relocate 40percent.club boards to new parent folder (#4380)

* Initial move of 40percent.club boards to common parent folder.

* Refactor readme files to be consistent

* Refactor readme files to be consistent - fix make command examples.

* Refactor readme files to be consistent - align readme filenames.

* Refactor readme files to be consistent - fix repo url.

* Disable Community keymap builds as they are currently failing due to missing functionality

* Move more of 40percent.club boards to common parent folder.

* Refactor readme files to be consistent - align readme filenames.

* Refactor readme files to be consistent - fix make command examples.

18 files changed, 922 insertions, 0 deletions

diff --git a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/README.md b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/README.md
new file mode 100644
index 0000000000..3c9a5e98b3
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/README.md
@@ -0,0 +1,11 @@
+# Gherkin Layout
+This is my gherkin layout.
+It is used as a game pad, and key layout is inspired by spare keys I had lying around.
+The firmware is very simple, and only includes one layer keymap, and RGB effects.
+
+# Flashing
+The following command should be used from the main qmk directory.
+```
+make gherkin:bbaserdem
+sudo avrdude -p atmgea34u4 -P `ls /dev/ttyACM*` -c avr109 -U flash:.build/gherkin_bbaserdem.hex
+```
diff --git a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/config.h b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/config.h
new file mode 100644
index 0000000000..37d7113e78
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/config.h
@@ -0,0 +1,13 @@
+#ifndef CONFIG_KEYMAP_H
+#define CONFIG_KEYMAP_H
+
+#include "../../config.h"
+#define RGB_DI_PIN F6
+#define RGBLED_NUM 10
+#define RGBLIGHT_ANIMATIONS
+#ifdef BACKLIGHT_LEVELS
+#undef BACKLIGHT_LEVELS
+#endif
+#define BACKLIGHT_LEVELS 3
+
+#endif
diff --git a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/keymap.c b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/keymap.c
new file mode 100644
index 0000000000..0d3c8557c5
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/keymap.c
@@ -0,0 +1,36 @@
+// This is a game-pad gherkin layout with RGB and LED lights
+
+#include QMK_KEYBOARD_H
+
+backlight_config_t backlight_config;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Game pad
+ * ,-----------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  | Ctl | Alt |  ~  |
+ * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
+ * | Tab |  Q  |  W  |  E  |  R  |  T  | |^| |  ;  |  '  |  /  |
+ * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
+ * | Shf |  A  |  S  |  D  |  F  | <-- | |v| | --> |  ,  |  .  |
+ * `-----------------------------------------------------------'
+ */
+    LAYOUT_ortho_3x10(
+        KC_ESCAPE, KC_1, KC_2, KC_3, KC_4, KC_5,    KC_6,    KC_LCTRL, KC_LALT,  KC_GRAVE,
+        KC_TAB,    KC_Q, KC_W, KC_E, KC_R, KC_T,    KC_UP,   KC_SCLN,  KC_QUOTE, KC_SLASH,
+        KC_LSHIFT, KC_A, KC_S, KC_D, KC_F, KC_LEFT, KC_DOWN, KC_RIGHT, KC_COMMA, KC_DOT
+    )
+};
+
+void matrix_init_user(void) {
+    // Set LED's to max
+    _delay_us(300);
+    backlight_config.level = 2;
+    backlight_config.enable = 1;
+    eeconfig_update_backlight(backlight_config.raw);
+    backlight_set(backlight_config.level);
+    // Set RGB to rainbow mood light
+    rgblight_enable();
+    rgblight_mode(1);
+    rgblight_sethsv(120,255,255);
+    rgblight_mode(6);
+}
diff --git a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/rules.mk b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/rules.mk
new file mode 100644
index 0000000000..cd1cddebf4
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/rules.mk
@@ -0,0 +1,17 @@
+ifndef QUANTUM_DIR
+  include ../../../../Makefile
+endif
+
+USER_NAME := bbaserdem-nouserspace
+
+STENO_ENABLE = no      # Additional protocols for Stenography(+1700), requires VIRTSER
+MOUSEKEY_ENABLE = no   # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no   # Audio control and System control(+450)
+CONSOLE_ENABLE = no    # Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+AUDIO_ENABLE = no 	   # Enable audio output from keyboard
+
+NKRO_ENABLE = yes      # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes  # Enable RBG light strips
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
diff --git a/keyboards/40percentclub/gherkin/keymaps/default/keymap.c b/keyboards/40percentclub/gherkin/keymaps/default/keymap.c
new file mode 100644
index 0000000000..f018200304
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/default/keymap.c
@@ -0,0 +1,74 @@
+#include QMK_KEYBOARD_H
+
+#define _______ KC_TRNS
+#define FN1_Q LT(1, KC_Q)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [0] = LAYOUT_ortho_3x10(
+    FN1_Q,   KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_ESC,
+    KC_Z,    KC_X,    KC_C,    KC_V,    KC_BSPC, KC_SPC,  KC_B,    KC_N,    KC_M,    KC_ENT
+  ),
+
+  [1] = LAYOUT_ortho_3x10(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_INC,
+    _______, _______, _______, _______, _______, _______, RESET,   _______, _______, BL_DEC
+  ),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  keyevent_t event = record->event;
+    (void)event;
+
+  switch (id) {
+
+  }
+  return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+    DDRD |= (1 << 5); PORTD &= ~(1 << 5);
+  } else {
+    DDRD &= ~(1 << 5); PORTD &= ~(1 << 5);
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    DDRB |= (1 << 0); PORTB &= ~(1 << 0);
+  } else {
+    DDRB &= ~(1 << 0); PORTB &= ~(1 << 0);
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}
diff --git a/keyboards/40percentclub/gherkin/keymaps/itsaferbie/config.h b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/config.h
new file mode 100644
index 0000000000..71c0cb8b56
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/config.h
@@ -0,0 +1,15 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#undef RGB_DI_PIN
+#undef RGBLED_NUM
+#define RGB_DI_PIN D2
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 8
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#endif
\ No newline at end of file
diff --git a/keyboards/40percentclub/gherkin/keymaps/itsaferbie/keymap.c b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/keymap.c
new file mode 100644
index 0000000000..580b041c9c
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/keymap.c
@@ -0,0 +1,152 @@
+#include QMK_KEYBOARD_H
+
+extern rgblight_config_t rgblight_config;
+extern keymap_config_t keymap_config;
+
+#define _PS 0 // This is the Photoshop Layer
+#define _AI 1 // This is the Illustrator Layer
+#define _PR 2 // This is the Premier Layer
+#define _XD 3 // This is the Experience Design Layer
+
+enum custom_keycodes {
+  PS = SAFE_RANGE,
+  AI,
+  PR,
+};
+
+#define _______ KC_TRNS
+
+#define PS TO(0)
+#define AI TO(1)
+#define PR TO(2)
+#define XD TO(3)
+
+// Mix of Photoshop, Illustrator, Premiere, and Experience Design shortcuts.
+#define SAVE  LCTL(KC_S)
+#define OPEN  LCTL(KC_O)
+#define COPY  LCTL(KC_C)
+#define PAST  LCTL(KC_V)
+#define CUNDO LCTL(LALT(KC_Z))
+#define INVERT LCTL(LSFT(KC_I))
+#define NLAYER LSFT(LCTL(KC_N))
+#define UNDO LCTL(KC_Z)
+#define TRANS LCTL(KC_T)
+#define ALIGNL LCTL(LSFT(KC_L))
+#define ALIGNC LCTL(LSFT(KC_C))
+#define ALIGNR LCTL(LSFT(KC_R))
+#define BRINGF LCTL(KC_RBRC)
+#define BRINGB LCTL(KC_LBRC)
+
+// Illustrator layer shortcuts.
+#define SHAPE LSFT(KC_M)
+#define RULER LCTL(LALT(KC_R))
+
+// Premiere layer shortcuts.
+#define REDO LCTL(LSFT(KC_Z))
+#define EXPORT LCTL(KC_M)
+#define IMPORT LCTL(KC_I)
+#define PCOPY LCTL(KC_V)
+#define PPASTE LCTL(LSFT(KC_V))
+
+// Experience Design layer shortcuts. (can be used with others too.)
+#define NEW LCTL(KC_N)
+#define LOCK LCTL(KC_L)
+#define SYMB LCTL(KC_K)
+#define HIDE LCTL(KC_SCLN)
+#define REPEAT LCTL(KC_R)
+#define MASK LCTL(LSFT(KC_M))
+#define GROUP LCTL(KC_G)
+#define UNGRP LCTL(LSFT(KC_G))
+#define VIEW LCTL(KC_TAB)
+#define HORZ LSFT(KC_C)
+#define VERT LSFT(KC_M)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  // Photoshop layer
+  [_PS] = LAYOUT_ortho_3x10(
+    SAVE,    KC_W, KC_E, KC_T,  KC_U,   KC_I,   KC_P,   INVERT,  CUNDO,   NLAYER,
+    UNDO,    KC_H, KC_L, TRANS, ALIGNL, ALIGNC, ALIGNR, BRINGB,  BRINGF,  OPEN,
+    KC_LSFT, COPY, PAST, KC_Z,  KC_C,   KC_V,   KC_B,   KC_LBRC, KC_RBRC, AI
+  ),
+
+  // Illustrator layer
+  [_AI] = LAYOUT_ortho_3x10(
+    _______, M(0),    RULER,   _______, KC_G,    _______, _______, KC_Q,  KC_MINS, KC_PLUS,
+    _______, _______, _______, KC_E,    _______, _______, _______, SHAPE, KC_O,    OPEN,
+    _______, _______, _______, _______, _______, _______, _______, KC_M,  KC_SLSH, PR
+  ),
+
+  // Premiere layer
+  [_PR] = LAYOUT_ortho_3x10(
+    _______, KC_Q,  KC_W,   KC_I,   KC_O, KC_P, IMPORT, EXPORT,  KC_MINS,  KC_EQL,
+    _______, REDO,  KC_D,   KC_F,   KC_H, KC_M, KC_ENT, KC_LBRC, KC_RBRC,  OPEN,
+    _______, PCOPY, PPASTE, KC_SPC, KC_Z, KC_C, KC_V,   KC_LEFT, KC_RIGHT, XD
+  ),
+
+  // Experience Design layer
+  [_XD] = LAYOUT_ortho_3x10(
+    _______, KC_E,    KC_R,  KC_T,  KC_P, KC_A, KC_L, KC_V, KC_DEL, NEW,
+    _______, REDO,    GROUP, UNGRP, VIEW, HORZ, VERT, KC_Z, KC_ENT, OPEN,
+    _______, KC_LCTL, COPY,  PAST,  SYMB, LOCK, MASK, HIDE, REPEAT, PS
+  ),
+
+};
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+void matrix_init_user(void) {
+  rgblight_enable();
+}
+
+void matrix_scan_user(void) {
+  #ifdef RGBLIGHT_ENABLE
+
+  static uint8_t old_layer = 255;
+  uint8_t new_layer = biton32(layer_state);
+
+  // Color of the Icons.
+  if (old_layer != new_layer) {
+    switch (new_layer) {
+      case _PS:
+        // #31C5F0
+        rgblight_setrgb(49, 197, 240);
+      break;
+      case _AI:
+        // #FF8011
+        rgblight_setrgb(255, 128, 17);
+      break;
+      case _PR:
+        // #E788FF
+        rgblight_setrgb(231, 136, 255);
+      break;
+      case _XD:
+        // #FF2BC2
+        rgblight_setrgb(255, 43, 194);
+      break;
+    }
+    old_layer = new_layer;
+  }
+  #endif
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  keyevent_t event = record->event;
+    (void)event;
+
+  switch (id) {
+    case 0:
+      // Save for Web Macro.
+      return MACRO(D(LSFT), D(LALT), D(LCTL), T(S), U(LCTL), U(LALT), U(LSFT), END);
+  }
+  return MACRO_NONE;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+  }
