Change keymaps of M0110

8 files changed, 470 insertions, 237 deletions

diff --git a/converter/m0110_usb/Makefile b/converter/m0110_usb/Makefile
index 7791527e43..ac54945e73 100644
--- a/converter/m0110_usb/Makefile
+++ b/converter/m0110_usb/Makefile
@@ -10,13 +10,14 @@ TARGET_DIR = .
 # keyboard dependent files
 SRC =	matrix.c \
 	led.c \
+	keymap_common.c \
 	m0110.c
 
 # To use own keymap file run make like: make keymap=hasu
-ifdef keymap
-    SRC += keymap_$(keymap).c
+ifdef KEYMAP
+    SRC += keymap_$(KEYMAP).c
 else
-    SRC += keymap.c
+    SRC += keymap_plain.c
 endif
 
 CONFIG_H = config.h
@@ -71,14 +72,14 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   *Comment out* to disable the options.
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
 CONSOLE_ENABLE = yes	# Console for debug(+400)
 COMMAND_ENABLE = yes    # Commands for debug and configuration
 #SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
 #NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
-KEYMAP_SECTION_ENABLE = yes	# fixed address keymap for keymap editor
+#KEYMAP_SECTION_ENABLE = yes	# fixed address keymap for keymap editor
 
 
 
diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md
index 1c344f1ac4..7de36d5de1 100644
--- a/converter/m0110_usb/README.md
+++ b/converter/m0110_usb/README.md
@@ -2,6 +2,8 @@ M0110/M0110A to USB keyboard converter
 ======================================
 This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer.
 
+Read README of top directory too.
+
 Pictures of **M0110 + M0120** and **M0110A**.
 
 ![M0110+M0120](http://i.imgur.com/dyvXb2Tm.jpg)
@@ -17,6 +19,7 @@ Update
 ------
 - 2013/08: Change port for signals `PF` to `PD`
 - 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now.
+- 2014/06: Change keymaps
 
 
 
@@ -54,76 +57,22 @@ To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to
 
     $ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
     $ cd m0110_usb
-    $ make -f Makefile clean
-    $ make -f Makefile
+    $ make clean
+    $ make
+
+To select keymap use `KEYMAP` option.
 
-and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html).
+    $ make clean
+    $ make KEYMAP={plain|spacefn|hasu}
 
 
 
 Keymap
 ------
-You can change keymaps by editing *keymap.c*.
-
-### M0110 & M0120
-#### *Default Layer*
-    ,---------------------------------------------------------.     ,---------------.
-    |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs|     |Clr|  -|Lft|Rgt|
-    |---------------------------------------------------------|     |---------------|
-    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \|     |  7|  8|  9| Up|
-    |---------------------------------------------------------|     |---------------|
-    |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter |     |  4|  5|  6| Dn|
-    |---------------------------------------------------------|     |---------------|
-    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   |     |  1|  2|  3|   |
-    `---------------------------------------------------------'     |-----------|Ent|
-         |Ctl|Gui |         Space               |Alt |Ctl|          |      0|  .|   |
-         `-----------------------------------------------'          `---------------'
-
-- `Space` and  `Enter` also work as `Fn` layer switch key when holding down.
-
-#### *Function Layer(WASD/HHKB)*
-    ,---------------------------------------------------------.     ,---------------.
-    |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet|     |Nlk|  -|Lft|Rgt|
-    |---------------------------------------------------------|     |---------------|
-    |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |Ins|  \|     |  7|  8|  9| Up|
-    |---------------------------------------------------------|     |---------------|
-    |Caps  |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Enter |     |  4|  5|  6| Dn|
-    |---------------------------------------------------------|     |---------------|
-    |Shift   |End|   |PgD|   |   |   |   |End|PgD|Dow|Shift   |     |  1|  2|  3|   |
-    `---------------------------------------------------------'     |-----------|Ent|
-         |Ctl|Gui |         Space               |Alt |Ctl|          |      0|  .|   |
-         `-----------------------------------------------'          `---------------'
-
-
-### M0110A
-#### *Default Layer*
-    ,---------------------------------------------------------. ,---------------.
-    |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  =|  /|  *|
-    |---------------------------------------------------------| |---------------|
-    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
-    |-----------------------------------------------------'   | |---------------|
-    |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter | |  4|  5|  6|  +|
-    |---------------------------------------------------------| |---------------|
-    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft| Up| |  1|  2|  3|   |
-    |---------------------------------------------------------| |-----------|Ent|
-    |Ctrl |Gui    |         Space             |  \|Lft|Rgt|Dwn| |      0|  .|   |
-    `---------------------------------------------------------' `---------------'
-
-- `Space` and  `Enter` also work as `Fn` layer switch key when holding down.
-- `Backslash(\)` also works as `Alt` when holding down.
-
-#### *Function Layer(WASD/HHKB)*
-    ,---------------------------------------------------------. ,---------------.
-    |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|  =|  /|  *|
-    |---------------------------------------------------------| |---------------|
-    |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |Ins|   | |  7|  8|  9|  -|
-    |-----------------------------------------------------'   | |---------------|
-    |Caps  |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Enter | |  4|  5|  6|  +|
-    |---------------------------------------------------------| |---------------|
-    |Shift   |End|   |PgD|   |   |   |   |End|PgD|Dow|Shif|PgU| |  1|  2|  3|   |
-    |---------------------------------------------------------| |-----------|Ent|
-    |Ctrl |Gui    |         Space             |  \|Hom|End|PgD| |      0|  .|   |
-    `---------------------------------------------------------' `---------------'
+To create your own keymap copy existent keymap file to `keymap_name.c` and edit it. You can build it like this.
+
+    $ make clean
+    $ make KEYMAP=name
 
