Add support for rev3 of the Atom47 (#2672)

* Added support for rev3 of the Atom47

* Updated Atom47 readme's

* Fix redefine error on rev2 and add maartenwut's keymap

* Fix redefine error on LEdiodes keymap

21 files changed, 363 insertions, 67 deletions

diff --git a/keyboards/atom47/atom47.c b/keyboards/atom47/atom47.c
index 7b839e7967..fac22f7786 100644
--- a/keyboards/atom47/atom47.c
+++ b/keyboards/atom47/atom47.c
@@ -16,16 +16,9 @@ void matrix_scan_kb(void) {
 
 void led_init_ports(void) {
     // * Set our LED pins as output
-    DDRB &= ~(1<<5);
+    DDRE |= (1 << 6);
 }
 
 void led_set_kb(uint8_t usb_led) {
-	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTF |= (1<<5);
-    } else {
-        // Turn capslock off
-        PORTF &= ~(1<<5);
-    }
-	led_set_user(usb_led);
+    led_set_user(usb_led);
 }
diff --git a/keyboards/atom47/atom47.h b/keyboards/atom47/atom47.h
index 2c19a20cc5..eddc5c8f87 100644
--- a/keyboards/atom47/atom47.h
+++ b/keyboards/atom47/atom47.h
@@ -9,14 +9,14 @@
 #define KEYMAP_ANSI( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,      k2c, \
-	k30, k31, k32, k33, k34,      k36,      k38, k39, k3a,      k3c \
+	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
+	k30, k31, k32, k33,      k35,      k37,      k39, k3a, k3b, k3c \
 ) \
 { \
     {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
 	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
-	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
-	{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c}  \
+	{k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \
+	{k30, k31, k32, k33, XXX, k35, XXX, k37, XXX, k39, k3a, k3b, k3c}  \
 }
 
 void matrix_init_user(void);
diff --git a/keyboards/atom47/config.h b/keyboards/atom47/config.h
index 410650f719..5743a9eb53 100644
--- a/keyboards/atom47/config.h
+++ b/keyboards/atom47/config.h
@@ -34,8 +34,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // ROWS: Top to bottom, COLS: Left to right
 
-#define MATRIX_ROW_PINS {B1,B2,B3,B7}
-#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
+#define MATRIX_ROW_PINS {B3,B2,B1,B0}
+#define MATRIX_COL_PINS {B7,F0,F1,F4,F6,D4,D6,D7,B4,B5,C6,C7,F7}
 #define UNUSED_PINS
 
 #define BACKLIGHT_PIN B6
@@ -49,10 +49,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCING_DELAY 5
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
 
 /* key combination for command */
 #define IS_COMMAND() ( \
@@ -63,11 +59,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define BACKLIGHT_LEVELS 4
 
-#endif
+#define RGB_DI_PIN F5    // The pin the LED strip is connected to
+#define RGBLED_NUM 6     // Number of LEDs in your strip
 
-#define RGB_DI_PIN D0    // The pin the LED strip is connected to
-#define RGBLED_NUM 1     // Number of LEDs in your strip
+#define QMK_ESC_OUTPUT B7 // usually COL
+#define QMK_ESC_INPUT B3 // usually ROW
+#define QMK_LED E6
 
-#define QMK_ESC_OUTPUT D7 // usually COL
-#define QMK_ESC_INPUT B1 // usually ROW
-#define QMK_LED B6
\ No newline at end of file
+#endif
diff --git a/keyboards/atom47/keymaps/default/keymap.c b/keyboards/atom47/keymaps/default/keymap.c
index cd8e622f20..233ff2b8b7 100644
--- a/keyboards/atom47/keymaps/default/keymap.c
+++ b/keyboards/atom47/keymaps/default/keymap.c
@@ -1,4 +1,4 @@
-#include QMK_KEYBOARD_H
+#include "atom47.h"
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -16,24 +16,37 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_MA] = KEYMAP_ANSI(
   KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
   KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
-  KC_LSFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,				MO(_FN1),	\
-  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_PN),	KC_SPC, 				KC_SPC,					MO(_FN),	KC_RALT,	KC_APP,					KC_RCTRL),	\
+  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,	MO(_FN1),	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_PN),				KC_SPC, 				KC_SPC,					MO(_FN),	KC_RALT,	KC_APP,		KC_RCTRL),	\
  
