[Keyboard] Add akegata denki device one (#9690)

* add device one

* fix layouts

* add other layouts

* column fixes, device id changes

* layouts cleanup, add readme

* add info.json, fix readme

* add template readme

* add smaller image

* fix image links, address requested changes

* Apply suggestions from code review

* Update keyboards/device_one/keymaps/ansi_split_backspace/keymap.c

* add akegata vendor folder

* Apply suggestions from code review

16 files changed, 2852 insertions, 0 deletions

diff --git a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.c b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.c
new file mode 100644
index 0000000000..8e0303523a
--- /dev/null
+++ b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.c
@@ -0,0 +1,263 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+        http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+#include "stm32_gpio.h"
+
+/*===========================================================================*/
+/* Driver local definitions.                                                 */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables.                                                */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types.                                         */
+/*===========================================================================*/
+
+/**
+ * @brief   Type of STM32 GPIO port setup.
+ */
+typedef struct {
+  uint32_t              moder;
+  uint32_t              otyper;
+  uint32_t              ospeedr;
+  uint32_t              pupdr;
+  uint32_t              odr;
+  uint32_t              afrl;
+  uint32_t              afrh;
+} gpio_setup_t;
+
+/**
+ * @brief   Type of STM32 GPIO initialization data.
+ */
+typedef struct {
+#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
+  gpio_setup_t          PAData;
+#endif
+#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
+  gpio_setup_t          PBData;
+#endif
+#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
+  gpio_setup_t          PCData;
+#endif
+#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
+  gpio_setup_t          PDData;
+#endif
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+  gpio_setup_t          PEData;
+#endif
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+  gpio_setup_t          PFData;
+#endif
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+  gpio_setup_t          PGData;
+#endif
+#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
+  gpio_setup_t          PHData;
+#endif
+#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
+  gpio_setup_t          PIData;
+#endif
+#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
+  gpio_setup_t          PJData;
+#endif
+#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
+  gpio_setup_t          PKData;
+#endif
+} gpio_config_t;
+
+/**
+ * @brief   STM32 GPIO static initialization data.
+ */
+static const gpio_config_t gpio_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH},
+#endif
+#if STM32_HAS_GPIOJ
+  {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
+   VAL_GPIOJ_ODR,   VAL_GPIOJ_AFRL,   VAL_GPIOJ_AFRH},
+#endif
+#if STM32_HAS_GPIOK
+  {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
+   VAL_GPIOK_ODR,   VAL_GPIOK_AFRL,   VAL_GPIOK_AFRH}
+#endif
+};
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+
+static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
+
+  gpiop->OTYPER  = config->otyper;
+  gpiop->OSPEEDR = config->ospeedr;
+  gpiop->PUPDR   = config->pupdr;
+  gpiop->ODR     = config->odr;
+  gpiop->AFRL    = config->afrl;
+  gpiop->AFRH    = config->afrh;
+  gpiop->MODER   = config->moder;
+}
+
+static void stm32_gpio_init(void) {
+
+  /* Enabling GPIO-related clocks, the mask comes from the
+     registry header file.*/
+  rccResetAHB(STM32_GPIO_EN_MASK);
+  rccEnableAHB(STM32_GPIO_EN_MASK, true);
+
+  /* Initializing all the defined GPIO ports.*/
+#if STM32_HAS_GPIOA
+  gpio_init(GPIOA, &gpio_default_config.PAData);
+#endif
+#if STM32_HAS_GPIOB
+  gpio_init(GPIOB, &gpio_default_config.PBData);
+#endif
+#if STM32_HAS_GPIOC
+  gpio_init(GPIOC, &gpio_default_config.PCData);
+#endif
+#if STM32_HAS_GPIOD
+  gpio_init(GPIOD, &gpio_default_config.PDData);
+#endif
+#if STM32_HAS_GPIOE
+  gpio_init(GPIOE, &gpio_default_config.PEData);
+#endif
+#if STM32_HAS_GPIOF
+  gpio_init(GPIOF, &gpio_default_config.PFData);
+#endif
+#if STM32_HAS_GPIOG
+  gpio_init(GPIOG, &gpio_default_config.PGData);
+#endif
+#if STM32_HAS_GPIOH
+  gpio_init(GPIOH, &gpio_default_config.PHData);
+#endif
+#if STM32_HAS_GPIOI
+  gpio_init(GPIOI, &gpio_default_config.PIData);
+#endif
+#if STM32_HAS_GPIOJ
+  gpio_init(GPIOJ, &gpio_default_config.PJData);
+#endif
+#if STM32_HAS_GPIOK
+  gpio_init(GPIOK, &gpio_default_config.PKData);
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers.                                                */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions.                                                */
+/*===========================================================================*/
+
+/**
+ * @brief   Early initialization code.