 
 
diff --git a/converter/m0110_usb/keymap_common.c b/converter/m0110_usb/keymap_common.c
new file mode 100644
index 0000000000..bad18c91a8
--- /dev/null
+++ b/converter/m0110_usb/keymap_common.c
@@ -0,0 +1,37 @@
+/*
+Copyright 2011,2012,2014 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <avr/pgmspace.h>
+#include "action.h"
+#include "keycode.h"
+#include "keymap.h"
+#include "keymap_common.h"
+
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
+{
+    return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+/* translates Fn index to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+    action_t action;
+    action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
+    return action;
+}
diff --git a/converter/m0110_usb/keymap_common.h b/converter/m0110_usb/keymap_common.h
new file mode 100644
index 0000000000..e1d47342ef
--- /dev/null
+++ b/converter/m0110_usb/keymap_common.h
@@ -0,0 +1,107 @@
+/*
+Copyright 2011,2012,2014 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "keymap.h"
+
+
+extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+
+/* 
+ * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset
+ * of the M0110 keyboard, with only one exception: 'Enter' in M0110 does not exist
+ * on the M0110A, but since it generates a unique scan code which is not used for some other key in
+ * the M0110A, they are totally interchangeable.  In fact, the M0110A is functionally (almost)
+ * identical to the combination of the M0110 along with the M0120 keypad. The only difference
+ * (which is causing some problems as you will read below) is that the M0110+M0120 don't have
+ * dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which
+ * doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has
+ * substituted the [comma] key with the [=] key, however its scancode is the same.
+ *
+ * Physical layout:
+ * M0110A
+ * ,---------------------------------------------------------. ,---------------.
+ * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Bcksp| |Clr|  =|  /|  *|
+ * |---------------------------------------------------------| |---------------|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
+ * |-----------------------------------------------------'   | |---------------|
+ * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
+ * |---------------------------------------------------------| |---------------|
+ * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
+ * |---------------------------------------------------------' |-----------|Ent|
+ * |Opt  |Mac    |           Space           |  \|Lft|Rgt|Dn | |      0|  .|   |
+ * `---------------------------------------------------------' `---------------'
+ *
+ * M0110                                                       M0120
+ * ,---------------------------------------------------------. ,---------------.
+ * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  -|  +|  *|
+ * |---------------------------------------------------------| |---------------|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \| |  7|  8|  9|  /|
+ * |---------------------------------------------------------| |---------------|
+ * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  ,|
+ * |---------------------------------------------------------| |---------------|
+ * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   | |  1|  2|  3|   |
+ * `---------------------------------------------------------' |-----------|Ent|
+ *      |Opt|Mac |         Space               |Ent |Opt|      |      0|  .|   |
+ *      `-----------------------------------------------'      `---------------'
+ * With Shift keys on M0120 work as curosor.(-:Left *:Right /:Up ,:Down)
+ *
+ * NOTE: \ is located differently.
+ * NOTE: Enter on M0110 is different from Enter on keypad(M0120 and M0110A).
+ * NOTE: Left Shift and right Shift are logically same key.
+ * NOTE: Left Option and right Option are logically same key.
+ */
+
+/* Keymap definition Macro
+ * ,---------------------------------------------------------. ,---------------.
+ * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  =|  /|  *|
+ * |---------------------------------------------------------| |---------------|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
+ * |-----------------------------------------------------'   | |---------------|
+ * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
+ * |---------------------------------------------------------| |---------------|
+ * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
+ * |---------------------------------------------------------| |-----------|Ent|
+ * |Opt  |Mac    |         Space         |Ent|  \|Lft|Rgt|Dn | |      0|  .|   |
+ * `---------------------------------------------------------' `---------------'
+ * NOTE: Ent between Space and \ means Enter on M0110.
+ */
+#define KEYMAP( \
+    K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33,  K47,K68,K6D,K62, \
+    K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,      K59,K5B,K5C,K4E, \
+    K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,    K24,  K56,K57,K58,K66, \
+    K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,        K4D,  K53,K54,K55,K4C, \
+    K3A,K37,            K31,            K34,K2A,K46,K42,K48,  K52,    K41      \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
+    { KC_##K08, KC_##K09, KC_NO,    KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
+    { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
+    { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO,    KC_NO,    KC_##K37 }, \
+    { KC_##K38, KC_##K39, KC_##K3A, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
+    { KC_NO,    KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_NO,    KC_##K46, KC_##K47 }, \
+    { KC_##K48, KC_NO,    KC_NO,    KC_NO,    KC_##K4C, KC_##K4D, KC_##K4E, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
+    { KC_##K58, KC_##K59, KC_NO,    KC_##K5B, KC_##K5C, KC_NO,    KC_NO,    KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##K62, KC_NO,    KC_NO,    KC_NO,    KC_##K66, KC_NO    }, \
+    { KC_##K68, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K6D, KC_NO,    KC_NO    }, \
+}
diff --git a/converter/m0110_usb/keymap_for_editor.c b/converter/m0110_usb/keymap_for_editor.c
new file mode 100644
index 0000000000..d20f298f87
--- /dev/null
+++ b/converter/m0110_usb/keymap_for_editor.c
@@ -0,0 +1,118 @@
+/*
+Copyright 2014 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include "keycode.h"
+#include "keymap_common.h"
+
+
+#ifdef KEYMAP_SECTION_ENABLE
+const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
+#else
+const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+#endif
+    /* Default:
+     * ,---------------------------------------------------------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  =|  /|  *|
+     * |---------------------------------------------------------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
+     * |-----------------------------------------------------'   | |---------------|
+     * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter | |  4|  5|  6|  +|
+     * |---------------------------------------------------------| |---------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
+     * |---------------------------------------------------------| |-----------|Ent|
+     * |Ctl  |Gui    |         Space         |Alt|  \|Lft|Rgt|Dn | |      0|  .|   |
+     * `---------------------------------------------------------' `---------------'
+     */
+    [0] = KEYMAP(
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,    CLR, EQL, PSLS,PAST,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,         P7,  P8,  P9,  PMNS,
+    LCAP,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     FN15,    P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          UP,      P1,  P2,  P3,  PENT,
+    LCTL,LGUI,               FN16,               LALT,FN31,LEFT,RGHT,DOWN,    P0,       PDOT
+    ),
+    /* Cursor Layer(WASD, IJKL)
+     * ,---------------------------------------------------------. ,---------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|  =|  /|  *|
+     * |---------------------------------------------------------| |---------------|
+     * |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |Ins|   | |  7|  8|  9|  -|
+     * |-----------------------------------------------------'   | |---------------|
+     * |Caps  |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Enter | |  4|  5|  6|  +|
+     * |---------------------------------------------------------| |---------------|
+     * |Shift   |End|   |PgD|   |   |   |   |End|PgD|Dow|Shif|PgU| |  1|  2|  3|   |
+     * |---------------------------------------------------------| |-----------|Ent|
+     * |Ctl  |Gui    |         Space        |Alt |  \|Hom|End|PgD| |      0|  .|   |
+     * `---------------------------------------------------------' `---------------'
