cleans up folder structure

* consolidates docs
* deletes converter/
* updates .md references (most)

6 files changed, 0 insertions, 772 deletions

diff --git a/converter/terminal_bluefruit/Makefile b/converter/terminal_bluefruit/Makefile
deleted file mode 100644
index dec9233ec9..0000000000
--- a/converter/terminal_bluefruit/Makefile
+++ /dev/null
@@ -1,99 +0,0 @@
-# Target file name (without extension).
-TARGET = terminal_bluefruit
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = 	keymap.c \
-	matrix.c \
-	led.c
-
-CONFIG_H = config.h
-
-BLUEFRUIT_TRACE_SERIAL=true
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4       # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-#MCU = at90usb1286      # Teensy++ 2.0
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in bytes
-#   Teensy halfKay   512
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = yes	# Console for debug(+400)
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
-
-
-#
-# PS/2 protocol implementations
-# 	USART is recommended if it is available, others are for reference purpose.
-# 	INT implementation will drop simultaneous key strokes.
-#
-#PS2_USE_USART = yes	# uses hardware USART engine for PS/2 signal receive(recomened)
-PS2_USE_INT = yes	# uses external interrupt for falling edge of PS/2 clock pin
-#PS2_USE_BUSYWAIT = yes	# uses primitive reference code
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/protocol/bluefruit.mk
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/converter/terminal_bluefruit/README b/converter/terminal_bluefruit/README
deleted file mode 100644
index 6ff1bc92f3..0000000000
--- a/converter/terminal_bluefruit/README
+++ /dev/null
@@ -1,37 +0,0 @@
-Keyboard converter for IBM terminal keyboard
-============================================
-It supports PS/2 Scan Code Set 3 and runs on USB AVR chips such like PJRC Teensy.
-I tested the converter on ATMega32U4 with 1392595(102keys) and 6110345(122keys).
-
-Source code: https://github.com/tmk/tmk_keyboard
-Article: http://geekhack.org/index.php?topic=27272.0
-
-
-CONNECTION
-----------
-Keyboard    ATMega32U4
-----------------------
-Data:       PD2
-Clock:      PD5
-
-And VCC and GND, of course. See RESOURCE for keyboard connector pin assign.
-
-
-BUILD
------
-$ git clone https://github.com/tmk/tmk_keyboard.git
-$ cd converter/terminal_usb
-$ make 
-
-
-RESOURCE
---------
-Soarer's Converter: http://geekhack.org/index.php?topic=17458.0
-102keys(1392595): http://geekhack.org/index.php?topic=10737.0
-122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html
-KbdBabel: http://www.kbdbabel.org/
-RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png
-DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png
-WinAVR: http://winavr.sourceforge.net/
-
-EOF
diff --git a/converter/terminal_bluefruit/config.h b/converter/terminal_bluefruit/config.h
deleted file mode 100644
index 8bf139d35f..0000000000
--- a/converter/terminal_bluefruit/config.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-Converter for 70% IBM Terminal Keyboard
-Author: Benjamin Gould, 2013
-Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6535
-#define DEVICE_VER      0x0100
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         70% IBM Terminal Keyboard Converter w/ Bluetooth
-#define DESCRIPTION     USB converter for IBM Terminal Keyboard w/ Bluetooth
-
-
-/* matrix size */
-#define MATRIX_ROWS 17  // keycode bit: 3-0
-#define MATRIX_COLS 8   // keycode bit: 6-4
-
-
-/* legacy keymap support */
-// #define USE_LEGACY_KEYMAP
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \
-    (keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL)))  \
-)
-
-/* USART configuration
- *     asynchronous, 9600baud, 8-data bit, non parity, 1-stop bit, no flow control
- */
-#ifdef __AVR_ATmega32U4__
-    #define SERIAL_UART_BAUD       9600
-    #define SERIAL_UART_DATA       UDR1
-    #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
-    #define SERIAL_UART_RXD_VECT   USART1_RX_vect
-    #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
-    #define SERIAL_UART_INIT()     do { \
-        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
-        UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
-        UCSR1B = (1<<TXEN1);                /* TX: enable */ \
-        UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
-                 (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
-        sei(); \
-    } while(0)
-#else
-#   error "USART configuration is needed."