+ * @details GPIO ports and system clocks are initialized before everything
+ *          else.
+ */
+void __early_init(void) {
+
+  stm32_gpio_init();
+  stm32_clock_init();
+}
+
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief   SDC card detection.
+ */
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   SDC card write protection detection.
+ */
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif /* HAL_USE_SDC */
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+
+}
diff --git a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.h b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.h
new file mode 100644
index 0000000000..3c4f3f2e82
--- /dev/null
+++ b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.h
@@ -0,0 +1,950 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+        http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*===========================================================================*/
+/* Driver constants.                                                         */
+/*===========================================================================*/
+
+/*
+ * Setup for STMicroelectronics STM32 Nucleo32-F042K6 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_ST_NUCLEO32_F042K6
+#define BOARD_NAME                  "STMicroelectronics STM32 Nucleo32-F042K6"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: LSE not fitted.
+ * NOTE: HSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK                0U
+#endif
+
+#define STM32_LSEDRV                (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK                0U
+#endif
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F042x6
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_ARD_A0                0U
+#define GPIOA_ARD_A1                1U
+#define GPIOA_VCP_TX                2U
+#define GPIOA_ARD_A2                3U
+#define GPIOA_ARD_A3                4U
+#define GPIOA_ARD_A4                5U
+#define GPIOA_ARD_A5                6U
+#define GPIOA_ARD_A6                7U
+#define GPIOA_ARD_D9                8U
+#define GPIOA_ARD_D1                9U
+#define GPIOA_ARD_D0                10U
+#define GPIOA_ARD_D10               11U
+#define GPIOA_ARD_D2                12U
+#define GPIOA_SWDIO                 13U
+#define GPIOA_SWCLK                 14U
+#define GPIOA_VCP_RX                15U
+
+#define GPIOB_ARD_D3                0U
+#define GPIOB_ARD_D6                1U
+#define GPIOB_PIN2                  2U
+#define GPIOB_ARD_D13               3U
+#define GPIOB_LED_GREEN             3U
+#define GPIOB_ARD_D12               4U
+#define GPIOB_ARD_D11               5U
+#define GPIOB_ARD_D5                6U
+#define GPIOB_ARD_A5_ALT            6U
+#define GPIOB_ARD_D4                7U
+#define GPIOB_ARD_A4_ALT            7U
+#define GPIOB_PIN8                  8U
+#define GPIOB_PIN9                  9U
+#define GPIOB_PIN10                 10U
+#define GPIOB_PIN11                 11U
+#define GPIOB_PIN12                 12U
+#define GPIOB_PIN13                 13U
+#define GPIOB_PIN14                 14U
+#define GPIOB_PIN15                 15U
+
+#define GPIOC_PIN0                  0U
+#define GPIOC_PIN1                  1U
+#define GPIOC_PIN2                  2U
+#define GPIOC_PIN3                  3U
+#define GPIOC_PIN4                  4U
+#define GPIOC_PIN5                  5U
+#define GPIOC_PIN6                  6U
+#define GPIOC_PIN7                  7U
+#define GPIOC_PIN8                  8U
+#define GPIOC_PIN9                  9U
+#define GPIOC_PIN10                 10U
+#define GPIOC_PIN11                 11U
+#define GPIOC_PIN12                 12U
+#define GPIOC_PIN13                 13U
+#define GPIOC_PIN14                 14U
+#define GPIOC_PIN15                 15U
+
+#define GPIOD_PIN0                  0U
+#define GPIOD_PIN1                  1U
+#define GPIOD_PIN2                  2U
+#define GPIOD_PIN3                  3U
+#define GPIOD_PIN4                  4U
+#define GPIOD_PIN5                  5U
+#define GPIOD_PIN6                  6U
+#define GPIOD_PIN7                  7U
+#define GPIOD_PIN8                  8U
+#define GPIOD_PIN9                  9U
+#define GPIOD_PIN10                 10U
+#define GPIOD_PIN11                 11U
+#define GPIOD_PIN12                 12U
+#define GPIOD_PIN13                 13U
+#define GPIOD_PIN14                 14U
+#define GPIOD_PIN15                 15U
+
+#define GPIOE_PIN0                  0U
+#define GPIOE_PIN1                  1U
+#define GPIOE_PIN2                  2U
+#define GPIOE_PIN3                  3U
+#define GPIOE_PIN4                  4U
+#define GPIOE_PIN5                  5U
+#define GPIOE_PIN6                  6U
+#define GPIOE_PIN7                  7U
+#define GPIOE_PIN8                  8U
+#define GPIOE_PIN9                  9U
+#define GPIOE_PIN10                 10U
+#define GPIOE_PIN11                 11U
+#define GPIOE_PIN12                 12U
+#define GPIOE_PIN13                 13U
+#define GPIOE_PIN14                 14U
+#define GPIOE_PIN15                 15U
+
+#define GPIOF_ARD_D7                0U
