGHT
-
-// To use the handedness pin, resistors need to be installed on the adapter PCB.
-// If so, uncomment the following code, and undefine MASTER_RIGHT above.
-// #define SPLIT_HAND_PIN GP13
-// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
-
 /* serial.c configuration (for split keyboard). */
 #define SOFT_SERIAL_PIN GP1
 
@@ -43,68 +35,3 @@
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U
-
-/** RGB Matrix. */
-
-#ifdef RGB_MATRIX_ENABLE
-// Enable all animations on ARM boards since they have plenty of memory
-// available for it.
-#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
-#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
-#    define ENABLE_RGB_MATRIX_BREATHING
-#    define ENABLE_RGB_MATRIX_BAND_SAT
-#    define ENABLE_RGB_MATRIX_BAND_VAL
-#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-#    define ENABLE_RGB_MATRIX_CYCLE_ALL
-#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
-#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
-#    define ENABLE_RGB_MATRIX_DUAL_BEACON
-#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
-#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
-#    define ENABLE_RGB_MATRIX_RAINDROPS
-#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
-#    define ENABLE_RGB_MATRIX_HUE_BREATHING
-#    define ENABLE_RGB_MATRIX_HUE_PENDULUM
-#    define ENABLE_RGB_MATRIX_HUE_WAVE
-#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
-#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-#    define ENABLE_RGB_MATRIX_SPLASH
-#    define ENABLE_RGB_MATRIX_MULTISPLASH
-#    define ENABLE_RGB_MATRIX_SOLID_SPLASH
-#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
-
-// Limit maximum brightness to keep power consumption reasonable, and avoid
-// disconnects.
-#    undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
-
-// Rainbow swirl as startup mode.
-#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
-
-// Slow swirl at startup.
-#    define RGB_MATRIX_STARTUP_SPD 32
-
-// Startup values.
-#    define RGB_MATRIX_STARTUP_HUE 0
-#    define RGB_MATRIX_STARTUP_SAT 255
-#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#    define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
-#endif // RGB_MATRIX_ENABLE
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json b/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json
index 1aa1e8811d..98f436f52b 100644
--- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json
@@ -1,6 +1,6 @@
 {
     "keyboard_name": "Charybdis Nano (3x5) Splinky",
     "usb": {
-      "device_version": "2.0.0",
-    },
+        "device_version": "2.0.0"
+    }
 }
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/config.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/config.h
index 70b65a97c7..516f3d9df7 100644
--- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/config.h
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/config.h
@@ -25,3 +25,11 @@
 #define SPI_SCK_PIN GP18
 #define SPI_MOSI_PIN GP19
 #define POINTING_DEVICE_CS_PIN GP14
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define SPLIT_HAND_PIN GP13
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/config.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/config.h
index d53c5a3c41..09165a8e97 100644
--- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/config.h
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/config.h
@@ -25,3 +25,11 @@
 #define SPI_SCK_PIN GP22
 #define SPI_MOSI_PIN GP23
 #define POINTING_DEVICE_CS_PIN GP16
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define SPLIT_HAND_PIN GP15
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/stemcell/info.json b/keyboards/bastardkb/charybdis/3x5/v2/stemcell/info.json
index 2aee1fe40b..b344c1cbfc 100644
--- a/keyboards/bastardkb/charybdis/3x5/v2/stemcell/info.json
+++ b/keyboards/bastardkb/charybdis/3x5/v2/stemcell/info.json
@@ -1,6 +1,6 @@
 {
     "keyboard_name": "Charybdis Nano (3x5) STeMCell",
     "usb": {
-      "device_version": "2.0.0"
+        "device_version": "2.0.0"
     }
 }