Merge remote-tracking branch 'upstream/master'

* upstream/master: (1239 commits)
  Update ez.c
  removes planck/rev3 temporarily
  Move hand_swap_config to ez.c, removes error for infinity
  Update Makefile
  ergodox: Update algernon's keymap to v1.9
  Added VS Code dir to .gitignore
  Support the Pegasus Hoof controller.
  [Jack & Erez] Simplifies and documents TO
  add readme
  use wait_ms instead of _delay_ms
  add messenger
  init keymap
  Add example keymap
  Adding whiskey_tango_foxtrot_capslock ergodox keymap
  Unicode map framework. Allow unicode up to 0xFFFFF using separate mapping table
  CIE 1931 dim curve
  Apply the dim curve to the RGB output
  Update the Cluecard readme files
  Tune snake and knight intervals for Cluecard
  Tunable RGB light intervals
  ...

11 files changed, 649 insertions, 0 deletions

diff --git a/keyboards/amj60/Makefile b/keyboards/amj60/Makefile
new file mode 100644
index 0000000000..4e2a6f00fd
--- /dev/null
+++ b/keyboards/amj60/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/amj60/amj60.c b/keyboards/amj60/amj60.c
new file mode 100644
index 0000000000..993a5917db
--- /dev/null
+++ b/keyboards/amj60/amj60.c
@@ -0,0 +1,30 @@
+#include "amj60.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB |= (1<<2);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTB &= ~(1<<2);
+    } else {
+        // Turn capslock off
+        PORTB |= (1<<2);
+    }
+}
diff --git a/keyboards/amj60/amj60.h b/keyboards/amj60/amj60.h
new file mode 100644
index 0000000000..a0cb473310
--- /dev/null
+++ b/keyboards/amj60/amj60.h
@@ -0,0 +1,153 @@
+#ifndef AMJ60_H
+#define AMJ60_H
+
+#include "quantum.h"
+
+// readability  
+#define XXX KC_NO
+
+/* AMJ60 layout to the best of my knowledge matrix layout
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49|
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d    |
+   * |-----------------------------------------------------------|
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|  3c | 3d |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49,\
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
+}
+
+/* 
+   * ANSI
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c|   0d  |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d    |
+   * |-----------------------------------------------------------|
+   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|   3d     |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP_ANSI( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
+    {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
+}
+
+/* AMJ60 HHKB matrix layout
+   * ,------------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 |
+   * |------------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d  |
+   * |------------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b|   2d   |
+   * |------------------------------------------------------------|
+   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d   | 3c |
+   * |------------------------------------------------------------|
+   * | 40 | 41 | 42 |        45              | 4a | 4b | 4c | 4d  |
+   * `------------------------------------------------------------'
+ */
+
+#define KEYMAP_HHKB( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
+    {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
+}
+
+/* ISO 
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
+   * |-----------------------------------------------------------|
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|   3d     |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP_ISO( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
+}
+/* ISO w/ split right shift key matrix layout
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
+   * |-----------------------------------------------------------|
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d  | 3c |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP_ISO_SPLITRSHIFT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
diff --git a/keyboards/amj60/config.h b/keyboards/amj60/config.h
new file mode 100644
index 0000000000..d98e0e9f2f
--- /dev/null
+++ b/keyboards/amj60/config.h
@@ -0,0 +1,94 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6066
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Han Chen
+#define PRODUCT         AMJ60
+#define DESCRIPTION     qmk port of AMJ60 PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5}
+#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7, D6, B3}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+/* Underlight configuration
+ */
+
+#define RGB_DI_PIN E2
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 8     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/Makefile b/keyboards/amj60/keymaps/iso_split_rshift/Makefile
new file mode 100644
index 0000000000..2969ed8aec
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/Makefile
@@ -0,0 +1,23 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/build.sh b/keyboards/amj60/keymaps/iso_split_rshift/build.sh
new file mode 100755
index 0000000000..6b4b4568f5
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/build.sh
@@ -0,0 +1,42 @@
+#!/bin/bash
+# adjust for cpu 
+# -j 16 gave best result on a hyperthreaded quad core core i7
+
+LIMIT=10
+THREADS="-j 16"
+KMAP=iso_split_rshift
+
+echo "We need sudo later"
+sudo ls 2>&1 /dev/null
+
+function wait_bootloader {
+	echo "Waiting for Bootloader..."
