atomic

16 files changed, 1396 insertions, 0 deletions

diff --git a/keyboard/atomic/Makefile b/keyboard/atomic/Makefile
new file mode 100644
index 0000000000..0c407f703b
--- /dev/null
+++ b/keyboard/atomic/Makefile
@@ -0,0 +1,135 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = gh60_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC =	keymap_common.c \
+	matrix.c \
+	led.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/atomic/Makefile.pjrc b/keyboard/atomic/Makefile.pjrc
new file mode 100644
index 0000000000..9655ff65a9
--- /dev/null
+++ b/keyboard/atomic/Makefile.pjrc
@@ -0,0 +1,116 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = gh60_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC =	keymap_common.c \
+	matrix.c \
+	led.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_poker.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+MCU = atmega32u4
+#MCU = at90usb1286
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+5000)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+600)
+CONSOLE_ENABLE = yes    # Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	# USB Nkey Rollover(+500)
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+
+plain: OPT_DEFS += -DKEYMAP_PLAIN
+plain: all
+
+poker: OPT_DEFS += -DKEYMAP_POKER
+poker: all
+
+poker_set: OPT_DEFS += -DKEYMAP_POKER_SET
+poker_set: all
+
+poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT
+poker_bit: all
diff --git a/keyboard/atomic/README 2.md b/keyboard/atomic/README 2.md
new file mode 100644
index 0000000000..510cb5c8b6
--- /dev/null
+++ b/keyboard/atomic/README 2.md
@@ -0,0 +1,141 @@
+GH60 keyboard firmware
+======================
+DIY compact keyboard designed and run by komar007 and Geekhack community.
+
+- Both Rev.A and Rev.B PCB are supported by one firmware binary(issue #64)
+
+## GH60 Resources
+- [KOMAR's project page](http://blog.komar.be/projects/gh60-programmable-keyboard/)
+- [Prototyping](http://geekhack.org/index.php?topic=34959.0)
+- [Rev.A PCB test](http://geekhack.org/index.php?topic=37570.0)
+- [Rev.B PCB test](http://geekhack.org/index.php?topic=50685.0)
+- [Group buy](http://geekhack.org/index.php?topic=41464.0)
+
+
+## Build
+Move to this directory then just run `make` like:
+
+    $ make
+
+Use `make -f Makefile.pjrc` if you want to use PJRC stack but I find no reason to do so now.
+
+
+## Keymap
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.
+
+To build firmware binary hex file with a certain keymap just do `make` with `KEYMAP` option like:
+
+    $ make KEYMAP=[poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>]
+
+
+### 1  Poker
+[keymap_poker.c](keymap_poker.c) emulates original Poker layers
+while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
+
+    Fn + Esc = `
+    Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
+
+#### 1.0 Default layer
+    ,-----------------------------------------------------------.
+    |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+    |-----------------------------------------------------------|
+    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+    |-----------------------------------------------------------|
+    |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+    |-----------------------------------------------------------|
+    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
+    |-----------------------------------------------------------|
+    |Ctrl|Gui |Alt |      Space             |Fn  |Gui |App |Ctrl|
+    `-----------------------------------------------------------'
+#### 1.1 Poker Fn layer
+    ,-----------------------------------------------------------.
+    |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|       |
+    |-----------------------------------------------------------|
+    |     |FnQ| Up|   |   |   |   |   |   |Cal|   |Hom|Ins|     |
+    |-----------------------------------------------------------|
+    |      |Lef|Dow|Rig|   |   |Psc|Slk|Pau|   |Tsk|End|        |
+    |-----------------------------------------------------------|
+    |        |Del|   |Web|Mut|VoU|VoD|   |PgU|PgD|Del|   Up     |
+    |-----------------------------------------------------------|
+    |    |    |    |         FnS            |Fn  |Left|Down|Righ|
+    `-----------------------------------------------------------'
+
+
+### 2. Plain
+Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host.
+See [keymap_plain.c](keymap_plain.c) for detail.
+
+#### 1.0 Plain Default layer
+    ,-----------------------------------------------------------.
+    |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+    |-----------------------------------------------------------|
+    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+    |-----------------------------------------------------------|
+    |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+    |-----------------------------------------------------------|
+    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
+    |-----------------------------------------------------------|
+    |Ctrl|Gui |Alt |      Space             |Alt |Gui |App |Ctrl|
+    `-----------------------------------------------------------'
+
+
+### 3. Hasu
+This is my favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap_hasu.c](keymap_hasu.c) for detail.
+
+
+### 4. SpaceFN
+This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap_spacefn.c](keymap_spacefn.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0).