+     */
+    [3] = KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
+    CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  INS,          P7,  P8,  P9,  PMNS,
+    LCAP,LEFT,DOWN,RGHT,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,     FN15,    P4,  P5,  P6,  PPLS,
+    LSFT,END, NO,  PGDN,NO,  NO,  NO,  NO,  END, PGDN,DOWN,          PGUP,    P1,  P2,  P3,  PENT,
+    LCTL,LGUI,               FN16,               LALT,FN31,HOME,END, PGDN,    P0,       PDOT
+    ),
+    [4] = KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
+    CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  INS,          P7,  P8,  P9,  PMNS,
+    LCAP,LEFT,DOWN,RGHT,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,     FN15,    P4,  P5,  P6,  PPLS,
+    LSFT,END, NO,  PGDN,NO,  NO,  NO,  NO,  END, PGDN,DOWN,          PGUP,    P1,  P2,  P3,  PENT,
+    LCTL,LGUI,               FN16,               LALT,FN31,HOME,END, PGDN,    P0,       PDOT
+    ),
+    [7] = {},
+};
+
+
+/*
+ * Fn action definition
+ */
+#ifdef KEYMAP_SECTION_ENABLE
+const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
+#else
+const uint16_t fn_actions[] PROGMEM = {
+#endif
+    [0]  = ACTION_LAYER_MOMENTARY(1),
+    [1]  = ACTION_LAYER_MOMENTARY(2),
+    [2]  = ACTION_LAYER_MOMENTARY(3),
+    [3]  = ACTION_LAYER_MOMENTARY(4),
+    [4]  = ACTION_LAYER_MOMENTARY(5),
+    [5]  = ACTION_LAYER_MOMENTARY(6),
+    [6]  = ACTION_LAYER_MOMENTARY(7),
+    [7]  = ACTION_LAYER_TOGGLE(1),
+    [8]  = ACTION_LAYER_TOGGLE(2),
+    [9]  = ACTION_LAYER_TOGGLE(3),
+    [10] = ACTION_LAYER_TAP_TOGGLE(1),
+    [11] = ACTION_LAYER_TAP_TOGGLE(2),
+    [12] = ACTION_LAYER_TAP_TOGGLE(3),
+    [13] = ACTION_LAYER_TAP_KEY(1, KC_F),
+    [14] = ACTION_LAYER_TAP_KEY(2, KC_J),
+    [15] = ACTION_LAYER_TAP_KEY(3, KC_ENTER),
+    [16] = ACTION_LAYER_TAP_KEY(4, KC_SPACE),
+    [17] = ACTION_LAYER_TAP_KEY(5, KC_SCOLON),
+    [18] = ACTION_LAYER_TAP_KEY(6, KC_QUOTE),
+    [19] = ACTION_LAYER_TAP_KEY(7, KC_SLASH),
+    [20] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_SPACE),
+    [21] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_SPACE),
+    [22] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_QUOTE),
+    [23] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENTER),
+    [24] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC),
+    [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_BSPACE),
+    [26] = ACTION_MODS_ONESHOT(MOD_LCTL),
+    [27] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_ESC),
+    [28] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPACE),
+    [29] = ACTION_MODS_ONESHOT(MOD_LSFT),
+    [30] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRAVE),
+    [31] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_BSLASH),
+};
diff --git a/converter/m0110_usb/keymap_hasu.c b/converter/m0110_usb/keymap_hasu.c
index 3608dac9e4..11f1a4f394 100644
--- a/converter/m0110_usb/keymap_hasu.c
+++ b/converter/m0110_usb/keymap_hasu.c
@@ -1,5 +1,5 @@
 /*
-Copyright 2011,2012 Jun Wako <wakojun@gmail.com>
+Copyright 2014 Jun Wako <wakojun@gmail.com>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -14,188 +14,74 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-/* M0110A Support was contributed by skagon@github */
-
 #include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
 #include "keycode.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "keymap.h"
-
-
-/* 
- * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset
- * of the M0110 keyboard, with only one exception: 'Enter' in M0110 does not exist
- * on the M0110A, but since it generates a unique scan code which is not used for some other key in
- * the M0110A, they are totally interchangeable.  In fact, the M0110A is functionally (almost)
- * identical to the combination of the M0110 along with the M0120 keypad. The only difference
- * (which is causing some problems as you will read below) is that the M0110+M0120 don't have
- * dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which
- * doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has
- * substituted the [comma] key with the [=] key, however its scancode is the same.
- *
- * Physical layout:
- * M0110A
- * ,---------------------------------------------------------. ,---------------.
- * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Bcksp| |Clr|  =|  /|  *|
- * |---------------------------------------------------------| |---------------|
- * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
- * |-----------------------------------------------------'   | |---------------|
- * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
- * |---------------------------------------------------------| |---------------|
- * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
- * |---------------------------------------------------------' |-----------|Ent|
- * |Opt  |Mac    |           Space           |  \|Lft|Rgt|Dn | |      0|  .|   |
- * `---------------------------------------------------------' `---------------'
- *
- * M0110                                                       M0120
- * ,---------------------------------------------------------. ,---------------.
- * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  -|  +|  *|
- * |---------------------------------------------------------| |---------------|
- * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \| |  7|  8|  9|  /|
- * |---------------------------------------------------------| |---------------|
- * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  ,|
- * |---------------------------------------------------------| |---------------|
- * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   | |  1|  2|  3|   |
- * `---------------------------------------------------------' |-----------|Ent|
- *      |Opt|Mac |         Space               |Ent |Opt|      |      0|  .|   |
- *      `-----------------------------------------------'      `---------------'
- * With Shift keys on M0120 work as curosor.(-:Left *:Right /:Up ,:Down)
- *
- * NOTE: \ is located differently.
- * NOTE: Enter on M0110 is different from Enter on keypad(M0120 and M0110A).
- * NOTE: Left Shift and right Shift are logically same key.
- * NOTE: Left Option and right Option are logically same key.
- */
-
-/* Keymap definition Macro
- * ,---------------------------------------------------------. ,---------------.
- * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  =|  /|  *|
- * |---------------------------------------------------------| |---------------|
- * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
- * |-----------------------------------------------------'   | |---------------|
- * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
- * |---------------------------------------------------------| |---------------|
- * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
- * |---------------------------------------------------------| |-----------|Ent|
- * |Opt  |Mac    |         Space         |Ent|  \|Lft|Rgt|Dn | |      0|  .|   |
- * `---------------------------------------------------------' `---------------'
- * NOTE: Ent between Space and \ means Enter on M0110.
- */
-#define KEYMAP( \
-    K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33,  K47,K68,K6D,K62, \
-    K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,      K59,K5B,K5C,K4E, \
-    K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,    K24,  K56,K57,K58,K66, \
-    K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,        K4D,  K53,K54,K55,K4C, \
-    K3A,K37,            K31,            K34,K2A,K46,K42,K48,  K52,    K41      \
-) { \
-    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
-    { KC_##K08, KC_##K09, KC_NO,    KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
-    { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
-    { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO,    KC_NO,    KC_##K37 }, \
-    { KC_##K38, KC_##K39, KC_##K3A, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_NO,    KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_NO,    KC_##K46, KC_##K47 }, \
-    { KC_##K48, KC_NO,    KC_NO,    KC_NO,    KC_##K4C, KC_##K4D, KC_##K4E, KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
-    { KC_##K58, KC_##K59, KC_NO,    KC_##K5B, KC_##K5C, KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_##K62, KC_NO,    KC_NO,    KC_NO,    KC_##K66, KC_NO    }, \
-    { KC_##K68, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K6D, KC_NO,    KC_NO    }, \
-}
-
-#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
-
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
-    1,              // Fn0
-    2,              // Fn1
-    3,              // Fn2
-    1,              // Fn3
-    2,              // Fn4
-    0,              // Fn5
-    0,              // Fn6
-    0               // Fn7
-};
+#include "keymap_common.h"
 