+#define GPIOF_ARD_D8                1U
+#define GPIOF_PIN2                  2U
+#define GPIOF_PIN3                  3U
+#define GPIOF_PIN4                  4U
+#define GPIOF_PIN5                  5U
+#define GPIOF_PIN6                  6U
+#define GPIOF_PIN7                  7U
+#define GPIOF_PIN8                  8U
+#define GPIOF_PIN9                  9U
+#define GPIOF_PIN10                 10U
+#define GPIOF_PIN11                 11U
+#define GPIOF_PIN12                 12U
+#define GPIOF_PIN13                 13U
+#define GPIOF_PIN14                 14U
+#define GPIOF_PIN15                 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_ARD_A0                 PAL_LINE(GPIOA, 0U)
+#define LINE_ARD_A1                 PAL_LINE(GPIOA, 1U)
+#define LINE_VCP_TX                 PAL_LINE(GPIOA, 2U)
+#define LINE_ARD_A2                 PAL_LINE(GPIOA, 3U)
+#define LINE_ARD_A3                 PAL_LINE(GPIOA, 4U)
+#define LINE_ARD_A4                 PAL_LINE(GPIOA, 5U)
+#define LINE_ARD_A5                 PAL_LINE(GPIOA, 6U)
+#define LINE_ARD_A6                 PAL_LINE(GPIOA, 7U)
+#define LINE_ARD_D9                 PAL_LINE(GPIOA, 8U)
+#define LINE_ARD_D1                 PAL_LINE(GPIOA, 9U)
+#define LINE_ARD_D0                 PAL_LINE(GPIOA, 10U)
+#define LINE_ARD_D10                PAL_LINE(GPIOA, 11U)
+#define LINE_ARD_D2                 PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
+#define LINE_VCP_RX                 PAL_LINE(GPIOA, 15U)
+#define LINE_ARD_D3                 PAL_LINE(GPIOB, 0U)
+#define LINE_ARD_D6                 PAL_LINE(GPIOB, 1U)
+#define LINE_ARD_D13                PAL_LINE(GPIOB, 3U)
+#define LINE_LED_GREEN              PAL_LINE(GPIOB, 3U)
+#define LINE_ARD_D12                PAL_LINE(GPIOB, 4U)
+#define LINE_ARD_D11                PAL_LINE(GPIOB, 5U)
+#define LINE_ARD_D5                 PAL_LINE(GPIOB, 6U)
+#define LINE_ARD_A5_ALT             PAL_LINE(GPIOB, 6U)
+#define LINE_ARD_D4                 PAL_LINE(GPIOB, 7U)
+#define LINE_ARD_A4_ALT             PAL_LINE(GPIOB, 7U)
+#define LINE_ARD_D7                 PAL_LINE(GPIOF, 0U)
+#define LINE_ARD_D8                 PAL_LINE(GPIOF, 1U)
+
+/*===========================================================================*/
+/* Driver pre-compile time settings.                                         */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks.                                       */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types.                                         */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros.                                                            */
+/*===========================================================================*/
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n)              (0U << (n))
+#define PIN_ODR_HIGH(n)             (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
+#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0  - ARD_A0                    (input pullup).
+ * PA1  - ARD_A1                    (input pullup).
+ * PA2  - VCP_TX                    (alternate 1).
+ * PA3  - ARD_A2                    (input pullup).
+ * PA4  - ARD_A3                    (input pullup).
+ * PA5  - ARD_A4                    (input pullup).
+ * PA6  - ARD_A5                    (input pullup).
+ * PA7  - ARD_A6                    (input pullup).
+ * PA8  - ARD_D9                    (input pullup).
+ * PA9  - ARD_D1                    (input pullup).
+ * PA10 - ARD_D0                    (input pullup).
+ * PA11 - ARD_D10                   (input pullup).
+ * PA12 - ARD_D2                    (input pullup).
+ * PA13 - SWDIO                     (alternate 0).
+ * PA14 - SWCLK                     (alternate 0).
+ * PA15 - VCP_RX                    (alternate 1).
+ */
+#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_ARD_A0) |         \
+                                     PIN_MODE_INPUT(GPIOA_ARD_A1) |         \
+                                     PIN_MODE_ALTERNATE(GPIOA_VCP_TX) |     \
+                                     PIN_MODE_INPUT(GPIOA_ARD_A2) |         \
+                                     PIN_MODE_INPUT(GPIOA_ARD_A3) |         \
+                                     PIN_MODE_INPUT(GPIOA_ARD_A4) |         \
+                                     PIN_MODE_INPUT(GPIOA_ARD_A5) |         \
+                                     PIN_MODE_INPUT(GPIOA_ARD_A6) |         \
+                                     PIN_MODE_INPUT(GPIOA_ARD_D9) |         \
+                                     PIN_MODE_INPUT(GPIOA_ARD_D1) |         \
+                                     PIN_MODE_INPUT(GPIOA_ARD_D0) |         \
+                                     PIN_MODE_INPUT(GPIOA_ARD_D10) |        \
+                                     PIN_MODE_INPUT(GPIOA_ARD_D2) |         \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
+                                     PIN_MODE_ALTERNATE(GPIOA_VCP_RX))