+
+#### 4.0 Default layer
+    ,-----------------------------------------------------------.
+    |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+    |-----------------------------------------------------------|
+    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+    |-----------------------------------------------------------|
+    |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+    |-----------------------------------------------------------|
+    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
+    |-----------------------------------------------------------|
+    |Ctrl|Gui |Alt |      Space/Fn          |Alt |Gui |App |Ctrl|
+    `-----------------------------------------------------------'
+#### 4.1 SpaceFN layer
+    ,-----------------------------------------------------------.
+    |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+    |-----------------------------------------------------------|
+    |     |   |   |   |   |   |   |Hom|Up |End|Psc|Slk|Pau|Ins  |
+    |-----------------------------------------------------------|
+    |      |   |   |   |   |   |PgU|Lef|Dow|Rig|   |   |        |
+    |-----------------------------------------------------------|
+    |        |   |   |   |   |Spc|PgD|`  |~  |   |   |          |
+    |-----------------------------------------------------------|
+    |    |    |    |            Fn          |    |    |    |    |
+    `-----------------------------------------------------------'
+
+
+### 5. HHKB
+[keymap_hhkb.c](keymap_hhkb.c) emulates original HHKB layers.
+#### 5.0: Default layer
+    ,-----------------------------------------------------------.
+    |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|
+    |-----------------------------------------------------------|
+    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Bspc |
+    |-----------------------------------------------------------|
+    |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  |
+    |-----------------------------------------------------------|
+    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn |
+    |-----------------------------------------------------------|
+    |    |Gui |Alt |      Space             |    |Alt |Gui |    |
+    `-----------------------------------------------------------'
+#### 5.1: HHKB Fn layer
+    ,-----------------------------------------------------------.
+    |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+    |-----------------------------------------------------------|
+    |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |     |
+    |-----------------------------------------------------------|
+    |      |VoD|VoU|Mut|Ejc|   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+    |-----------------------------------------------------------|
+    |        |   |   |   |   |   |  +|  -|End|PgD|Dow|      |   |
+    |-----------------------------------------------------------|
+    |    |    |    |                        |    |    |    |    |
+    `-----------------------------------------------------------'
+
diff --git a/keyboard/atomic/config.h b/keyboard/atomic/config.h
new file mode 100644
index 0000000000..5ea953805f
--- /dev/null
+++ b/keyboard/atomic/config.h
@@ -0,0 +1,70 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Ortholinear Keyboards
+#define PRODUCT         Atomic Keyboard
+#define DESCRIPTION     t.m.k. keyboard firmware for Atomic
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboard/atomic/keymap_common.c b/keyboard/atomic/keymap_common.c
new file mode 100644
index 0000000000..fdb1769e1c
--- /dev/null
+++ b/keyboard/atomic/keymap_common.c
@@ -0,0 +1,30 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "keymap_common.h"
+
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+    return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+    return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
+}
diff --git a/keyboard/atomic/keymap_common.h b/keyboard/atomic/keymap_common.h
new file mode 100644
index 0000000000..f827480f0e
--- /dev/null
+++ b/keyboard/atomic/keymap_common.h
@@ -0,0 +1,51 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+#include "print.h"
+#include "debug.h"
+#include "keymap.h"
+
+
+extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,   K0E,    \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,    K2C,   K2E, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,    K3B,   K3D, K3E, \
+     K40,  K42,  K45,  K46,     K47,    K48,  K49,  K4A,  K4B,  K4C, K4D, K4E  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO,    KC_##K0E }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_NO,    KC_##K2E }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_NO,    KC_##K3D, KC_##K3E }, \
+    { KC_##K40, KC_NO,    KC_##K42, KC_NO,    KC_NO,    KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E }  \
+}
+
+#endif
diff --git a/keyboard/atomic/keymap_hasu.c b/keyboard/atomic/keymap_hasu.c
new file mode 100644
index 0000000000..e6af28585b
--- /dev/null
+++ b/keyboard/atomic/keymap_hasu.c
@@ -0,0 +1,145 @@
+#include "keymap_common.h"
+
+/*
+ * Hasu
+ */