+	local STARTTIME=$(date +"%s")
+	local REMIND=0
+    local EXEC=dfu-programmer
+    local TARGET=atmega32u4
+	while true
+	do
+		sudo $EXEC $TARGET get > /dev/null 2>&1
+		[ $? -eq 0 ] && break
+		ENDTIME=$(date +"%s")
+		DURATION=$(($ENDTIME-$STARTTIME))
+		if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ]
+		then 
+			echo "Did you forget to press the reset button?"
+			REMIND=1
+		fi
+        sleep 1
+	done
+}
+make clean
+make KEYMAP=${KMAP} ${THREADS}
+if [[ $? -eq 0 ]]
+then
+    echo "please trigger flashing!"
+    wait_bootloader
+    sudo make KEYMAP=${KMAP} dfu ${THREADS}
+else
+    echo "make failed"
+    exit 77
+fi
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/keymap.c b/keyboards/amj60/keymaps/iso_split_rshift/keymap.c
new file mode 100644
index 0000000000..60fb0bfb0b
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/keymap.c
@@ -0,0 +1,147 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "amj60.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _DEF 0
+#define _SPC 1
+#define _TAB 2
+#define _SFX 3
+
+// dual-role shortcuts
+#define TABDUAL   LT(_TAB, KC_TAB)
+#define CAPSDUAL  CTL_T(KC_ESC)
+#define SPACEDUAL LT(_SPC, KC_SPACE)
+#define ENTERDUAL CTL_T(KC_ENT)
+// arrow cluster duality bottom right corner
+#define ARRLEFT  ALT_T(KC_LEFT)
+#define ARRDOWN  GUI_T(KC_DOWN)
+#define ARRUP    SFT_T(KC_UP)
+#define ARRRIGHT CTL_T(KC_RIGHT)
+// german brackets
+#define GER_CUR_L RALT(KC_7)    // [
+#define GER_CUR_R RALT(KC_0)    // ]
+#define GER_PAR_L LSFT(KC_8)    // (
+#define GER_PAR_R LSFT(KC_9)    // )
+#define GER_ANG_L KC_NUBS       // <
+#define GER_ANG_R LSFT(KC_NUBS) // >
+#define GER_BRC_L RALT(KC_8)    // [
+#define GER_BRC_R RALT(KC_9)    // ]
+
+// increase readability 
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Keymap _DEF: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Grv|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   \ | Tab is Fn1
+     * |-----------------------------------------------------------|
+     * |Ctrl   | A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| Return |
+     * |-----------------------------------------------------------|
+     * |Sft | < |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn2| RShift is UP
+     * |-----------------------------------------------------------|
+     * |Ctrl|Win |Alt |      Space/Fn0         |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is 
+     * `-----------------------------------------------------------'   LEFT DWN RIGHT
+     */
+    [_DEF] = KEYMAP_ISO_SPLITRSHIFT(
+        KC_GRV,   KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,   \
+        TABDUAL,  KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,   \
+        CAPSDUAL, KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,  ENTERDUAL, \
+        KC_LSFT,  KC_NUBS, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, ARRUP,    TG(_SFX),  \
+        KC_LCTL,  KC_LGUI, KC_LALT,             SPACEDUAL,                       KC_RALT, ARRLEFT, ARRDOWN,  ARRRIGHT),
+
+    /* Keymap 1: F-and-vim Layer, modified with Space (by holding space)
+     * ,-----------------------------------------------------------.