+#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_ARD_A0) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_ARD_A1) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_VCP_TX) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_ARD_A2) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_ARD_A3) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_ARD_A4) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_ARD_A5) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_ARD_A6) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_ARD_D9) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_ARD_D1) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_ARD_D0) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_ARD_D10) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_ARD_D2) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_VCP_RX))
+#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_HIGH(GPIOA_ARD_A0) |        \
+                                     PIN_OSPEED_HIGH(GPIOA_ARD_A1) |        \
+                                     PIN_OSPEED_LOW(GPIOA_VCP_TX) |         \
+                                     PIN_OSPEED_LOW(GPIOA_ARD_A2) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_ARD_A3) |        \
+                                     PIN_OSPEED_LOW(GPIOA_ARD_A4) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_ARD_A5) |        \
+                                     PIN_OSPEED_HIGH(GPIOA_ARD_A6) |        \
+                                     PIN_OSPEED_HIGH(GPIOA_ARD_D9) |        \
+                                     PIN_OSPEED_HIGH(GPIOA_ARD_D1) |        \
+                                     PIN_OSPEED_HIGH(GPIOA_ARD_D0) |        \
+                                     PIN_OSPEED_HIGH(GPIOA_ARD_D10) |       \
+                                     PIN_OSPEED_HIGH(GPIOA_ARD_D2) |        \
+                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_VCP_RX))
+#define VAL_GPIOA_PUPDR             (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) |       \
+                                     PIN_PUPDR_PULLUP(GPIOA_ARD_A1) |       \
+                                     PIN_PUPDR_FLOATING(GPIOA_VCP_TX) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_ARD_A2) |       \
+                                     PIN_PUPDR_PULLUP(GPIOA_ARD_A3) |       \
+                                     PIN_PUPDR_PULLUP(GPIOA_ARD_A4) |       \
+                                     PIN_PUPDR_PULLUP(GPIOA_ARD_A5) |       \
+                                     PIN_PUPDR_PULLUP(GPIOA_ARD_A6) |       \
+                                     PIN_PUPDR_PULLUP(GPIOA_ARD_D9) |       \
+                                     PIN_PUPDR_PULLUP(GPIOA_ARD_D1) |       \
+                                     PIN_PUPDR_PULLUP(GPIOA_ARD_D0) |       \
+                                     PIN_PUPDR_PULLUP(GPIOA_ARD_D10) |      \
+                                     PIN_PUPDR_PULLUP(GPIOA_ARD_D2) |       \
+                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
+                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
+                                     PIN_PUPDR_FLOATING(GPIOA_VCP_RX))
+#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_ARD_A0) |           \
+                                     PIN_ODR_HIGH(GPIOA_ARD_A1) |           \
+                                     PIN_ODR_HIGH(GPIOA_VCP_TX) |           \
+                                     PIN_ODR_HIGH(GPIOA_ARD_A2) |           \
+                                     PIN_ODR_HIGH(GPIOA_ARD_A3) |           \
+                                     PIN_ODR_LOW(GPIOA_ARD_A4) |            \
+                                     PIN_ODR_HIGH(GPIOA_ARD_A5) |           \
+                                     PIN_ODR_HIGH(GPIOA_ARD_A6) |           \
+                                     PIN_ODR_HIGH(GPIOA_ARD_D9) |           \
+                                     PIN_ODR_HIGH(GPIOA_ARD_D1) |           \
+                                     PIN_ODR_HIGH(GPIOA_ARD_D0) |           \
+                                     PIN_ODR_HIGH(GPIOA_ARD_D10) |          \
+                                     PIN_ODR_HIGH(GPIOA_ARD_D2) |           \
+                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
+                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
+                                     PIN_ODR_HIGH(GPIOA_VCP_RX))
+#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_ARD_A0, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_ARD_A1, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_VCP_TX, 1U) |        \
+                                     PIN_AFIO_AF(GPIOA_ARD_A2, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_ARD_A3, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_ARD_A4, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_ARD_A5, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_ARD_A6, 0U))
+#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_ARD_D9, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_ARD_D1, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_ARD_D0, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_ARD_D10, 0U) |       \