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
-    KC_ENTER,       // Fn0
-    KC_SCOLON,      // Fn1
-    KC_SLASH,       // Fn2
-    KC_UP,          // Fn3
-    KC_NO,          // Fn4
-    KC_NO,          // Fn5
-    KC_NO,          // Fn6
-    KC_NO           // Fn7
-};
 
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Default:
-     * M0110                                                       M0120
-     * ,---------------------------------------------------------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Gui|  -|  +|  *|
-     * |---------------------------------------------------------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \| |  7|  8|  9|  /|
-     * |---------------------------------------------------------| |---------------|
-     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L| Fn|  '|Return| |  4|  5|  6|  ,|
-     * |---------------------------------------------------------| |---------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,| Fn|Shift   | |  1|  2|  3|   |
-     * `---------------------------------------------------------' |-----------|Ent|
-     *      |Fn |alt |         Space               |Gui |Fn |      |      0|  .|   |
-     *      `-----------------------------------------------'      `---------------'
+     * M0110
+     * ,---------------------------------------------------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs|
+     * |---------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \|
+     * |---------------------------------------------------------|
+     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L| Fn|  '|Return|
+     * |---------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,| Fn|Shift   |
+     * `---------------------------------------------------------'
+     *      |Fn |alt |           Fn                |Gui |Fn |
+     *      `-----------------------------------------------'
      */
-    KEYMAP(
+    [0] = KEYMAP(
     ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,    NLCK,EQL, PSLS,PAST,
     TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,         P7,  P8,  P9,  PMNS,
-    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN1, QUOT,     FN0,     P4,  P5,  P6,  PPLS,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN2,           FN3,     P1,  P2,  P3,  PENT,
-    FN4, LALT,               SPC,                LGUI,BSLS,LGUI,RCTL,RCTL,    LGUI,     PDOT
+    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN3, QUOT,     ENT,     P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN1,           UP,      P1,  P2,  P3,  PENT,
+    FN0, LALT,               FN2,                LGUI,BSLS,LEFT,RGHT,DOWN,    P0,       PDOT
     ),
-    // HHKB & WASD
-    KEYMAP(
+    // IJKL cursor
+    [1] = KEYMAP(
     GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
-    CAPS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,           P7,  P8,  P9,  PMNS,
-    LCTL,VOLD,VOLU,MUTE,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,     FN0,     P4,  P5,  P6,  PPLS,
-    LSFT,NO,  NO,  NO,  NO,  NO,  NO,  NO,  END, PGDN,DOWN,          FN3,     P1,  P2,  P3,  PENT,
-    LCTL,LALT,               SPC,                LGUI,INS, LGUI,RCTL,RCTL,    P0,       PDOT
+    CAPS,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,UP,  PGUP,END, NO,  NO,           P7,  P8,  P9,  PMNS,
+    LCTL,VOLD,VOLU,MUTE,NO,  NO,  HOME,LEFT,DOWN,RGHT,END, NO,       ENT,     P4,  P5,  P6,  PPLS,
+    LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, NO,            PGUP,    P1,  P2,  P3,  PENT,
+    TRNS,LALT,               SPC,                LGUI,BSLS,HOME,END, PGDN,    P0,       PDOT
     ),
-    // vi mousekeys
-    KEYMAP(
+    // HJKL cursor
+    [2] = KEYMAP(
     GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
-    CAPS,NO,  NO,  NO,  NO,  NO,  WH_L,WH_D,WH_U,WH_R,PSCR,SLCK,PAUS,         P7,  P8,  P9,  PMNS,
-    LCTL,VOLD,VOLU,MUTE,NO,  NO,  MS_L,MS_D,MS_U,MS_R,FN1, NO,       ENT,     P4,  P5,  P6,  PPLS,
-    LSFT,NO,  NO,  NO,  NO,  BTN3,BTN2,BTN1,NO,  NO,  NO,            NO,      P1,  P2,  P3,  PENT,
-    FN4, LALT,               BTN1,               LGUI,NO,  LGUI,RCTL,RCTL,    P0,       PDOT
+    CAPS,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,UP,  PGUP,END, NO,  NO,           P7,  P8,  P9,  PMNS,
+    LCTL,VOLD,VOLU,MUTE,NO,  NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,       ENT,     P4,  P5,  P6,  PPLS,
+    LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, TRNS,          PGUP,    P1,  P2,  P3,  PENT,
+    TRNS,LALT,               SPC,                LGUI,BSLS,HOME,END, PGDN,    P0,       PDOT
     ),
-    // vi cusorkeys
-    KEYMAP(
+    // Mousekey
+    [3] = KEYMAP(
     GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
-    CAPS,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, PSCR,SLCK,PAUS,         P7,  P8,  P9,  PMNS,
-    LCTL,NO,  NO,  NO,  NO,  NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,       ENT,     P4,  P5,  P6,  PPLS,
-    LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN2,           NO,      P1,  P2,  P3,  PENT,
-    LCTL,LALT,               SPC,                LGUI,INS, LGUI,RCTL,RCTL,    P0,       PDOT
+    CAPS,Q,   W,   E,   R,   T,   WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD,         P7,  P8,  P9,  PMNS,
+    LCTL,VOLD,VOLU,MUTE,NO,  NO,  BTN2,MS_L,MS_D,MS_R,BTN1,NO,       ENT,     P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   BTN2,BTN1,BTN4,BTN5,NO,            PGUP,    P1,  P2,  P3,  PENT,
+    NO,  LALT,               TRNS,               LGUI,BSLS,HOME,END, PGDN,    P0,       PDOT
+    ),
+    // Mousekey
+    [4] = KEYMAP(
+    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
+    CAPS,Q,   W,   E,   R,   T,   WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD,         P7,  P8,  P9,  PMNS,
+    LCTL,VOLD,VOLU,MUTE,NO,  NO,  BTN2,MS_L,MS_D,MS_R,TRNS,NO,       ENT,     P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   BTN2,BTN1,BTN4,BTN5,NO,            PGUP,    P1,  P2,  P3,  PENT,
+    NO,  LALT,               BTN1,               LGUI,BSLS,HOME,END, PGDN,    P0,       PDOT
     ),
 };
 
 
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
-    return KEYCODE(layer, row, col);
-}
-
-uint8_t keymap_fn_layer(uint8_t index)
-{
-    return pgm_read_byte(&fn_layer[index]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t index)
-{
-    return pgm_read_byte(&fn_keycode[index]);
-}
+/*
+ * Fn action definition
+ */
+const uint16_t fn_actions[] PROGMEM = {
+    [0]  = ACTION_LAYER_MOMENTARY(1),
+    [1]  = ACTION_LAYER_TAP_KEY(2, KC_SLASH),
+    [2]  = ACTION_LAYER_TAP_KEY(3, KC_SPACE),
+    [3]  = ACTION_LAYER_TAP_KEY(4, KC_SCOLON),
+};
diff --git a/converter/m0110_usb/keymap_plain.c b/converter/m0110_usb/keymap_plain.c
new file mode 100644
index 0000000000..f262dca224
--- /dev/null
+++ b/converter/m0110_usb/keymap_plain.c
@@ -0,0 +1,64 @@
+/*
+Copyright 2014 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include "keycode.h"
+#include "keymap_common.h"
+
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Default:
+     * M0110                                                       M0120
+     * ,---------------------------------------------------------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Nlk|  -|  +|  *|
+     * |---------------------------------------------------------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \| |  7|  8|  9|  /|
+     * |---------------------------------------------------------| |---------------|
+     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  ,|
+     * |---------------------------------------------------------| |---------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   | |  1|  2|  3|   |
+     * `---------------------------------------------------------' |-----------|Ent|
+     *      |Opt|Mac |         Space               |Mac |Opt|      |      0|  .|   |
+     *      `-----------------------------------------------'      `---------------'
+     *  M0110A
+     * ,---------------------------------------------------------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Bcksp| |Nlk|  =|  /|  *|
+     * |---------------------------------------------------------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
+     * |-----------------------------------------------------'   | |---------------|
+     * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
+     * |---------------------------------------------------------| |---------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
+     * |---------------------------------------------------------' |-----------|Ent|
+     * |Opt  |Mac    |           Space           |  \|Lft|Rgt|Dn | |      0|  .|   |
+     * `---------------------------------------------------------' `---------------'
+     */
+    [0] = KEYMAP(
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,    NLCK,PEQL,PSLS,PAST,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,         P7,  P8,  P9,  PMNS,
+    LCAP,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN