Merge remote-tracking branch 'upstream/master'

* upstream/master: (1239 commits)
  Update ez.c
  removes planck/rev3 temporarily
  Move hand_swap_config to ez.c, removes error for infinity
  Update Makefile
  ergodox: Update algernon's keymap to v1.9
  Added VS Code dir to .gitignore
  Support the Pegasus Hoof controller.
  [Jack & Erez] Simplifies and documents TO
  add readme
  use wait_ms instead of _delay_ms
  add messenger
  init keymap
  Add example keymap
  Adding whiskey_tango_foxtrot_capslock ergodox keymap
  Unicode map framework. Allow unicode up to 0xFFFFF using separate mapping table
  CIE 1931 dim curve
  Apply the dim curve to the RGB output
  Update the Cluecard readme files
  Tune snake and knight intervals for Cluecard
  Tunable RGB light intervals
  ...

13 files changed, 1218 insertions, 0 deletions

diff --git a/keyboards/arrow_pad/Makefile b/keyboards/arrow_pad/Makefile
new file mode 100644
index 0000000000..4e2a6f00fd
--- /dev/null
+++ b/keyboards/arrow_pad/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/arrow_pad/arrow_pad.c b/keyboards/arrow_pad/arrow_pad.c
new file mode 100644
index 0000000000..381934aa88
--- /dev/null
+++ b/keyboards/arrow_pad/arrow_pad.c
@@ -0,0 +1 @@
+#include "arrow_pad.h"
\ No newline at end of file
diff --git a/keyboards/arrow_pad/arrow_pad.h b/keyboards/arrow_pad/arrow_pad.h
new file mode 100644
index 0000000000..62882b9b54
--- /dev/null
+++ b/keyboards/arrow_pad/arrow_pad.h
@@ -0,0 +1,13 @@
+#ifndef ARROW_PAD_H
+#define ARROW_PAD_H
+
+#include "quantum.h"
+#include "matrix.h"
+#include "keymap.h"
+#ifdef BACKLIGHT_ENABLE
+	#include "backlight.h"
+#endif
+#include <avr/io.h>
+#include <stddef.h>
+
+#endif
diff --git a/keyboards/arrow_pad/config.h b/keyboards/arrow_pad/config.h
new file mode 100644
index 0000000000..3d8d8709a5
--- /dev/null
+++ b/keyboards/arrow_pad/config.h
@@ -0,0 +1,160 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x4096
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Nobody
+#define PRODUCT         GoldPad
+#define DESCRIPTION     A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
+#define MATRIX_COL_PINS { B0, B1, B2, B3 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B7
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/arrow_pad/keymaps/default/keymap.c b/keyboards/arrow_pad/keymaps/default/keymap.c
new file mode 100644
index 0000000000..5647f75afe
--- /dev/null
+++ b/keyboards/arrow_pad/keymaps/default/keymap.c
@@ -0,0 +1,163 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "arrow_pad.h"
+#include "led.h"
+
+// This is the 21-key keypad to 2x11 element matrix mapping
+#define KEYMAP( \
+    KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
+    KM_NUM, KM_FSL, KM_AST, KM_MIN, \
+    KM___7, KM___8, KM___9, KM_EQU, \
+    KM___4, KM___5, KM___6, KM_PLS, \
+    KM___1, KM___2, KM___3, ___ENT, \
+    KM___0, _____0, KM_DOT, KM_ENT  \
+) { \
+    { KM_ESC, KM_TAB, KM_BSL, KM_ARR  }, \
+    { KM_NUM, KM_FSL, KM_AST, KM_MIN  }, \
+    { KM___7, KM___8, KM___9, KM_EQU  }, \
+    { KM___4, KM___5, KM___6, KM_PLS  }, \
+    { KM___1, KM___2, KM___3, KC_NO   }, \
+    { KM___0, KC_NO,  KM_DOT, KM_ENT  }  \
+}
+
+#define LAYER_BASE                      0
+#define LAYER_EDIT                      1
+#define LAYER_FUNCTION                  2
+
+#define MACRO_COPY_CUT                  0
+#define MACRO_SHIFT_CONTROL             1
+#define MACRO_CONTROL_ALT               2
+
+#define M_COPY              KC_FN5
+#define M_SHFCT             KC_FN6
+#define M_CTALT             KC_FN7
+
+#define SC_UNDO             LCTL(KC_Z)
+#define SC_REDO             LCTL(KC_Y)
+#define SC_CUT              LCTL(KC_X)
+#define SC_COPY             LCTL(KC_C)
+#define SC_PSTE             LCTL(KC_V)
+#define SC_SELA             LCTL(KC_A)
+#define SC_SAVE             LCTL(KC_S)
+#define SC_OPEN             LCTL(KC_O)