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Keymap 0: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+     * |-----------------------------------------------------------|
+     * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|Fn2|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl|Gui |Alt |      Space             |Alt |Fn4 |Fn4 |Fn1 |
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP_ANSI(
+        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC, \
+        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
+        LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN2, QUOT,     ENT,  \
+        LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN1,           FN9,  \
+        LCTL,LGUI,LALT,          SPC,                     RALT,FN3, FN3, FN0),
+    /* Keymap 1: colemak */
+    KEYMAP_ANSI(
+        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC, \
+        TAB, Q,   W,   F,   P,   G,   J,   L,   U,   Y,   SCLN,LBRC,RBRC,BSLS, \
+        BSPC,A,   R,   S,   T,   D,   H,   N,   E,   I,   O,   QUOT,     ENT,  \
+        LSFT,Z,   X,   C,   V,   B,   K,   M,   COMM,DOT, SLSH,          RSFT, \
+        LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, FN0),
+    /* Keymap 2: dvorak */
+    KEYMAP_ANSI(
+        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   LBRC,RBRC,BSPC, \
+        TAB, QUOT,COMM,DOT, P,   Y,   F,   G,   C,   R,   L,   SLSH,EQL, BSLS, \
+        CAPS,A,   O,   E,   U,   I,   D,   H,   T,   N,   S,   MINS,     ENT,  \
+        LSFT,SCLN,Q,   J,   K,   X,   B,   M,   W,   V,   Z,             RSFT, \
+        LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, FN0),
+    /* Keymap 3: workman */
+    KEYMAP_ANSI(
+        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC, \
+        TAB, Q,   D,   R,   W,   B,   J,   F,   U,   P,   SCLN,LBRC,RBRC,BSLS, \
+        BSPC,A,   S,   H,   T,   G,   Y,   N,   E,   O,   I,   QUOT,     ENT,  \
+        LSFT,Z,   X,   M,   C,   V,   K,   L,   COMM,DOT, SLSH,          RSFT, \
+        LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, FN0),
+
+    /* Overlay 4: HHKB mode
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+     * |-----------------------------------------------------------|
+     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |Inser|
+     * |-----------------------------------------------------------|
+     * |Contro|VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |  +|  -|End|PgD|Dow|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl|Gui |Alt |      Space             |Alt |Gui |App |    |
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP_ANSI(
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,  \
+        CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS,UP,  TRNS,INS,  \
+        LCTL,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,     ENT,  \
+        LSFT,TRNS,TRNS,TRNS,TRNS,TRNS,PPLS,PMNS,END, PGDN,DOWN,          RSFT, \
+        LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,FN4, TRNS),
+    /* Overlay 5: Vi mode (Slash)
+     * ,-----------------------------------------------------------.
+     * |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |Hom|PgD|Up |PgU|End|Hom|PgD|PgU|End|   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |Contro|   |Lef|Dow|Rig|   |Lef|Dow|Up |Rig|   |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |Hom|PgD|PgU|End|   |Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl|Gui |Alt |      Space             |Alt |Gui |App |Ctrl|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP_ANSI(
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, BSPC, \
+        TAB, HOME,PGDN,UP,  PGUP,END, HOME,PGDN,PGUP,END, TRNS,TRNS,TRNS,TRNS, \
+        LCTL,TRNS,LEFT,DOWN,RGHT,TRNS,LEFT,DOWN,UP,  RGHT,TRNS,TRNS,     ENT,  \
+        LSFT,TRNS,TRNS,TRNS,TRNS,TRNS,HOME,PGDN,PGUP,END, TRNS,          RSFT, \
+        LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL),
+    /* Overlay 6: Mouse mode (Semicolon/App)
+     * ,-----------------------------------------------------------.
+     * |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |   |   |   |   |   |MwL|MwD|MwU|MwR|   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |Contro|   |Ac0|Ac1|Ac1|   |McL|McD|McU|McR|   |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |Mb3|Mb2|Mb1|Mb4|Mb5|   |Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl|Gui |Alt |      Space             |    |    |    |    |
+     * `-----------------------------------------------------------'
+     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
+     */
+    KEYMAP_ANSI(
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, BSPC, \
+        TAB, TRNS,TRNS,TRNS,TRNS,TRNS,WH_L,WH_D,WH_U,WH_R,TRNS,TRNS,TRNS,TRNS, \
+        LCTL,TRNS,ACL0,ACL1,ACL2,TRNS,MS_L,MS_D,MS_U,MS_R,TRNS,TRNS,     ENT,  \
+        LSFT,TRNS,TRNS,TRNS,TRNS,BTN3,BTN2,BTN1,BTN4,BTN5,TRNS,          RSFT, \
+        LCTL,LGUI,LALT,          BTN1,                    TRNS,TRNS,TRNS,RCTL),
+    /* Overlay 7: Layout selector
+     * ,-----------------------------------------------------------.