+     * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete|
+     * |-----------------------------------------------------------|
+     * |    |Paus| Up| [ | ] |   |   |   | ( | ) |   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |      |Lft|Dwn|Rgt|   |   |Left|Down|Right|Up|  |   | PLAY |
+     * |-----------------------------------------------------------|
+     * |    |   |   |   | < | > |   |M0 |   |   |   |   | Vol+ |   |
+     * |-----------------------------------------------------------|
+     * |    |    |    |                        |Alt |Prev|Vol-|Next|
+     * `-----------------------------------------------------------'
+     */
+    [_SPC] = KEYMAP_ISO_SPLITRSHIFT(
+        KC_PSCR, KC_F1,   KC_F2,   KC_F3,     KC_F4,     KC_F5,     KC_F6,    KC_F7,     KC_F8,     KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
+        _______, KC_PAUS, KC_UP,   GER_BRC_L, GER_BRC_R, _______,   _______,  GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \
+        _______, KC_LEFT, KC_DOWN, KC_RIGHT,  _______,   _______,   KC_LEFT,  KC_DOWN,   KC_UP,     KC_RGHT, _______, _______, _______, KC_MPLY, \
+        _______, _______, _______, _______,   GER_ANG_L, GER_ANG_R, KC_SPACE, M(0),      _______,   _______, _______, _______, KC_VOLU, _______, \
+        _______, _______, _______,                                  _______,                                 _______, KC_MPRV, KC_VOLD, KC_MNXT),
+
+    /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab)
+     * ,-----------------------------------------------------------.
+     * |WAKE|   |   |   |   |   |   |   |   |   |   |   |   |Insert|  TAB+GRC = WAKE
+     * |-----------------------------------------------------------|
+     * |     |   |   |   |   |   |   |   | { | } |   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |      |   |   |   |   |   |Pos1|PgDn|PgUp|End|  |   |Retrn |
+     * |-----------------------------------------------------------|
+     * |    |   |   |   |   |   |   |AF2|   |   |   |   | PgUp |   |
+     * |-----------------------------------------------------------|
+     * |    |    |    |                        |Alt |Pos1|PgDn|End |
+     * `-----------------------------------------------------------'
+     */
+    [_TAB] = KEYMAP_ISO_SPLITRSHIFT(
+        KC_WAKE, _______, _______, _______, _______, _______, _______, _______,    _______,  _______, _______, _______, _______, KC_INS,  \
+        _______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN,    KC_PGUP,  KC_END,  _______, _______, _______, KC_ENT,  \
+        _______, _______, _______, _______, _______, _______, _______, M(1),       _______,  _______, _______, _______, KC_PGUP, _______, \
+        _______, _______, _______,                            _______,                                _______, KC_HOME, KC_PGDN, KC_END),
+
+    /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key)
+     * ,-----------------------------------------------------------.
+     * |RSET|  |   |   |   |   |   |  7|  8|  9|   |   |   |Backsp |
+     * |-----------------------------------------------------------|
+     * |     |   |   |   |   |   |   | 4 | 5 | 6 |   |   |   |   \ |
+     * |-----------------------------------------------------------|
+     * |      | L | L |   |   |   |   | 1 | 2 | 3 |   |   | Return |
+     * |-----------------------------------------------------------|
+     * |    |   | L | L | L | L | L | L |   | 0 |   |  /|  Up  |   | All "L"s represent
+     * |-----------------------------------------------------------| LED controlling
+     * |Ctrl|Win |Alt |                        |Alt |Left|Down|Right|
+     * `-----------------------------------------------------------'
+     */
+    [_SFX] = KEYMAP_ISO_SPLITRSHIFT(
+        RESET,   _______, _______, _______, _______, _______, _______, KC_7,    KC_8,    KC_9, _______, _______, _______, KC_BSPC, \
+        _______, _______, _______, _______, _______, _______, _______, KC_4,    KC_5,    KC_6, _______, _______, _______, KC_BSLS, \
+        _______, F(2),    F(3),    _______, _______, _______, _______, KC_1,    KC_2,    KC_3, _______, _______, XXXXXXX, KC_ENT,  \
+        _______, F(4),    F(5),    F(6),    F(7),    F(8),    F(9),    _______, _______, KC_0, _______, KC_SLSH, KC_UP,   _______, \
+        _______, _______, _______,                            _______,                         _______, KC_LEFT, KC_DOWN, KC_RGHT),
+};
+
+enum function_id {
+    LAUNCH,
+    RGBLED_TOGGLE,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1]  = ACTION_FUNCTION(LAUNCH),
+    [10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    // MACRODOWN only works in this function
+    switch(id) {
+        case 0:
+            return (record->event.pressed ? 
+                    MACRO( D(RALT), T(SPC), U(RALT), END )
+                    :MACRO( END ));
+            break;
+        case 1:
+            return (record->event.pressed ? 