+#define SC_ACLS             LALT(KC_F4)
+#define SC_CCLS             LCTL(KC_F4)
+
+#define _______             KC_TRNS
+#define XXXXXXX             KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[LAYER_BASE] = KEYMAP(                \
+  KC_ESC,  KC_TAB,  KC_BSLS, KC_FN0,  \
+  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
+  KC_P7,   KC_P8,   KC_P9,   KC_PEQL, \
+  KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+  KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
+  KC_P0,   KC_PCMM, KC_PDOT, KC_PENT  ),
+
+[LAYER_EDIT] = KEYMAP(                \
+  KC_ESC,  KC_TAB,  KC_SPC,  _______, \
+  KC_FN1,  SC_PSTE, SC_REDO, SC_UNDO, \
+  KC_HOME, KC_UP,   KC_PGUP, KC_LALT, \
+  KC_LEFT, M_COPY,  KC_RGHT, KC_LCTL, \
+  KC_END,  KC_DOWN, KC_PGDN, XXXXXXX, \
+  KC_BSPC, KC_PENT, KC_DEL,  M_SHFCT),
+
+[LAYER_FUNCTION] = KEYMAP(            \
+  KC_FN2,  KC_FN3,  KC_FN4,  _______, \
+  KC_FN1,  _______, _______, _______, \
+  _______, _______, _______, _______, \
+  _______, _______, _______, _______, \
+  _______, _______, _______, XXXXXXX, \
+  RESET,   _______, _______, _______  ),
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION),
+	[1] = ACTION_LAYER_TOGGLE(LAYER_EDIT),
+	[2] = ACTION_BACKLIGHT_TOGGLE(),
+	[3] = ACTION_BACKLIGHT_INCREASE(),
+	[4] = ACTION_BACKLIGHT_DECREASE(),
+	[5] = ACTION_MACRO_TAP(MACRO_COPY_CUT),
+    [6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL),
+    [7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT),
+
+};
+
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+}
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+    switch (id) {
+
+    case MACRO_COPY_CUT:
+        if (record->event.pressed) {
+            register_code(KC_LCTL);
+            if (record->tap.count == 1) {
+                register_code(KC_C);
+                unregister_code(KC_C);
+            }
+            else if (record->tap.count == 2) {
+                register_code(KC_X);
+                unregister_code(KC_X);
+            }
+            unregister_code(KC_LCTL);
+        }
+        break;
+
+    case MACRO_SHIFT_CONTROL:
+        if (record->event.pressed) {
+            if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT));
+            if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL));
+            if (record->tap.count == 3) register_code(KC_PENT);;
+        }
+        else {
+            unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL));
+            unregister_code(KC_PENT);
+        }
+        break;
+
+    case MACRO_CONTROL_ALT:
+        if (record->event.pressed) {
+            if (record->tap.count < 2)  register_mods(MOD_BIT(KC_LCTL));
+            if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT));
+        }
+        else {
+            unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT));
+        }
+        break;
+    }
+
+    return MACRO_NONE;
+}
+
+void led_set_user(uint8_t usb_led)
+{
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output high
+        DDRD |= (1<<6);
+        PORTD |= (1<<6);
+    } else {
+        // Hi-Z
+        DDRD &= ~(1<<6);
+        PORTD &= ~(1<<6);
+    }
+    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+        // output low
+        DDRC |= (1<<7);
+        PORTC |= ~(1<<7);
+    } else {
+        // Hi-Z
+        DDRC &= ~(1<<7);
+        PORTC &= ~(1<<7);
+    }
+}
\ No newline at end of file
diff --git a/keyboards/arrow_pad/keymaps/pad_21/Makefile b/keyboards/arrow_pad/keymaps/pad_21/Makefile
new file mode 100644
index 0000000000..af51976a89
--- /dev/null
+++ b/keyboards/arrow_pad/keymaps/pad_21/Makefile
@@ -0,0 +1,17 @@
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = no  # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+
+CONFIG_H = keymaps/$(KEYMAP)/config.h
\ No newline at end of file