-#endif
-
-/*
- * PS/2 Interrupt configuration
- */
-#ifdef PS2_USE_INT
-/* uses INT1 for clock line(ATMega32U4) */
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   1
-
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    0
-
-#define PS2_INT_INIT()  do {    \
-    EICRA |= ((1<<ISC11) |      \
-              (0<<ISC10));      \
-} while (0)
-#define PS2_INT_ON()  do {      \
-    EIMSK |= (1<<INT1);         \
-} while (0)
-#define PS2_INT_OFF() do {      \
-    EIMSK &= ~(1<<INT1);        \
-} while (0)
-#define PS2_INT_VECT    INT1_vect
-#endif
-
-
-/*
- * PS/2 Busywait configuration
- */
-#ifdef PS2_USE_BUSYWAIT
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   1
-
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    0
-#endif
-
-#endif
diff --git a/converter/terminal_bluefruit/keymap.c b/converter/terminal_bluefruit/keymap.c
deleted file mode 100644
index 8acd8cfb33..0000000000
--- a/converter/terminal_bluefruit/keymap.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
-Converter for 70% IBM Terminal Keyboard
-Author: Benjamin Gould, 2013
-Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "keymap.h"
-
-
-
-
-/* 
- * IBM Terminal keyboard 6110345(122keys)/1392595(102keys)
- * http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
- * http://www.seasip.info/VintagePC/ibm_1391406.html
- *
- * Keymap array:
- *     8 bytes
- *   +---------+
- *  0|         |
- *  :|         | 0x00-0x87
- *  ;|         |
- * 17|         |
- *   +---------+
- */
-#define KEYMAP( \
-                  K08,K10,K18,K20,K28,K30,K38,K40,K48,K50,K57,K5F,                                         \
-                  K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E,                                         \
-                                                                                                           \
-    K05,K06,  K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66,  K67,K6E,K6F,  K76,K77,K7E,K84, \
-    K04,K0C,  K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,    K5C,  K64,K65,K6D,  K6C,K75,K7D,K7C, \
-    K03,K0B,  K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K53,K5A,      K63,      K6B,K73,K74,K7B, \
-    K83,K0A,  K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,    K51,K59,  K61,K62,K6A,  K69,K72,K7A,K79, \
-    K01,K09,  K11,    K19,            K29,                    K39,    K58,      K60,      K68,K70,K71,K78  \
-) { \
-    { KC_NO,    KC_##K01, KC_NO,    KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
-    { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
-    { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
-    { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
-    { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
-    { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
-    { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
-    { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
-    { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \
-    { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
-    { KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \
-    { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
-    { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_##K83, KC_##K84, KC_NO,    KC_NO,    KC_NO,   }, \
-}
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: default
-     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
-     * `---'   `---------------' `---------------' `---------------' `-----------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|BS | |Ins|Hom|PgU| |NmL|  /|  *|  -|
-     * |-----------------------------------------------------------| |-----------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|   |
-     * |-----------------------------------------------------------| `-----------' |-----------|  +|
-     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  #|Retu|               |  4|  5|  6|   |
-     * |-----------------------------------------------------------|     ,---.     |---------------|
-     * |Shif|  \|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
-     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
-     * |Ctrl|    |Alt |          Space              |Alt |    |Ctrl| |Lef|Dow|Rig| |      0|  .|   |
-     * `----'    `---------------------------------------'    `----' `-----------' `---------------'
-     */
-/*
-    KEYMAP(
-                     F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
-                     F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,
-
-    PSCR,ESC,   GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,  INS, HOME,PGUP,  NLCK,PSLS,PAST,PMNS,
-    SLCK,INT4,  TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,  DEL, END, PGDN,  P7,  P8,  P9,  PPLS,
-    PAUS,INT5,  CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     NUHS,ENT,        UP,         P4,  P5,  P6,  PCMM,
-    APP, INT6,  LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RO,  RSFT,  LEFT,INT2,RGHT,  P1,  P2,  P3,  PENT,
-    RGUI,LGUI,  LCTL,     LALT,               SPC,                          RALT,     RCTL,       DOWN,       NO,  P0,  PDOT,NO
-    ),
-*/
-    /*
-    KEYMAP(
-                     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-                     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-
-    TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,
-    TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,  TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,
-    TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,       TRNS,       TRNS,TRNS,TRNS,TRNS,
-    TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,  TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,
-    TRNS,TRNS,  TRNS,     TRNS,               TRNS,                         TRNS,     TRNS,       TRNS,       TRNS,TRNS,TRNS,TRNS
-    ),
-    */
-    // pseudo ANSI
-
-    KEYMAP(
-                     FN0, NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  
-                     PSCR,PAUS,PGUP,PGDN,HOME,END, INS, DEL, LEFT,DOWN,UP,  RGHT,
-
-    NO,  NO,    ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, GRV, BSPC,  NO,  NO,  NO,    NO,  NO,  NO,  NO,
-    NO,  NO,    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,  NO,  NO,  NO,    NO,  NO,  NO,  NO,
-    NO,  NO,    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     BSLS,ENT,        NO,         NO,  NO,  NO,  NO,
-    NO,  NO,    LSFT,FN1 ,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     FN1, RSFT,  NO,  NO,  NO,    NO,  NO,  NO,  NO,
-    NO,  NO,    LCTL,     LALT,               SPC,                          LGUI,     APP,        NO,         NO,  NO,  NO,  NO
-    ),
-    
-    // Momentary Function Layer
-    KEYMAP(
-                     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-                     TRNS,MUTE,VOLD,VOLU,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-
-    TRNS,TRNS,  TRNS,F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL,   TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,
-    TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,HOME,UP  ,END,      TRNS,  TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,
-    TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MS_L,MS_D,MS_U,MS_R,LEFT,DOWN,     RGHT,TRNS,       TRNS,       TRNS,TRNS,TRNS,TRNS,
-    TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,PGDN,TRNS,     TRNS,RSFT,  TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,
-    TRNS,TRNS,  BTN2,     TRNS,               BTN1,                         RALT,     RCTL,       TRNS,       TRNS,TRNS,TRNS,TRNS
-    ),
-    
-    // Mouse Layer
-    KEYMAP(
-                     FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-                     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-
-    TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO,  TRNS,  NO,  NO,  NO,    NO,  NO,  NO,  NO,
-    TRNS,TRNS,  TRNS,NO,  NO,  MS_U,NO,  NO,  WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,       TRNS,  NO,  NO,  NO,    NO,  NO,  NO,  NO,
-    TRNS,TRNS,  BTN2,BTN1,MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,NO,  NO,       NO,  ENT,        NO,         NO,  NO,  NO,  NO,
-    TRNS,TRNS,  TRNS,TRNS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,       NO,  RSFT,  NO,  NO,  NO,    NO,  NO,  NO,  NO,
-    TRNS,TRNS,  TRNS,     TRNS,               BTN1,                         BTN2,     TRNS,       NO,         NO,  NO,  NO,  NO
-    ),
-    
-    // vi Layer
-    KEYMAP(
-                     FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-                     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-
-    TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO,  TRNS,  NO,  NO,  NO,    NO,  NO,  NO,  NO,
-    TRNS,TRNS,  TRNS,HOME,PGDN,UP,  PGUP,END, HOME,PGDN,PGUP,END, NO,  NO,  NO,       TRNS,  NO,  NO,  NO,    NO,  NO,  NO,  NO,
-    TRNS,TRNS,  TRNS,NO,  LEFT,DOWN,RGHT,NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,       NO,  ENT,        NO,         NO,  NO,  NO,  NO,
-    TRNS,TRNS,  TRNS,TRNS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,       NO,  RSFT,  NO,  NO,  NO,    NO,  NO,  NO,  NO,
-    TRNS,TRNS,  TRNS,     TRNS,               SPC,                          RALT,     RCTL,       NO,         NO,  NO,  NO,  NO
-    ),
-    
-    // num lock layer
-    KEYMAP(
-                     FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-                     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-
-    TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,
-    TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,  TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,
-    TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,       TRNS,       TRNS,TRNS,TRNS,TRNS,
-    TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,  TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,
-    TRNS,TRNS,  TRNS,     TRNS,               TRNS,                         TRNS,     TRNS,       TRNS,       TRNS,TRNS,TRNS,TRNS
-    ),
-
-};
-
-
-static const uint16_t fn_actions[] PROGMEM = {
-    [0] = ACTION_DEFAULT_LAYER_SET(0),
-    [1] = ACTION_LAYER_MOMENTARY(1),
-    [2] = ACTION_LAYER_MOMENTARY(2), //ACTION_LAYER_ON(2, ON_RELEASE),
-    [3] = KC_NO, //ACTION_LAYER_ON(3, ON_RELEASE),
-    [4] = KC_NO, //ACTION_LAYER_ON(4, ON_RELEASE),
-    [5] = KC_NO,
-    [6] = KC_NO,
-    [7] = KC_NO,
-};
-
-/*
-enum macro_id {
-    MS_UL,
-    MS_UR,
-    MS_DL,
-    MS_DR,
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    keyevent_t event = record->event;
-
-    switch (id) {
-        case MS_UL:
-            return (event.pressed ? MACRO( D(MS_L), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) );
-        case MS_UR:
-            return (event.pressed ? MACRO( D(MS_R), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) );
-        case MS_DL:
-            return (event.pressed ? MACRO( D(MS_L), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) );
-        case MS_DR:
-            return (event.pressed ? MACRO( D(MS_R), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) );
-    }
-    return MACRO_NONE;
-}
-*/
-
-uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
-{
-    return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
-}
-
-action_t keymap_fn_to_action(uint8_t keycode)
-{
-    action_t action;
-    action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
-    return action;
-}
diff --git a/converter/terminal_bluefruit/led.c b/converter/terminal_bluefruit/led.c
deleted file mode 100644
index e5bf41d4ab..0000000000
--- a/converter/terminal_bluefruit/led.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
-Converter for 70% IBM Terminal Keyboard
-Author: Benjamin Gould, 2013
-Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stdint.h"
-#include "ps2.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
-    uint8_t ps2_led = 0;
-    if (usb_led &  (1<<USB_LED_SCROLL_LOCK))
-        ps2_led |= (1<<PS2_LED_SCROLL_LOCK);
-    if (usb_led &  (1<<USB_LED_NUM_LOCK))
-        ps2_led |= (1<<PS2_LED_NUM_LOCK);
-    if (usb_led &  (1<<USB_LED_CAPS_LOCK))
-        ps2_led |= (1<<PS2_LED_CAPS_LOCK);
-    ps2_host_set_led(ps2_led);
-}
diff --git a/converter/terminal_bluefruit/matrix.c b/converter/terminal_bluefruit/matrix.c
deleted file mode 100644
index 36901536f1..0000000000
--- a/converter/terminal_bluefruit/matrix.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "util.h"
-#include "debug.h"
-#include "ps2.h"
-#include "matrix.h"
-
-
-static void matrix_make(uint8_t code);
-static void matrix_break(uint8_t code);
-#ifdef MATRIX_HAS_GHOST
-static bool matrix_has_ghost_in_row(uint8_t row);
-#endif
-
-
-/*
- * Matrix Array usage:
- * 'Scan Code Set 3' is assigned into 17x8 cell matrix.