+                    MACRO( D(LALT), T(F2), U(LALT), END )
+                    :MACRO( END ));
+            break;
+    }
+    return MACRO_NONE;
+};
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/readme.md b/keyboards/amj60/keymaps/iso_split_rshift/readme.md
new file mode 100644
index 0000000000..2113d93e4d
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/readme.md
@@ -0,0 +1,30 @@
+toneman77's custom spacefn Layout
+=====================
+
+##Quantum MK Firmware
+For the full Quantum feature list, see the parent readme.md.
+
+# Features
+* heavily modified ISO (!) layout with split right shift key
+* spaceFn
+* Dual-Role keys:
+* 
+ | Original key     | when tapped   | when held     |
+ | ---------------- | ------------- | ------------- |
+ | Space            | Space         | layer change  |
+ | Caps lock        | Escape        | Control       |
+ | Tab              | Tab           | layer change  |
+ | Enter            | Enter         | Control       |
+
+* vim-style arrow keys on hjkl (spacefn layer)
+* corresponding Home/PgDn/PgUp/End on hjkl (tab layer)
+* bonus arrow keys in the bottom right corner on Alt/Win/Menu/rCtrl/Shift
+* more bonus arrow keys on wasd (spacefn layer)
+* media keys prev/next/play/vol+/vol- (spacefn layer)
+* firmware bootloader button
+* additional brackets that only work in german layout due to horrible placement
+in the default qwertz layout
+
+
+### Additional Credits
+* visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) (without the LED keys)
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh b/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh
new file mode 100755
index 0000000000..da5457e195
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh
@@ -0,0 +1,4 @@
+#!/bin/bash
+git checkout amj60      # gets you on branch amj60
+git fetch origin        # gets you up to date with origin
+git merge origin/master
diff --git a/keyboards/amj60/readme.md b/keyboards/amj60/readme.md
new file mode 100644
index 0000000000..0896134e0c
--- /dev/null
+++ b/keyboards/amj60/readme.md
@@ -0,0 +1,57 @@
+AMJ60 keyboard firmware
+======================
+DIY/Assembled compact 60% keyboard.
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/amj60
+folder. Once your dev env is setup, you'll be able to type `make` to generate
+your .hex - you can then use `make dfu` to program your PCB once you hit the
+reset button. 
+
+Depending on which keymap you would like to use, you will have to compile
+slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to
+define your favorite layout yourself. To define your own keymap create file
+named `<name>.c` in the keymaps folder, and see keymap document (you can find
+in top readme.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with
+`KEYMAP` option like:
+``
+$ make KEYMAP=[default|jack|<name>]
+``
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps`
+folder.
+
+## Variations
+KEYMAP macros for the following layouts are available:
+
+* default, for all the available, possible keys
+* ANSI, for 60% ANSI keyboard
+* ISO
+* ISO w/ split right shift key
+* HHKB
+
+Remark: all but "ISO w/ split right shift key" are untested and were done to the best of my knowledge.
+
+### Original tmk firmware
+The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ60).
+
+## Further information
+Since information and documentation for this board are sparse, (at least for non-chinese speaking ppl) here is everything that could be found
+
+* [geekhack discussion](https://geekhack.org/index.php?topic=53070.0)
+* [chinese discussion](https://www.v2ex.com/t/161887)
+* Board has [dedicated pinouts](https://i.imgur.com/D0sWhyh.jpg?1) for a bluetooth module
+* has pins for external power [picture](https://i.imgur.com/00VrtIp.jpg?1).
+* most information comes from [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/32oonr/gh60_pcb_for_your_custom_keyboard/)
diff --git a/keyboards/amj60/rules.mk b/keyboards/amj60/rules.mk
new file mode 100644
index 0000000000..18403ac328
--- /dev/null
+++ b/keyboards/amj60/rules.mk
@@ -0,0 +1,66 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  ?= no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE   ?= yes # Console for debug(+400)
+COMMAND_ENABLE   ?= yes # Commands for debug and configuration
+NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE  ?= yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE      ?= no  # MIDI controls
+AUDIO_ENABLE     ?= no
+UNICODE_ENABLE   ?= no  # Unicode
+BLUETOOTH_ENABLE ?= no  # Enable Bluetooth with the Adafruit EZ-Key HID