diff --git a/keyboards/arrow_pad/keymaps/pad_21/config.h b/keyboards/arrow_pad/keymaps/pad_21/config.h
new file mode 100644
index 0000000000..a095e87374
--- /dev/null
+++ b/keyboards/arrow_pad/keymaps/pad_21/config.h
@@ -0,0 +1,158 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x4097
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Nobody
+#define PRODUCT         Arrow Pad 21
+#define DESCRIPTION     21-Key QMK Assistant
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 11
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/arrow_pad/keymaps/pad_21/keymap.c b/keyboards/arrow_pad/keymaps/pad_21/keymap.c
new file mode 100644
index 0000000000..28917a5d9e
--- /dev/null
+++ b/keyboards/arrow_pad/keymaps/pad_21/keymap.c
@@ -0,0 +1,160 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "arrow_pad.h"
+#include "led.h"
+
+// This is the 21-key keypad to 2x11 element matrix mapping
+#define KEYMAP( \
+    KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
+    KM_NUM, KM_FSL, KM_AST, KM_MIN, \
+    KM___7, KM___8, KM___9, ___PLS, \
+    KM___4, KM___5, KM___6, KM_PLS, \
+    KM___1, KM___2, KM___3, ___ENT, \
+    KM___0, _____0, KM_DOT, KM_ENT  \
+) { \
+    { KM_ESC, KM_TAB, KM_BSL, KM_ARR, KM___7, KM___8, KM___9, KM_PLS, KM___1, KM___2, KM___3, }, \
+    { KM_NUM, KM_FSL, KM_AST, KM_MIN, KM___4, KM___5, KM___6, KM_ENT, KC_NO,  KM___0, KM_DOT, }, \
+}
+
+
+#define LAYER_BASE                      0
+#define LAYER_EDIT                      1
+#define LAYER_FUNCTION                  2
+
+#define MACRO_COPY_CUT                  0
+#define MACRO_SHIFT_CONTROL             1
+#define MACRO_CONTROL_ALT               2
+
+#define M_COPY              KC_FN5
+#define M_SHFCT             KC_FN6
+#define M_CTALT             KC_FN7
+
+#define SC_UNDO             LCTL(KC_Z)
+#define SC_REDO             LCTL(KC_Y)
+#define SC_CUT              LCTL(KC_X)
+#define SC_COPY             LCTL(KC_C)
+#define SC_PSTE             LCTL(KC_V)
+#define SC_SELA             LCTL(KC_A)
+#define SC_SAVE             LCTL(KC_S)
+#define SC_OPEN             LCTL(KC_O)
+#define SC_ACLS             LALT(KC_F4)
+#define SC_CCLS             LCTL(KC_F4)
+
+#define _______             KC_TRNS
+#define XXXXXXX             KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[LAYER_BASE] = KEYMAP(                \
+  KC_ESC,  KC_TAB,  KC_BSLS, KC_FN0,  \
+  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
+  KC_P7,   KC_P8,   KC_P9,   XXXXXXX, \
+  KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+  KC_P1,   KC_P2,   KC_P3,   XXXXXXX, \
+  KC_P0,   XXXXXXX, KC_PDOT, KC_PENT  ),
+
+[LAYER_EDIT] = KEYMAP(                \
+  KC_ESC,  KC_TAB,  KC_SPC,  _______, \
+  KC_FN1,  SC_PSTE, SC_REDO, SC_UNDO, \
+  KC_HOME, KC_UP,   KC_PGUP, XXXXXXX, \
+  KC_LEFT, M_COPY,  KC_RGHT, M_CTALT, \
+  KC_END,  KC_DOWN, KC_PGDN, XXXXXXX, \
+  KC_BSPC, XXXXXXX, KC_DEL,  M_SHFCT),
+
+[LAYER_FUNCTION] = KEYMAP(            \
+  KC_FN2,  KC_FN3,  KC_FN4,  _______, \
+  KC_FN1,  _______, _______, _______, \
+  _______, _______, _______, XXXXXXX, \
+  _______, _______, _______, _______, \
+  _______, _______, _______, XXXXXXX, \
+  RESET,   XXXXXXX, _______, _______  ),
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION),
+	[1] = ACTION_LAYER_TOGGLE(LAYER_EDIT),
+	[2] = ACTION_BACKLIGHT_TOGGLE(),
+	[3] = ACTION_BACKLIGHT_INCREASE(),
+	[4] = ACTION_BACKLIGHT_DECREASE(),
+	[5] = ACTION_MACRO_TAP(MACRO_COPY_CUT),
+    [6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL),
+    [7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT),
+
+};
+
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+}
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+    switch (id) {
+
+    case MACRO_COPY_CUT:
+        if (record->event.pressed) {
+            register_code(KC_LCTL);
+            if (record->tap.count == 1) {
