Adding Zodiark Split keyboard (#11837)

* Adding Files for Zodiark

* zodiark.h and keymap.c layout corrections

* Apply suggestions from code review

Applied all suggestions from zvecr.

Co-authored-by: Joel Challis <git@zvecr.com>

* Applied all suggestions from fauxpark

Co-authored-by: Ryan <fauxpark@gmail.com>

* Defined matrix driver

* Update keymap with GPL2

* Added GPL2+ to All keymap.c, cleaned up config.h, and removed the rgbmatrixwip keymap

* Apply suggestions from code review

Removed the two lines from the config.h and changed to the smaller resolution picture on the Readme.

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>

* Added VIA keymap

* Corrected VIA Keymap oled.c

Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>

1 files changed, 75 insertions, 0 deletions

diff --git a/keyboards/aleblazer/zodiark/config.h b/keyboards/aleblazer/zodiark/config.h
new file mode 100644
index 0000000000..84795f024b
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/config.h
@@ -0,0 +1,75 @@
+/*
+Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xF901
+#define PRODUCT_ID      0xF902
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Aleblazer
+#define PRODUCT         Zodiark
+
+#define NO_ACTION_MACRO
+
+#define SOFT_SERIAL_PIN D3
+#define SERIAL_USE_MULTI_TRANSACTION
+#define SELECT_SOFT_SERIAL_SPEED 1
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 7
+#define DIODE_DIRECTION COL2ROW
+
+#define ENCODERS_PAD_A { D2 }
+#define ENCODERS_PAD_B { D4 }
+#define ENCODERS_PAD_A_RIGHT { D4 }
+#define ENCODERS_PAD_B_RIGHT { D2 }
+#define ENCODER_RESOLUTION 3
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C6, D7, E6, B4, F4 }
+#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+#define RGB_DI_PIN B5
+
+#ifdef RGBLIGHT_ENABLE
+#define RGBLED_NUM 68
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 34, 34 }
+#define RGBLIGHT_LIMIT_VAL 170
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#ifdef RGB_MATRIX_ENABLE
+#define DRIVER_LED_TOTAL 68
+#define RGB_MATRIX_SPLIT { 34, 34 }
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_HUE_STEP 8
+#define RGB_MATRIX_SAT_STEP 8
+#define RGB_MATRIX_VAL_STEP 8
+#define RGB_MATRIX_SPD_STEP 10
+#endif