+                                     PIN_AFIO_AF(GPIOA_ARD_D2, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_VCP_RX, 1U))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0  - ARD_D3                    (input pullup).
+ * PB1  - ARD_D6                    (input pullup).
+ * PB2  - PIN2                      (input pullup).
+ * PB3  - ARD_D13 LED_GREEN         (output pushpull maximum).
+ * PB4  - ARD_D12                   (input pullup).
+ * PB5  - ARD_D11                   (input pullup).
+ * PB6  - ARD_D5 ARD_A5_ALT         (input pullup).
+ * PB7  - ARD_D4 ARD_A4_ALT         (input pullup).
+ * PB8  - PIN8                      (input pullup).
+ * PB9  - PIN9                      (input pullup).
+ * PB10 - PIN10                     (input pullup).
+ * PB11 - PIN11                     (input pullup).
+ * PB12 - PIN12                     (input pullup).
+ * PB13 - PIN13                     (input pullup).
+ * PB14 - PIN14                     (input pullup).
+ * PB15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_ARD_D3) |         \
+                                     PIN_MODE_INPUT(GPIOB_ARD_D6) |         \
+                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
+                                     PIN_MODE_OUTPUT(GPIOB_ARD_D13) |       \
+                                     PIN_MODE_INPUT(GPIOB_ARD_D12) |        \
+                                     PIN_MODE_INPUT(GPIOB_ARD_D11) |        \
+                                     PIN_MODE_INPUT(GPIOB_ARD_D5) |         \
+                                     PIN_MODE_INPUT(GPIOB_ARD_D4) |         \
+                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN15))
+#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_ARD_D3) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_ARD_D6) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_ARD_D13) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_ARD_D12) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_ARD_D11) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_ARD_D5) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_ARD_D4) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
+#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_HIGH(GPIOB_ARD_D3) |        \
+                                     PIN_OSPEED_HIGH(GPIOB_ARD_D6) |        \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_ARD_D13) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_ARD_D12) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_ARD_D11) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_ARD_D5) |        \
+                                     PIN_OSPEED_HIGH(GPIOB_ARD_D4) |        \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN8) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN9) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN10) |         \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN11) |         \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN12) |         \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN13) |         \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN14) |         \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN15))
+#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_ARD_D3) |       \
+                                     PIN_PUPDR_PULLUP(GPIOB_ARD_D6) |       \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
+                                     PIN_PUPDR_FLOATING(GPIOB_ARD_D13) |    \
+                                     PIN_PUPDR_PULLUP(GPIOB_ARD_D12) |      \
+                                     PIN_PUPDR_PULLUP(GPIOB_ARD_D11) |      \
+                                     PIN_PUPDR_PULLUP(GPIOB_ARD_D5) |       \
+                                     PIN_PUPDR_PULLUP(GPIOB_ARD_D4) |       \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN15))
+#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_ARD_D3) |           \
+                                     PIN_ODR_HIGH(GPIOB_ARD_D6) |           \
+                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
+                                     PIN_ODR_LOW(GPIOB_ARD_D13) |           \
+                                     PIN_ODR_HIGH(GPIOB_ARD_D12) |          \
+                                     PIN_ODR_HIGH(GPIOB_ARD_D11) |          \
+                                     PIN_ODR_HIGH(GPIOB_ARD_D5) |           \
+                                     PIN_ODR_HIGH(GPIOB_ARD_D4) |           \
+                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN15))
+#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_ARD_D3, 0U) |        \
+                                     PIN_AFIO_AF(GPIOB_ARD_D6, 0U) |        \
+                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_ARD_D13, 0U) |       \
+                                     PIN_AFIO_AF(GPIOB_ARD_D12, 0U) |       \
+                                     PIN_AFIO_AF(GPIOB_ARD_D11, 0U) |       \
+                                     PIN_AFIO_AF(GPIOB_ARD_D5, 0U) |        \
+                                     PIN_AFIO_AF(GPIOB_ARD_D4, 0U))
+#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN15, 0U))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0  - PIN0