+  return true;
+}
diff --git a/keyboards/40percentclub/gherkin/keymaps/itsaferbie/rules.mk b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/rules.mk
new file mode 100644
index 0000000000..ed0af7b8bd
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/rules.mk
@@ -0,0 +1,7 @@
+BACKLIGHT_ENABLE = yes
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/40percentclub/gherkin/keymaps/mjt/config.h b/keyboards/40percentclub/gherkin/keymaps/mjt/config.h
new file mode 100644
index 0000000000..bb59ec213d
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/mjt/config.h
@@ -0,0 +1,169 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x6060
+#define DEVICE_VER   0x0001
+#define MANUFACTURER    Some Guy
+#define PRODUCT         Gherkin
+#define DESCRIPTION     30 percent disaster
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+
+// These are with USB on the left.
+// #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
+// original from TMK:  #define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B4 }
+// #define MATRIX_COL_PINS { D0, D4, F6, D7, E6, B4 }
+
+// these are with USB on the right.
+#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
+#define MATRIX_COL_PINS { B4, E6, D7, F6, D4, D0 }
+
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+#define BACKLIGHT_PIN B5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define AUDIO_VOICES
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1     H
+//#define MAGIC_KEY_HELP2     SLASH
+//#define MAGIC_KEY_DEBUG     D
+//#define MAGIC_KEY_DEBUG_MATRIX  X
+//#define MAGIC_KEY_DEBUG_KBD   K
+//#define MAGIC_KEY_DEBUG_MOUSE  M
+//#define MAGIC_KEY_VERSION    V
+//#define MAGIC_KEY_STATUS     S
+//#define MAGIC_KEY_CONSOLE    C
+//#define MAGIC_KEY_LAYER0_ALT1  ESC
+//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
+//#define MAGIC_KEY_LAYER0     0
+//#define MAGIC_KEY_LAYER1     1
+//#define MAGIC_KEY_LAYER2     2
+//#define MAGIC_KEY_LAYER3     3
+//#define MAGIC_KEY_LAYER4     4
+//#define MAGIC_KEY_LAYER5     5
+//#define MAGIC_KEY_LAYER6     6
+//#define MAGIC_KEY_LAYER7     7
+//#define MAGIC_KEY_LAYER8     8
+//#define MAGIC_KEY_LAYER9     9
+//#define MAGIC_KEY_BOOTLOADER   PAUSE
+//#define MAGIC_KEY_LOCK      CAPS
+//#define MAGIC_KEY_EEPROM     E
+//#define MAGIC_KEY_NKRO      N
+//#define MAGIC_KEY_SLEEP_LED   Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c b/keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c
new file mode 100644
index 0000000000..2b4369c34f
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c
@@ -0,0 +1,279 @@
+#include QMK_KEYBOARD_H
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+
+extern keymap_config_t keymap_config;
+
+//Tap Dance Declarations
+enum {
+  TD_Z_LCTL = 0,
+  TD_X_LGUI = 1,
+  TD_C_LALT = 2,
+  TD_A_TAB = 3,
+  TD_Q_ESC = 4,
+//   M(0)
+};
+
+//Friendly Layer Names
+enum gherkin_layers {
+  _QWERTY,
+  _SONGS,
+  _NUMBERS,
+  _SYMBOLS,
+  _PLOVER,
+  _ADJUST
+};
+
+// custom keycodes
+enum gherkin_keycodes {
+  QWERTY = SAFE_RANGE,
+  NUMBERS,
+  SYMBOLS,
+  SONGS,
+  PLOVER,
+  BACKLIT,
+  MACSLEEP,
+  EXT_PLV
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_ortho_3x10(
+    TD(TD_Q_ESC),   KC_W,               KC_E,           KC_R,  KC_T,               KC_Y,   KC_U,  KC_I,     KC_O,    KC_P,
+    TD(TD_A_TAB),   LT(_SYMBOLS,KC_S),  KC_D,           KC_F,  KC_G,               KC_H,   KC_J,  KC_K,     KC_L,    LT(_ADJUST,KC_SPC),
