Relocate platform specific drivers (#13894)

* Relocate platform specific drivers

* Move stm eeprom

* Tidy up slightly

1 files changed, 0 insertions, 116 deletions

diff --git a/drivers/chibios/serial_usart.h b/drivers/chibios/serial_usart.h
deleted file mode 100644
index c64e15566f..0000000000
--- a/drivers/chibios/serial_usart.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* Copyright 2021 QMK
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-#include "serial.h"
-#include "printf.h"
-
-#include <ch.h>
-#include <hal.h>
-
-#if !defined(SERIAL_USART_DRIVER)
-#    define SERIAL_USART_DRIVER SD1
-#endif
-
-#if !defined(USE_GPIOV1)
-/* The default PAL alternate modes are used to signal that the pins are used for USART. */
-#    if !defined(SERIAL_USART_TX_PAL_MODE)
-#        define SERIAL_USART_TX_PAL_MODE 7
-#    endif
-#    if !defined(SERIAL_USART_RX_PAL_MODE)
-#        define SERIAL_USART_RX_PAL_MODE 7
-#    endif
-#endif
-
-#if defined(SOFT_SERIAL_PIN)
-#    define SERIAL_USART_TX_PIN SOFT_SERIAL_PIN
-#endif
-
-#if !defined(SERIAL_USART_TX_PIN)
-#    define SERIAL_USART_TX_PIN A9
-#endif
-
-#if !defined(SERIAL_USART_RX_PIN)
-#    define SERIAL_USART_RX_PIN A10
-#endif
-
-#if !defined(USART_CR1_M0)
-#    define USART_CR1_M0 USART_CR1_M  // some platforms (f1xx) dont have this so
-#endif
-
-#if !defined(SERIAL_USART_CR1)
-#    define SERIAL_USART_CR1 (USART_CR1_PCE | USART_CR1_PS | USART_CR1_M0)  // parity enable, odd parity, 9 bit length
-#endif
-
-#if !defined(SERIAL_USART_CR2)
-#    define SERIAL_USART_CR2 (USART_CR2_STOP_1)  // 2 stop bits
-#endif
-
-#if !defined(SERIAL_USART_CR3)
-#    define SERIAL_USART_CR3 0
-#endif
-
-#if defined(USART1_REMAP)
-#    define USART_REMAP                             \
-        do {                                        \
-            (AFIO->MAPR |= AFIO_MAPR_USART1_REMAP); \
-        } while (0)
-#elif defined(USART2_REMAP)
-#    define USART_REMAP                             \
-        do {                                        \
-            (AFIO->MAPR |= AFIO_MAPR_USART2_REMAP); \
-        } while (0)
-#elif defined(USART3_PARTIALREMAP)
-#    define USART_REMAP                                          \
-        do {                                                     \
-            (AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_PARTIALREMAP); \
-        } while (0)
-#elif defined(USART3_FULLREMAP)
-#    define USART_REMAP                                       \
-        do {                                                  \
-            (AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_FULLREMAP); \
-        } while (0)
-#endif
-
-#if !defined(SELECT_SOFT_SERIAL_SPEED)
-#    define SELECT_SOFT_SERIAL_SPEED 1
-#endif
-
-#if defined(SERIAL_USART_SPEED)
-// Allow advanced users to directly set SERIAL_USART_SPEED
-#elif SELECT_SOFT_SERIAL_SPEED == 0
-#    define SERIAL_USART_SPEED 460800
-#elif SELECT_SOFT_SERIAL_SPEED == 1
-#    define SERIAL_USART_SPEED 230400
-#elif SELECT_SOFT_SERIAL_SPEED == 2
-#    define SERIAL_USART_SPEED 115200
-#elif SELECT_SOFT_SERIAL_SPEED == 3
-#    define SERIAL_USART_SPEED 57600
-#elif SELECT_SOFT_SERIAL_SPEED == 4
-#    define SERIAL_USART_SPEED 38400
-#elif SELECT_SOFT_SERIAL_SPEED == 5
-#    define SERIAL_USART_SPEED 19200
-#else
-#    error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif
-
-#if !defined(SERIAL_USART_TIMEOUT)
-#    define SERIAL_USART_TIMEOUT 100
-#endif
-
-#define HANDSHAKE_MAGIC 7