 [_FN] = KEYMAP_ANSI(
   _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
   KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,				_______,	\
-  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+  _______,					_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
  
 [_FN1] = KEYMAP_ANSI(
   KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
   KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
-  _______,		_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,				_______,	\
-  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+  _______,					_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
  
 [_PN] = KEYMAP_ANSI(
   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
-  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				RESET),
-};
\ No newline at end of file
+  RGB_TOG,		RGB_HUI,	RGB_SAI,	RGB_VAI,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  RGB_MOD,					RGB_HUD,	RGB_SAD,	RGB_VAD,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),
+};
+
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+ 	   	PORTE &= ~(1 << 6);
+
+
+    } else {
+        // Turn capslock off
+    	PORTE |= (1 << 6);
+    }
+}
+
diff --git a/keyboards/atom47/keymaps/default/readme.md b/keyboards/atom47/keymaps/default/readme.md
index 02422eb976..6795953857 100644
--- a/keyboards/atom47/keymaps/default/readme.md
+++ b/keyboards/atom47/keymaps/default/readme.md
@@ -1,10 +1 @@
-To be updated...
-
-
-// This layer is just a blank template to be copied for easy layer creation. please don not edit it.
-
- [_LX] = KEYMAP_ANSI(
-   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
-   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
-   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
-   _______,		_______,	_______,	_______,	    _______, 			_______,			               	_______,	_______,	_______,	RESET),
+This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.
diff --git a/keyboards/atom47/keymaps/maartenwut/keymap.c b/keyboards/atom47/keymaps/maartenwut/keymap.c
new file mode 100644
index 0000000000..7de75e10ec
--- /dev/null
+++ b/keyboards/atom47/keymaps/maartenwut/keymap.c
@@ -0,0 +1,46 @@
+#include "atom47.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _MA 0 //Main layer
+#define _LO 1 //FN1
+#define _RA 2 //FN
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = KEYMAP_ANSI(
+  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
+  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
+  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	KC_RSFT,	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_LO),				KC_SPC, 				KC_SPC,					MO(_RA),	KC_RALT,	KC_APP,		KC_RCTRL),	\
+
+[_RA] = KEYMAP_ANSI(
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	KC_PGUP,	KC_UP,		KC_PGDN,	_______,	_______,	_______,	\
+  KC_CAPS,		_______,	_______,	_______,	_______,	_______,	_______,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	_______,				_______,	\
+  _______,					_______,	_______,	_______,	_______,	_______,	_______,	_______,	KC_VOLD,	KC_VOLU,	KC_MPLY,	KC_PSCR,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
+
+[_LO] = KEYMAP_ANSI(
+  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
+  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
+  _______,					_______,	_______,	_______,	_______,	_______,	_______,	KC_QUOT,	KC_LBRC,	KC_RBRC,	KC_BSLS,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),	\
+
+};
+
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+ 	   	PORTE &= ~(1 << 6);
+
+
+    } else {
+        // Turn capslock off
+    	PORTE |= (1 << 6);
+    }
+}
+
diff --git a/keyboards/atom47/keymaps/maartenwut/readme.md b/keyboards/atom47/keymaps/maartenwut/readme.md
new file mode 100644
index 0000000000..6795953857
--- /dev/null
+++ b/keyboards/atom47/keymaps/maartenwut/readme.md
@@ -0,0 +1 @@
+This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.
diff --git a/keyboards/atom47/readme.md b/keyboards/atom47/readme.md
index fec7843ae4..f2ec08500e 100644
--- a/keyboards/atom47/readme.md
+++ b/keyboards/atom47/readme.md
@@ -1,28 +1,26 @@
-# ATOM47
+# Atom47
 
-![ATOM47](https://i.imgur.com/rjrFTKT.png)
+![Atom47](https://i.imgur.com/Wwflqvt.png)
 
 ## Support
-Keyboard Maintainer: [Matthew Kerfoot(https://github.com/mkerfoot)  
-Hardware Supported: ATOM47  
+Keyboard Maintainer: [Maarten Dekkers(https://github.com/maartenwut)  
+Hardware Supported: Atom47 rev3
 Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221)  
 
 
 ## Features
-QMK Firmware
-6 Underglow RGB leds
-In-switch leds
-Through-hole micro usb connector (less likely to break off!)
-South facing leds for the QMX/Zealencio users
-Multiple layouts
-Easily reachable reset button under the spacebar
-CapsLock indicator
+- QMK Firmware  
+- 6 Underglow RGB leds  
+- In-switch leds  
+- Through-hole micro usb connector (less likely to break off!)  
+- South facing leds for the QMX/Zealencio users  
+- Multiple layouts  
+- Easily reachable reset button under the spacebar  
+- CapsLock indicator  
 
 ## Build
 To build the default keymap, simply run `make atom47:default`.
 
-For an alternative, heavily modified layout you would just need to run `make atom47:LEdiodes`.
-
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
 
-![ATOM47](https://i.imgur.com/WebeUOF.png)
+![Atom47](https://i.imgur.com/JfYnOba.jpg)
diff --git a/keyboards/atom47/keymaps/LEdiodes/atom47.c b/keyboards/atom47/rev2/atom47.c
index 7b839e7967..7b839e7967 100644
--- a/keyboards/atom47/keymaps/LEdiodes/atom47.c
+++ b/keyboards/atom47/rev2/atom47.c
diff --git a/keyboards/atom47/keymaps/LEdiodes/atom47.h b/keyboards/atom47/rev2/atom47.h
index 2c19a20cc5..2c19a20cc5 100644
--- a/keyboards/atom47/keymaps/LEdiodes/atom47.h
+++ b/keyboards/atom47/rev2/atom47.h
diff --git a/keyboards/atom47/keymaps/LEdiodes/config.h b/keyboards/atom47/rev2/config.h
index 410650f719..82e8baaefb 100644
--- a/keyboards/atom47/keymaps/LEdiodes/config.h
+++ b/keyboards/atom47/rev2/config.h
@@ -63,11 +63,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define BACKLIGHT_LEVELS 4
 
-#endif
-
 #define RGB_DI_PIN D0    // The pin the LED strip is connected to
 #define RGBLED_NUM 1     // Number of LEDs in your strip
 
 #define QMK_ESC_OUTPUT D7 // usually COL
 #define QMK_ESC_INPUT B1 // usually ROW
-#define QMK_LED B6
\ No newline at end of file
+#define QMK_LED B6
+
+#endif
diff --git a/keyboards/atom47/rev2/keymaps/LEdiodes/atom47.c b/keyboards/atom47/rev2/keymaps/LEdiodes/atom47.c
new file mode 100644
index 0000000000..7b839e7967
--- /dev/null
+++ b/keyboards/atom47/rev2/keymaps/LEdiodes/atom47.c
@@ -0,0 +1,31 @@
+#include "atom47.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB &= ~(1<<5);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTF |= (1<<5);
+    } else {
+        // Turn capslock off
+        PORTF &= ~(1<<5);
+    }
+	led_set_user(usb_led);
+}
diff --git a/keyboards/atom47/rev2/keymaps/LEdiodes/atom47.h b/keyboards/atom47/rev2/keymaps/LEdiodes/atom47.h
new file mode 100644
index 0000000000..2c19a20cc5
--- /dev/null
+++ b/keyboards/atom47/rev2/keymaps/LEdiodes/atom47.h
@@ -0,0 +1,25 @@
+#ifndef ATOM47_H
+#define ATOM47_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define KEYMAP_ANSI( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,      k2c, \
+	k30, k31, k32, k33, k34,      k36,      k38, k39, k3a,      k3c \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
+	{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
diff --git a/keyboards/atom47/rev2/keymaps/LEdiodes/config.h b/keyboards/atom47/rev2/keymaps/LEdiodes/config.h
new file mode 100644
index 0000000000..e054f27759
--- /dev/null
+++ b/keyboards/atom47/rev2/keymaps/LEdiodes/config.h
@@ -0,0 +1,74 @@
+/*
+Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    Vortex
+#define PRODUCT         Core
+#define DESCRIPTION     Atom47 PCB for the Vortex Core
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B1,B2,B3,B7}
+#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+#define RGB_DI_PIN D0    // The pin the LED strip is connected to
+#define RGBLED_NUM 1     // Number of LEDs in your strip
+
+#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_INPUT B1 // usually ROW
+#define QMK_LED B6
+
+#endif
+
diff --git a/keyboards/atom47/keymaps/LEdiodes/keymap.c b/keyboards/atom47/rev2/keymaps/LEdiodes/keymap.c
index 3ea8609b61..75c8654ba6 100644
--- a/keyboards/atom47/keymaps/LEdiodes/keymap.c
+++ b/keyboards/atom47/rev2/keymaps/LEdiodes/keymap.c
@@ -1,4 +1,4 @@
-#include QMK_KEYBOARD_H
+#include "atom47.h"
 
 // These are all aliases for the  function layers.
 #define _L0 0
diff --git a/keyboards/atom47/keymaps/LEdiodes/rules.mk b/keyboards/atom47/rev2/keymaps/LEdiodes/rules.mk
index d446d3a699..d446d3a699 100644
--- a/keyboards/atom47/keymaps/LEdiodes/rules.mk
+++ b/keyboards/atom47/rev2/keymaps/LEdiodes/rules.mk
diff --git a/keyboards/atom47/rev2/keymaps/default/keymap.c b/keyboards/atom47/rev2/keymaps/default/keymap.c
new file mode 100644
index 0000000000..1473863c4e
--- /dev/null
+++ b/keyboards/atom47/rev2/keymaps/default/keymap.c
@@ -0,0 +1,39 @@
+#include "atom47.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _MA 0 //Main layer
+#define _FN 1 //Fn
+#define _FN1 2 //Fn1
+#define _PN 3 //Pn
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = KEYMAP_ANSI(
+  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
+  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
+  KC_LSFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,				MO(_FN1),	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_PN),	KC_SPC, 				KC_SPC,					MO(_FN),	KC_RALT,	KC_APP,					KC_RCTRL),	\
+ 
+[_FN] = KEYMAP_ANSI(
+  _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
+  KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_FN1] = KEYMAP_ANSI(
+  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
+  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
+  _______,		_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_PN] = KEYMAP_ANSI(
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				RESET),
+};
diff --git a/keyboards/atom47/rev2/keymaps/default/readme.md b/keyboards/atom47/rev2/keymaps/default/readme.md
new file mode 100644
index 0000000000..ab86b4f128
--- /dev/null
+++ b/keyboards/atom47/rev2/keymaps/default/readme.md
@@ -0,0 +1 @@
+This is the default keymap as found on the Vortex Core, with some added buttons for backlight control.
diff --git a/keyboards/atom47/rev2/readme.md b/keyboards/atom47/rev2/readme.md
new file mode 100644
index 0000000000..18ee85d54f
--- /dev/null
+++ b/keyboards/atom47/rev2/readme.md
@@ -0,0 +1,23 @@
+# Atom47 rev2
+
+This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it.
+
+## Support
+Keyboard Maintainer: [Matthew Kerfoot(https://github.com/mkerfoot)  
+Hardware Supported: Atom47 rev2  
+Hardware Availability: None  
+
+
+## Features
+- QMK Firmware  
+- In-switch leds  
+- Through-hole micro usb connector (less likely to break off!)  
+- Easily reachable reset button under the spacebar  
+- In-switch CapsLock indicator  
+
+## Build
+To build the default keymap, simply run `make atom47/rev2:default`.
+
+For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`.
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/atom47/rev2/rules.mk b/keyboards/atom47/rev2/rules.mk
new file mode 100644
index 0000000000..d446d3a699
--- /dev/null
+++ b/keyboards/atom47/rev2/rules.mk
@@ -0,0 +1,65 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/atom47/rules.mk b/keyboards/atom47/rules.mk
index d446d3a699..9b3263afd6 100644
--- a/keyboards/atom47/rules.mk
+++ b/keyboards/atom47/rules.mk
@@ -56,8 +56,8 @@ MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
 CONSOLE_ENABLE = no	# Console for debug(+400)
 COMMAND_ENABLE = no    # Commands for debug and configuration
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+NKRO_ENABLE = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality (+4870)
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
 MIDI_ENABLE = no 		# MIDI controls
 AUDIO_ENABLE = no