+    TD(TD_Z_LCTL),  TD(TD_X_LGUI),      TD(TD_C_LALT),  KC_V,  KC_B,  LT(_NUMBERS, KC_N),  KC_M,  KC_COMM,  KC_DOT,  SFT_T(KC_ENT)
+  ),
+  [_NUMBERS] = LAYOUT_ortho_3x10(
+    KC_1,   KC_2,   KC_3,   KC_4,    KC_5,                KC_6,     KC_7,     KC_8,     KC_9,     KC_0,
+    KC_F1,  KC_F2,  KC_F3,  KC_F4,   KC_F5,               KC_F6,    KC_HOME,  KC_PGDN,  KC_PGUP,  KC_END ,
+    KC_F7,  KC_F8,  KC_F9,  KC_F10,  LT(_ADJUST,KC_F11),  _______,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RIGHT
+  ),
+  [_SYMBOLS] = LAYOUT_ortho_3x10(
+    KC_EXLM,  KC_AT,        KC_HASH,  KC_DLR,   KC_PERC,  KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,     KC_RPRN,
+    KC_GRV,   _______,      XXXXXXX,  KC_LBRC,  KC_RBRC,  KC_BSLS,  KC_MINS,  KC_EQL ,  KC_SCLN,     KC_QUOT,
+    KC_TILD,  MO(_ADJUST),  XXXXXXX,  KC_LCBR,  KC_RCBR,  KC_PIPE,  KC_UNDS,  KC_PLUS,  S(KC_SCLN),  S(KC_QUOT)
+  ),
+  [_PLOVER] = LAYOUT_ortho_3x10(
+    KC_Q,     KC_W,     KC_E,  KC_R,  KC_1,     KC_U,  KC_I,  KC_O,     KC_P,     KC_LBRC,
+    KC_A,     KC_S,     KC_D,  KC_F,  KC_G,     KC_J,  KC_K,  KC_L,     KC_SCLN,  KC_QUOT,
+    EXT_PLV,  XXXXXXX,  KC_C,  KC_V,  XXXXXXX,  KC_N,  KC_M,  XXXXXXX,  XXXXXXX,  XXXXXXX
+  ),
+  [_ADJUST] = LAYOUT_ortho_3x10(
+    RESET,    _______,  _______,  _______,  _______,  QWERTY,   NUMBERS,  SYMBOLS,  PLOVER,    SONGS,
+    MUV_DE,   MUV_IN,   MU_ON,    MU_OFF,   _______,  _______,  _______,  _______,  MACSLEEP,  _______,
+    BACKLIT,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______
+  )
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+float tone_plover[][2]     = SONG(PLOVER_SOUND);
+float tone_plover_gb[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(tone_qwerty);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case NUMBERS:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(tone_dvorak);
+        #endif
+        persistant_default_layer_set(1UL<<_NUMBERS);
+      }
+      return false;
+      break;
+    case SYMBOLS:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(tone_colemak);
+        #endif
+        persistant_default_layer_set(1UL<<_SYMBOLS);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_SONG(tone_plover);
+        #endif
+        layer_off(_NUMBERS);
+        layer_off(_SYMBOLS);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(tone_plover_gb);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+    case MACSLEEP:
+      if (record->event.pressed) {
+          // ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER);
+          register_code(KC_RSFT);
+          register_code(KC_RCTL);
+          register_code(KC_POWER);
+          unregister_code(KC_POWER);
+          unregister_code(KC_RCTL);
+          unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    }
+    return true;
+}
+
+
+/*
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  keyevent_t event = record->event;
+
+  switch (id) {
+        case 0: {
+            if (record->event.pressed) {
+                key_timer = timer_read(); // if the key is being pressed, we start the timer.
+            }
+            else { // this means the key was just released, so we can figure out how long it was pressed for (tap or "held down").
+                if (timer_elapsed(key_timer) > 150) { // 150 being 150ms, the threshhold we pick for counting something as a tap.
+                    return MACRO( D(LSFT), END  );
+                }
+                else {
+                    return MACRO( T(N), END  );