+                register_code(KC_C);
+                unregister_code(KC_C);
+            }
+            else if (record->tap.count == 2) {
+                register_code(KC_X);
+                unregister_code(KC_X);
+            }
+            unregister_code(KC_LCTL);
+        }
+        break;
+
+    case MACRO_SHIFT_CONTROL:
+        if (record->event.pressed) {
+            if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT));
+            if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL));
+            if (record->tap.count == 3) register_code(KC_PENT);;
+        }
+        else {
+            unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL));
+            unregister_code(KC_PENT);
+        }
+        break;
+
+    case MACRO_CONTROL_ALT:
+        if (record->event.pressed) {
+            if (record->tap.count < 2)  register_mods(MOD_BIT(KC_LCTL));
+            if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT));
+        }
+        else {
+            unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT));
+        }
+        break;
+    }
+
+    return MACRO_NONE;
+}
+
+void led_set_user(uint8_t usb_led)
+{
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output high
+        DDRD |= (1<<6);
+        PORTD |= (1<<6);
+    } else {
+        // Hi-Z
+        DDRD &= ~(1<<6);
+        PORTD &= ~(1<<6);
+    }
+    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+        // output low
+        DDRC |= (1<<7);
+        PORTC |= ~(1<<7);
+    } else {
+        // Hi-Z
+        DDRC &= ~(1<<7);
+        PORTC &= ~(1<<7);
+    }
+}
\ No newline at end of file
diff --git a/keyboards/arrow_pad/keymaps/pad_24/Makefile b/keyboards/arrow_pad/keymaps/pad_24/Makefile
new file mode 100644
index 0000000000..e31bfe1af2
--- /dev/null
+++ b/keyboards/arrow_pad/keymaps/pad_24/Makefile
@@ -0,0 +1,17 @@
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = no  # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+
+CONFIG_H = keymaps/$(KEYMAP)/config.h
\ No newline at end of file
diff --git a/keyboards/arrow_pad/keymaps/pad_24/config.h b/keyboards/arrow_pad/keymaps/pad_24/config.h
new file mode 100644
index 0000000000..e940acaa0c
--- /dev/null
+++ b/keyboards/arrow_pad/keymaps/pad_24/config.h
@@ -0,0 +1,160 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x4096
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Nobody
+#define PRODUCT         Arrow Pad 24
+#define DESCRIPTION     24-Key QMK Assistant
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
+#define MATRIX_COL_PINS { B0, B1, B2, B3 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B7
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/arrow_pad/keymaps/pad_24/keymap.c b/keyboards/arrow_pad/keymaps/pad_24/keymap.c
new file mode 100644
index 0000000000..5647f75afe
--- /dev/null
+++ b/keyboards/arrow_pad/keymaps/pad_24/keymap.c
@@ -0,0 +1,163 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "arrow_pad.h"
+#include "led.h"
+
+// This is the 21-key keypad to 2x11 element matrix mapping
+#define KEYMAP( \
+    KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
+    KM_NUM, KM_FSL, KM_AST, KM_MIN, \
+    KM___7, KM___8, KM___9, KM_EQU, \
+    KM___4, KM___5, KM___6, KM_PLS, \
+    KM___1, KM___2, KM___3, ___ENT, \
+    KM___0, _____0, KM_DOT, KM_ENT  \
+) { \
+    { KM_ESC, KM_TAB, KM_BSL, KM_ARR  }, \
+    { KM_NUM, KM_FSL, KM_AST, KM_MIN  }, \
+    { KM___7, KM___8, KM___9, KM_EQU  }, \
+    { KM___4, KM___5, KM___6, KM_PLS  }, \
+    { KM___1, KM___2, KM___3, KC_NO   }, \
+    { KM___0, KC_NO,  KM_DOT, KM_ENT  }  \
+}
+
+#define LAYER_BASE                      0
+#define LAYER_EDIT                      1
+#define LAYER_FUNCTION                  2
+
+#define MACRO_COPY_CUT                  0
+#define MACRO_SHIFT_CONTROL             1
+#define MACRO_CONTROL_ALT               2