Digitizer HID interface : absolute coordinates for mouse cursor (#12851)

* Add digitizer HID interface for setting the mouse cursor position at
absolute screen coordinates. Tested on Pro Micro, Proton C and
Blackpill.

* Update docs/feature_digitizer.md

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update tmk_core/protocol/usb_descriptor.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Add missing copyrights
Add V-USB support

* Add support for digitizer dedicated endpoint for lufa and chibios.
Fix formatting issues
Move digitizer_task definition to the feature's base implementation file

* Run cformat on modified files

* Change digitizer report usage to Digitizer instead of Pen to avoid
pointer disappearing on Windows.

* Update tmk_core/protocol/vusb/vusb.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Run cformat from docker image

* Remove send_digitizer from host_driver_t and instead rely on the
declaration being the interface to the implementation in each
HW-specific usb implementation.

* Fix build : send_digitizer shouldn't be static in vusb and add
weak-linkage implementation for tests without usb implementation

* Change digitizer user interface to match pointing device's

* Update documentation with new API

Co-authored-by: a-chol <nothing@none.com>
Co-authored-by: Ryan <fauxpark@gmail.com>

1 files changed, 35 insertions, 0 deletions

diff --git a/docs/feature_digitizer.md b/docs/feature_digitizer.md
new file mode 100644
index 0000000000..9b6aeddbaa
--- /dev/null
+++ b/docs/feature_digitizer.md
@@ -0,0 +1,35 @@
+## Digitizer
+
+The digitizer HID interface allows setting the mouse cursor position at absolute coordinates, unlike the Pointing Device feature that applies relative displacements.
+
+To enable the digitizer interface, add the following line to your rules.mk: 
+
+```makefile
+DIGITIZER_ENABLE = yes
+```
+
+In order to change the mouse cursor position from your keymap.c file, include the digitizer header : 
+
+```c
+#include "digitizer.h"
+```
+
+This gives you access to the `digitizer` structure which members allow you to change the cursor position.
+
+The coordinates are normalized, meaning there value must be set between 0 and 1. For the `x` coordinate, the value `0` is the leftmost position, whereas the value `1` is the rightmost position.
+For the `y` coordinate, `0` is at the top and `1` at the bottom.
+
+Here is an example setting the cursor in the middle of the screen:
+
+```c
+digitizer_t digitizer;
+digitizer.x = 0.5;
+digitizer.y = 0.5;
+digitizer.tipswitch = 0;
+digitizer.inrange = 1;
+digitizer_set_report(digitizer);
+```
+
+The `tipswitch` member triggers what equates to a click when set to `1`. The `inrange` member is required for the change in coordinates to be taken. It can then be set to `0` in a new report to signal the end of the digitizer interaction, but it is not strictly required.
+
+Once all members are set to the desired value, the `status` member needs its bitmask `DZ_UPDATED` to be set so the report is sent during the next main loop iteration.