Merge remote-tracking branch 'upstream/develop'

9 files changed, 32 insertions, 133 deletions

diff --git a/keyboards/alf/dc60/config.h b/keyboards/alf/dc60/config.h
index e9bfd4c5db..e81b6a2010 100644
--- a/keyboards/alf/dc60/config.h
+++ b/keyboards/alf/dc60/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
 
 /*
  * Keyboard Matrix Assignments
@@ -39,13 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-#define LED_CAPS_LOCK_PIN B7
-#define LED_PIN_ON_STATE 0
-
-#define BACKLIGHT_PIN B6
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 5
-
 #define RGB_DI_PIN E6
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING
@@ -64,45 +52,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_VAL_STEP 8
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/alf/dc60/info.json b/keyboards/alf/dc60/info.json
index 81b8613e5b..faf199d8a0 100644
--- a/keyboards/alf/dc60/info.json
+++ b/keyboards/alf/dc60/info.json
@@ -7,6 +7,17 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "pin": "B6",
+        "levels": 5,
+        "breathing": true
+    },
+    "indicators": {
+        "caps_lock": "B7",
+        "on_state": 0
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}]
diff --git a/keyboards/alf/dc60/rules.mk b/keyboards/alf/dc60/rules.mk
index 8434db38dd..16be45209b 100644
--- a/keyboards/alf/dc60/rules.mk
+++ b/keyboards/alf/dc60/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/alf/x11/config.h b/keyboards/alf/x11/config.h
index e7fc2a6911..04ebe0c657 100644
--- a/keyboards/alf/x11/config.h
+++ b/keyboards/alf/x11/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 7
-#define MATRIX_COLS 13
 
 /*
  * Keyboard Matrix Assignments
@@ -39,15 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-#define LED_NUM_LOCK_PIN E6
-#define LED_CAPS_LOCK_PIN C6
-#define LED_SCROLL_LOCK_PIN C7
-#define LED_PIN_ON_STATE 0
-
-#define BACKLIGHT_PIN B7
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 3
-
 #define RGB_DI_PIN F7
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 28
@@ -68,45 +54,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_TWINKLE
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -122,7 +74,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/alf/x11/info.json b/keyboards/alf/x11/info.json
index eb78204fc7..8b3ae6f2ba 100644
--- a/keyboards/alf/x11/info.json
+++ b/keyboards/alf/x11/info.json
@@ -8,6 +8,18 @@
     "pid": "0x0001",
     "device_version": "0.0.1"
   },
+  "backlight": {
+    "pin": "B7",
+    "breathing": true
+  },
+  "indicators": {
+    "caps_lock": "C6",
+    "num_lock": "E6",
+    "scroll_lock": "C7",
+    "on_state": 0
+  },
+  "processor": "atmega32u4",
+  "bootloader": "atmel-dfu",
   "layouts": {
     "LAYOUT": {
       "layout": [
diff --git a/keyboards/alf/x11/rules.mk b/keyboards/alf/x11/rules.mk
index d1f8584cb9..2eed748d1f 100644
--- a/keyboards/alf/x11/rules.mk
+++ b/keyboards/alf/x11/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/alf/x2/config.h b/keyboards/alf/x2/config.h
index dc1ebcb539..374873d5d5 100644
--- a/keyboards/alf/x2/config.h
+++ b/keyboards/alf/x2/config.h
@@ -16,11 +16,6 @@
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS  5
-#define MATRIX_COLS  15
 
 /* key matrix pins */
 #define MATRIX_ROW_PINS \
@@ -31,18 +26,6 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION   COL2ROW
 
-#define LED_CAPS_LOCK_PIN B2
-#define LED_PIN_ON_STATE  0
-
-/* number of backlight levels */
-#define BACKLIGHT_PIN     B6
-#ifdef BACKLIGHT_PIN
-#    define BACKLIGHT_LEVELS 3
-#endif
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 
diff --git a/keyboards/alf/x2/info.json b/keyboards/alf/x2/info.json
index 7bb69d15e6..5e0b3087a8 100644
--- a/keyboards/alf/x2/info.json
+++ b/keyboards/alf/x2/info.json
@@ -8,6 +8,15 @@
         "pid": "0x6060",
         "device_version": "0.0.1"
     },
+    "indicators": {
+        "caps_lock": "B2",
+        "on_state": 0
+    },
+    "backlight": {
+        "pin": "B6"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [
diff --git a/keyboards/alf/x2/rules.mk b/keyboards/alf/x2/rules.mk
index b27013f863..3d5cb57ad5 100644
--- a/keyboards/alf/x2/rules.mk
+++ b/keyboards/alf/x2/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #