[Keyboard] Add Switchplate 910 keyboard (#13235)

Co-authored-by: Ryan <fauxpark@gmail.com>

10 files changed, 581 insertions, 0 deletions

diff --git a/keyboards/switchplate/switchplate910/config.h b/keyboards/switchplate/switchplate910/config.h
new file mode 100644
index 0000000000..81f8254703
--- /dev/null
+++ b/keyboards/switchplate/switchplate910/config.h
@@ -0,0 +1,87 @@
+/*
+Copyright 2021 Stefan Karsch
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x54F3
+#define PRODUCT_ID      0x2065
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Switchplate Peripherals
+#define PRODUCT         910
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F4, F5, F6, F7, D1 }
+#define MATRIX_COL_PINS { D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, B3, B2, B0, B1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/switchplate/switchplate910/info.json b/keyboards/switchplate/switchplate910/info.json
new file mode 100644
index 0000000000..bbdcd3da00
--- /dev/null
+++ b/keyboards/switchplate/switchplate910/info.json
@@ -0,0 +1,297 @@
+{
+    "keyboard_name": "southpaw910",
+    "url": "",
+    "maintainer": "MxBluE",
+    "width": 22.5,
+    "height": 6.25,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {
+                    "x": 0,
+                    "y": 0
+                },
+                {
+                    "x": 1,
+                    "y": 0
+                },
+                {
+                    "x": 2,
+                    "y": 0
+                },
+                {
+                    "x": 3,
+                    "y": 0
+                },
+                {
+                    "x": 4,
+                    "y": 0
+                },
+                {
+                    "x": 5,
+                    "y": 0
+                },
+                {
+                    "x": 6,
+                    "y": 0
+                },
+                {
+                    "x": 7,
+                    "y": 0
+                },
+                {
+                    "x": 8,
+                    "y": 0
+                },
+                {
+                    "x": 9,
+                    "y": 0
+                },
+                {
+                    "x": 10,
+                    "y": 0
+                },
+                {
+                    "x": 11,
+                    "y": 0
+                },
+                {
+                    "x": 12,
+                    "y": 0
+                },
+                {
+                    "x": 13,
+                    "y": 0
+                },
+                {
+                    "x": 14,
+                    "y": 0
+                },
+                {
+                    "x": 15,
+                    "y": 0
+                },
+                {
+                    "x": 0,
+                    "y": 1,
+                    "w": 1.5
+                },
+                {
+                    "x": 1.5,
+                    "y": 1
+                },
+                {
+                    "x": 2.5,
+                    "y": 1
+                },
+                {
+                    "x": 3.5,
+                    "y": 1
+                },
+                {
+                    "x": 4.5,
+                    "y": 1
+                },
+                {
+                    "x": 5.5,
+                    "y": 1
+                },
+                {
+                    "x": 6.5,
+                    "y": 1
+                },
+                {
+                    "x": 7.5,
+                    "y": 1
+                },
+                {
+                    "x": 8.5,
+                    "y": 1
+                },
+                {
+                    "x": 9.5,
+                    "y": 1
+                },
+                {
+                    "x": 10.5,
+                    "y": 1
+                },
+                {
+                    "x": 11.5,
+                    "y": 1
+                },
+                {
+                    "x": 12.5,
+                    "y": 1
+                },
+                {
+                    "x": 13.5,
+                    "y": 1,
+                    "w": 1.5
+                },
+                {
+                    "x": 15,
+                    "y": 1
+                },
+                {
+                    "x": 0,
+                    "y": 2,
+                    "w": 1.75
+                },
+                {
+                    "x": 1.75,
+                    "y": 2
+                },
+                {
+                    "x": 2.75,
+                    "y": 2
+                },
+                {
+                    "x": 3.75,
+                    "y": 2
+                },
+                {
+                    "x": 4.75,
+                    "y": 2
+                },
+                {
+                    "x": 5.75,
+                    "y": 2
+                },
+                {
+                    "x": 6.75,
+                    "y": 2
+                },
+                {
+                    "x": 7.75,
+                    "y": 2
+                },
+                {
+                    "x": 8.75,
+                    "y": 2
+                },
+                {
+                    "x": 9.75,
+                    "y": 2
+                },
+                {
+                    "x": 10.75,
+                    "y": 2
+                },
+                {
+                    "x": 11.75,
+                    "y": 2
+                },
+                {
+                    "x": 12.75,
+                    "y": 2,
+                    "w": 2.25
+                },
+                {
+                    "x": 15,
+                    "y": 2
+                },
+                {
+                    "x": 0,
+                    "y": 3,
+                    "w": 2.25
+                },
+                {
+                    "x": 2.25,
+                    "y": 3
+                },
+                {
+                    "x": 3.25,
+                    "y": 3
+                },
+                {
+                    "x": 4.25,
+                    "y": 3
+                },
+                {
+                    "x": 5.25,
+                    "y": 3
+                },
+                {
+                    "x": 6.25,
+                    "y": 3
+                },
+                {
+                    "x": 7.25,
+                    "y": 3
+                },
+                {
+                    "x": 8.25,
+                    "y": 3
+                },
+                {
+                    "x": 9.25,
+                    "y": 3
+                },
+                {
+                    "x": 10.25,
+                    "y": 3
+                },
+                {
+                    "x": 11.25,
+                    "y": 3
+                },
+                {
+                    "x": 12.25,
+                    "y": 3,
+                    "w": 1.75
+                },
+                {
+                    "x": 14,
+                    "y": 3
+                },
+                {
+                    "x": 15,
+                    "y": 3
+                },
+                {
+                    "x": 0,
+                    "y": 4,
+                    "w": 1.25
+                },
+                {
+                    "x": 1.25,
+                    "y": 4,
+                    "w": 1.25
+                },
+                {
+                    "x": 2.5,
+                    "y": 4,
+                    "w": 1.25
+                },
+                {
+                    "x": 3.75,
+                    "y": 4,
+                    "w": 6.25
+                },
+                {
+                    "x": 10,
+                    "y": 4,
+                    "w": 1.25
+                },
+                {
+                    "x": 11.25,
+                    "y": 4,
+                    "w": 1.25
+                },
+                {
+                    "x": 13,
+                    "y": 4
+                },
+                {
+                    "x": 14,
+                    "y": 4
+                },
+                {
+                    "x": 15,
+                    "y": 4
+                }
+            ]
+        }
+    }
+}
diff --git a/keyboards/switchplate/switchplate910/keymaps/default/keymap.c b/keyboards/switchplate/switchplate910/keymaps/default/keymap.c
new file mode 100644
index 0000000000..5277a0dc00
--- /dev/null
+++ b/keyboards/switchplate/switchplate910/keymaps/default/keymap.c
@@ -0,0 +1,40 @@
+/* Copyright 2021 Stefan Karsch
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	LAYOUT_all( /* Base */
+	KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_TRNS,
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+    KC_CAPSLOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+    KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+    KC_LCTL, KC_LGUI, KC_LALT,           KC_SPACE,           KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
+),
+
+    LAYOUT_all( /* L1 */
+	KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_TRNS,
+    KC_TRNS, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI,
+    RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, RGB_MOD, RGB_SAI, RGB_TOG,
+    KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS,           KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI
+),
+};
diff --git a/keyboards/switchplate/switchplate910/keymaps/default/readme.md b/keyboards/switchplate/switchplate910/keymaps/default/readme.md
new file mode 100644
index 0000000000..19ca528e96
--- /dev/null
+++ b/keyboards/switchplate/switchplate910/keymaps/default/readme.md
@@ -0,0 +1,3 @@
+# The default keymap for Switchplate910
+
+Nothing special
\ No newline at end of file
diff --git a/keyboards/switchplate/switchplate910/keymaps/via/keymap.c b/keyboards/switchplate/switchplate910/keymaps/via/keymap.c
new file mode 100644
index 0000000000..c278772543
--- /dev/null
+++ b/keyboards/switchplate/switchplate910/keymaps/via/keymap.c
@@ -0,0 +1,57 @@
+/* Copyright 2021 Stefan Karsch
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	LAYOUT_all( /* Base */
+	KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_TRNS,
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+    KC_CAPSLOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+    KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+    KC_LCTL, KC_LGUI, KC_LALT,           KC_SPACE,           KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
+),
+
+    LAYOUT_all( /* L1 */
+	KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_TRNS,
+    KC_TRNS, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI,
+    RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, RGB_MOD, RGB_SAI, RGB_TOG,
+    KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS,           KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI
+),
+
+    LAYOUT_all( /* L2 */
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS,           KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+),
+
+    LAYOUT_all( /* L3 */
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS,           KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+)
+
+};
diff --git a/keyboards/switchplate/switchplate910/keymaps/via/rules.mk b/keyboards/switchplate/switchplate910/keymaps/via/rules.mk
new file mode 100644
index 0000000000..1e5b99807c
--- /dev/null
+++ b/keyboards/switchplate/switchplate910/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
diff --git a/keyboards/switchplate/switchplate910/readme.md b/keyboards/switchplate/switchplate910/readme.md
new file mode 100644
index 0000000000..199a8c117b
--- /dev/null
+++ b/keyboards/switchplate/switchplate910/readme.md
@@ -0,0 +1,13 @@
+# Switchplate910
+
+Acoustic cut PCB for the TGR 910  
+
+* Keyboard Maintainer: [Switchplate Peripherals](https://switchplate.co/)/[ai03](https://github.com/ai03-2725)
+* Hardware Supported: Switchplate910 PCB
+* Hardware Availability: GB
+
+Make example for this keyboard (after setting up your build environment):
+
+    make switchplate/switchplate910:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/switchplate/switchplate910/rules.mk b/keyboards/switchplate/switchplate910/rules.mk
new file mode 100644
index 0000000000..6e53d4cab2
--- /dev/null
+++ b/keyboards/switchplate/switchplate910/rules.mk
@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
diff --git a/keyboards/switchplate/switchplate910/switchplate910.c b/keyboards/switchplate/switchplate910/switchplate910.c
new file mode 100644
index 0000000000..fce0d30723
--- /dev/null
+++ b/keyboards/switchplate/switchplate910/switchplate910.c
@@ -0,0 +1,18 @@
+/* Copyright 2021 Stefan Karsch
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "switchplate910.h"
+
diff --git a/keyboards/switchplate/switchplate910/switchplate910.h b/keyboards/switchplate/switchplate910/switchplate910.h
new file mode 100644
index 0000000000..7142ec7793
--- /dev/null
+++ b/keyboards/switchplate/switchplate910/switchplate910.h
@@ -0,0 +1,43 @@
+/* Copyright 2021 Stefan Karsch
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define LAYOUT_all( \
+	K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014, K213, \
+	K100,    K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,    K113,    K114, \
+	K200,     K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,        K212,      K214, \
+	K300,      K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,      K311,      K312,   K314, \
+	K400,  K401,  K402,                    K405,                      K408,  K409,           K411,  K412,   K414  \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014  }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114  }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214  }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, K314  }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, K405,  KC_NO, KC_NO, K408,  K409,  KC_NO, K411,  K412,  KC_NO, K414  }  \
+}