- *
- *    8bit wide
- *   +---------+
- *  0|         |
- *  :|         | 0x00-0x87
- *  ;|         |
- * 17|         |
- *   +---------+
- */
-static uint8_t matrix[MATRIX_ROWS];
-#define ROW(code)      (code>>3)
-#define COL(code)      (code&0x07)
-
-static bool is_modified = false;
-
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    debug_enable = true;
-    //debug_matrix = true;
-    //debug_keyboard = true;
-    //debug_mouse = false;
-
-    ps2_host_init();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
-
-    return;
-}
-
-uint8_t matrix_scan(void)
-{
-
-    // scan code reading states
-    static enum {
-        RESET,
-        RESET_RESPONSE,
-        KBD_ID0,
-        KBD_ID1,
-        CONFIG,
-        READY,
-        F0,
-    } state = RESET;
-
-    is_modified = false;
-
-    uint8_t code;
-    if ((code = ps2_host_recv())) {
-        debug("r"); debug_hex(code); debug(" ");
-    }
-
-    switch (state) {
-        case RESET:
-            debug("wFF ");
-            if (ps2_host_send(0xFF) == 0xFA) {
-                debug("[ack]\nRESET_RESPONSE: ");
-                state = RESET_RESPONSE;
-            }
-            break;
-        case RESET_RESPONSE:
-            if (code == 0xAA) {
-                debug("[ok]\nKBD_ID: ");
-                state = KBD_ID0;
-            } else if (code) {
-                debug("err\nRESET: ");
-                state = RESET;
-            }
-            break;
-        // after reset receive keyboad ID(2 bytes)
-        case KBD_ID0:
-            if (code) {
-                state = KBD_ID1;
-            }
-            break;
-        case KBD_ID1:
-            if (code) {
-                debug("\nCONFIG: ");
-                state = CONFIG;
-            }
-            break;
-        case CONFIG:
-            debug("wF8 ");
-            if (ps2_host_send(0xF8) == 0xFA) {
-                debug("[ack]\nREADY\n");
-                state = READY;
-            }
-            break;
-        case READY:
-            switch (code) {
-                case 0x00:
-                    break;
-                case 0xF0:
-                    state = F0;
-                    debug(" ");
-                    break;
-                default:    // normal key make
-                    if (code < 0x88) {
-                        matrix_make(code);
-                    } else {
-                        debug("unexpected scan code at READY: "); debug_hex(code); debug("\n");
-                    }
-                    state = READY;
-                    debug("\n");
-            }
-            break;
-        case F0:    // Break code
-            switch (code) {
-                case 0x00:
-                    break;
-                default:
-                    if (code < 0x88) {
-                        matrix_break(code);
-                    } else {
-                        debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
-                    }
-                    state = READY;
-                    debug("\n");
-            }
-            break;
-    }
-    return 1;
-}
-
-bool matrix_is_modified(void)
-{
-    return is_modified;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
-#ifdef MATRIX_HAS_GHOST
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        if (matrix_has_ghost_in_row(i))
-            return true;
-    }
-#endif
-    return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & (1<<col));
-}
-
-inline
-uint8_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 01234567\n");
-    for (uint8_t row = 0; row < matrix_rows(); row++) {
-        phex(row); print(": ");
-        pbin_reverse(matrix_get_row(row));
-#ifdef MATRIX_HAS_GHOST
-        if (matrix_has_ghost_in_row(row)) {
-            print(" <ghost");
-        }
-#endif
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop(matrix[i]);
-    }
-    return count;
-}
-
-#ifdef MATRIX_HAS_GHOST
-inline
-static bool matrix_has_ghost_in_row(uint8_t row)
-{
-    // no ghost exists in case less than 2 keys on
-    if (((matrix[row] - 1) & matrix[row]) == 0)
-        return false;
-
-    // ghost exists in case same state as other row
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        if (i != row && (matrix[i] & matrix[row]) == matrix[row])
-            return true;
-    }
-    return false;
-}
-#endif
-
-
-inline
-static void matrix_make(uint8_t code)
-{
-    if (!matrix_is_on(ROW(code), COL(code))) {
-        matrix[ROW(code)] |= 1<<COL(code);
-        is_modified = true;
-    }
-}
-
-inline
-static void matrix_break(uint8_t code)
-{
-    if (matrix_is_on(ROW(code), COL(code))) {
-        matrix[ROW(code)] &= ~(1<<COL(code));
-        is_modified = true;
-    }
-}