+     * | Lq| Lc| Ld| Lw|   |   |   |   |   |   |   |   |   |       |
+     * |-----------------------------------------------------------|
+     * |     |Lq |Lw |   |   |   |   |   |   |   |   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |      |   |   |Ld |   |   |   |   |   |   |   |   |        |
+     * |-----------------------------------------------------------|
+     * |        |   |   |Lc |   |   |   |   |   |   |   |          |
+     * |-----------------------------------------------------------|
+     * |    |    |    |                        |    |    |    |    |
+     * `-----------------------------------------------------------'
+     * Lq: set Qwerty layout
+     * Lc: set Colemak layout
+     * Ld: set Dvorak layout
+     * Lw: set Workman layout
+     */
+    KEYMAP_ANSI(
+        FN5, FN6, FN7, FN8, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
+        TRNS,FN5, FN8, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
+        TRNS,TRNS,TRNS,FN7, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS, \
+        TRNS,TRNS,TRNS,FN6, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,          TRNS, \
+        TRNS,TRNS,TRNS,          TRNS,                    TRNS,TRNS,TRNS,TRNS),
+};
+
+/*
+ * Fn action definition
+ */
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(4),
+    [1] = ACTION_LAYER_TAP_KEY(5, KC_SLASH),
+    [2] = ACTION_LAYER_TAP_KEY(6, KC_SCLN),
+    [3] = ACTION_LAYER_MOMENTARY(6),
+    [4] = ACTION_LAYER_MOMENTARY(7),   // to Layout selector
+    [5] = ACTION_DEFAULT_LAYER_SET(0),  // set qwerty layout
+    [6] = ACTION_DEFAULT_LAYER_SET(1),  // set colemak layout
+    [7] = ACTION_DEFAULT_LAYER_SET(2),  // set dvorak layout
+    [8] = ACTION_DEFAULT_LAYER_SET(3),  // set workman layout
+    [9] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRV),
+};
diff --git a/keyboard/atomic/keymap_hhkb.c b/keyboard/atomic/keymap_hhkb.c
new file mode 100644
index 0000000000..ce1b816ecb
--- /dev/null
+++ b/keyboard/atomic/keymap_hhkb.c
@@ -0,0 +1,52 @@
+#include "keymap_common.h"
+
+/*
+ * HHKB Layout
+ */
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: Default layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Bspc |
+     * |-----------------------------------------------------------|
+     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn |
+     * |-----------------------------------------------------------|
+     * |    |Gui |Alt |      Space             |    |Alt |Gui |    |
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP_HHKB(
+        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS, GRV, \
+        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSPC,      \
+        LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,       \
+        LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RSFT,FN0,       \
+        NO,  LGUI,LALT,          SPC,                     NO,  RALT,RGUI,NO),
+    /* 1: HHKB Fn layer
+     * ,-----------------------------------------------------------.
+     * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |     |
+     * |-----------------------------------------------------------|
+     * |      |VoD|VoU|Mut|Ejc|   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+     * |-----------------------------------------------------------|
+     * |        |   |   |   |   |   |  +|  -|End|PgD|Dow|      |   |
+     * |-----------------------------------------------------------|
+     * |    |    |    |                        |    |    |    |    |
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP_HHKB(
+        PWR, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL,  \
+        CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS,UP,  TRNS,TRNS,      \
+        TRNS,VOLD,VOLU,MUTE,EJCT,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,     PENT,      \
+        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PPLS,PMNS,END, PGDN,DOWN,     TRNS,TRNS,      \
+        TRNS,TRNS,TRNS,          TRNS,                    TRNS,TRNS,TRNS,TRNS),
+};
+
+/*
+ * Fn action definition
+ */
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),
+};
diff --git a/keyboard/atomic/keymap_plain.c b/keyboard/atomic/keymap_plain.c
new file mode 100644
index 0000000000..d1e5c54871
--- /dev/null
+++ b/keyboard/atomic/keymap_plain.c
@@ -0,0 +1,50 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: qwerty */
+    [0] = KEYMAP(GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,    BSPC, \
+                 TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, DEL, \
+                 ESC,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,    ENT,     MPLY, \
+                 LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH,    RSFT,    VOLD, VOLU, \
+                 LCTL,    LALT,  LGUI,  FN2,    SPC,   FN1,  RGUI,   RALT,         LEFT, DOWN, UP,   RGHT),
+    [1] = KEYMAP(GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,    BSPC, \
+                 TAB,  Q,    W,    F,    P,    G,    J,    L,    U,    Y,    SCLN, LBRC, RBRC, BSLS, DEL, \
+                 ESC,  A,    R,    S,    T,    D,    H,    N,    E,    I,    O,    QUOT,    ENT,     MPLY, \
+