+                }
+            }
+            break;
+        }
+      }
+  return MACRO_NONE;
+}*/
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_SONG(tone_startup);
+}
+
+void shutdown_user()
+{
+    PLAY_SONG(tone_goodbye);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_SONG(music_scale);
+}
+
+#endif
+
+void matrix_scan_user(void) {
+}
+
+//Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+  //Tap once for Esc, twice for Caps Lock
+  [TD_Z_LCTL]  = ACTION_TAP_DANCE_DOUBLE(KC_Z, KC_LCTL),
+  [TD_X_LGUI]  = ACTION_TAP_DANCE_DOUBLE(KC_X, KC_LGUI),
+  [TD_C_LALT]  = ACTION_TAP_DANCE_DOUBLE(KC_C, KC_LALT),
+  [TD_A_TAB]  = ACTION_TAP_DANCE_DOUBLE(KC_A, KC_TAB),
+  [TD_Q_ESC]  = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC)
+};
+
+// don't know what this is doing...
+/*
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+    DDRD |= (1 << 5); PORTD &= ~(1 << 5);
+  } else {
+    DDRD &= ~(1 << 5); PORTD &= ~(1 << 5);
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    DDRB |= (1 << 0); PORTB &= ~(1 << 0);
+  } else {
+    DDRB &= ~(1 << 0); PORTB &= ~(1 << 0);
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}
+*/
diff --git a/keyboards/40percentclub/gherkin/keymaps/mjt/rules.mk b/keyboards/40percentclub/gherkin/keymaps/mjt/rules.mk
new file mode 100644
index 0000000000..afb93b674c
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/mjt/rules.mk
@@ -0,0 +1,29 @@
+## not sure where this stuff goes ##
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+TAP_DANCE_ENABLE=yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/40percentclub/gherkin/keymaps/steno/config.h b/keyboards/40percentclub/gherkin/keymaps/steno/config.h
new file mode 100644
index 0000000000..abacefa01d
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/steno/config.h
@@ -0,0 +1,12 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define NO_ACTION_LAYER
+#define NO_ACTION_TAPPING
+#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#endif
\ No newline at end of file
diff --git a/keyboards/40percentclub/gherkin/keymaps/steno/keymap.c b/keyboards/40percentclub/gherkin/keymaps/steno/keymap.c
new file mode 100644
index 0000000000..c7ee63d126
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/steno/keymap.c
@@ -0,0 +1,13 @@
+#include QMK_KEYBOARD_H
+#include "keymap_steno.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  LAYOUT_ortho_3x10(
+    STN_S1,  STN_TL,  STN_PL,  STN_HL,  STN_ST1, STN_FR,  STN_PR,  STN_LR,  STN_TR,  STN_DR ,
+    STN_S2,  STN_KL,  STN_WL,  STN_RL,  STN_ST2, STN_RR,  STN_BR,  STN_GR,  STN_SR,  STN_ZR ,
+    STN_NUM, STN_NUM, STN_A,   STN_O,   STN_NUM, STN_E,   STN_U,   STN_NUM, STN_NUM, STN_NUM),
+};
+
+void matrix_init_user() {
+  steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT
+}
\ No newline at end of file
diff --git a/keyboards/40percentclub/gherkin/keymaps/steno/readme.md b/keyboards/40percentclub/gherkin/keymaps/steno/readme.md
new file mode 100644
index 0000000000..6536ed7aba
--- /dev/null
+++ b/keyboards/40percentclub/gherkin/keymaps/steno/readme.md
@@ -0,0 +1,9 @@
+# Gherkin Steno
+
+This is a stenography-only keymap. It boots by default into GeminiPR mode. All the excess stuff is stripped away (I'd remove normal keyboard support if I could).
+
+> Note: The number bar has been moved to the bottom row in all the left-over spaces.
+
+    | S | T | P | H | * | F | P | L | T | D |
+    | S | K | W | R | * | R | B | G | S | Z |
+    | # | #