Revert "Fixing K-type RGB lighting (#11551)" (#12065)

This reverts commit e6f7da403676b491ac278d5b793d18a0d114477e.

14 files changed, 103 insertions, 1058 deletions

diff --git a/keyboards/k_type/i2c_master.c b/keyboards/k_type/i2c_master.c
deleted file mode 100644
index 72d835a604..0000000000
--- a/keyboards/k_type/i2c_master.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* Copyright 2018 Jack Humbert
- * Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/* This library is only valid for STM32 processors.
- * This library follows the convention of the AVR i2c_master library.
- * As a result addresses are expected to be already shifted (addr << 1).
- * I2CD1 is the default driver which corresponds to pins B6 and B7. This
- * can be changed.
- * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
- * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
- * but using any other I2C pins should be trivial.
- */
-#include "quantum.h"
-#include "i2c_master.h"
-#include "print.h"
-#include <string.h>
-#include <hal.h>
-
-static uint8_t i2c_address;
-
-I2CDriver *drivers[I2C_COUNT];
-
-static const I2CConfig i2cconfig = {
-#if defined(USE_I2CV1_CONTRIB)
-    I2C1_CLOCK_SPEED,
-#elif defined(USE_I2CV1)
-    I2C1_OPMODE,
-    I2C1_CLOCK_SPEED,
-    I2C1_DUTY_CYCLE,
-#else
-    // This configures the I2C clock to 400khz assuming a 72Mhz clock
-    // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
-    STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
-#endif
-};
-
-static i2c_status_t chibios_to_qmk(const msg_t* status) {
-    switch (*status) {
-        case I2C_NO_ERROR:
-            return I2C_STATUS_SUCCESS;
-        case I2C_TIMEOUT:
-            return I2C_STATUS_TIMEOUT;
-        // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
-        default:
-            return I2C_STATUS_ERROR;
-    }
-}
-
-__attribute__((weak)) void i2c_init(I2CDriver *driver, ioportid_t scl_port, ioportid_t sda_port, iopadid_t scl_pad, iopadid_t sda_pad) {
-    static uint8_t index = 0;
-    if (index < I2C_COUNT) {
-        
-        // Try releasing special pins for a short time
-        palSetPadMode(scl_port, scl_pad, PAL_MODE_INPUT);
-        palSetPadMode(sda_port, sda_pad, PAL_MODE_INPUT);
-
-        chThdSleepMilliseconds(10);
-
-#if defined(USE_GPIOV1)
-        palSetPadMode(scl_port, scl_pad, I2C1_SCL_PAL_MODE);
-        palSetPadMode(sda_port, sda_pad, I2C1_SDA_PAL_MODE);
-#else
-        palSetPadMode(scl_port, scl_pad, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
-        palSetPadMode(sda_port, sda_pad, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
-#endif
-
-        drivers[index++] = driver;
-    }
-}
-
-i2c_status_t i2c_start(uint8_t index, uint8_t address) {
-    if(index >= I2C_COUNT) {
-        return I2C_STATUS_ERROR;
-    }
-    i2c_address = address;
-    i2cStart(drivers[index], &i2cconfig);
-    return I2C_STATUS_SUCCESS;
-}
-
-i2c_status_t i2c_transmit(uint8_t index, uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
-    if(index >= I2C_COUNT) {
-        return I2C_STATUS_ERROR;
-    }
-    i2c_address = address;
-    i2cStart(drivers[index], &i2cconfig);
-    msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), data, length, 0, 0, TIME_MS2I(timeout));
-    return chibios_to_qmk(&status);
-}
-
-i2c_status_t i2c_receive(uint8_t index, uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
-    if(index >= I2C_COUNT) {
-        return I2C_STATUS_ERROR;
-    }
-    i2c_address = address;
-    i2cStart(drivers[index], &i2cconfig);
-    msg_t status = i2cMasterReceiveTimeout(drivers[index], (i2c_address >> 1), data, length, TIME_MS2I(timeout));
-    return chibios_to_qmk(&status);
-}
-
-i2c_status_t i2c_writeReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
-    if(index >= I2C_COUNT) {
-        return I2C_STATUS_ERROR;
-    }
-    i2c_address = devaddr;
-    i2cStart(drivers[index], &i2cconfig);
-
-    uint8_t complete_packet[length + 1];
-    for (uint8_t i = 0; i < length; i++) {
-        complete_packet[i + 1] = data[i];
-    }
-    complete_packet[0] = regaddr;
-
-    msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), complete_packet, length + 1, 0, 0, TIME_MS2I(timeout));
-    return chibios_to_qmk(&status);
-}
-
-i2c_status_t i2c_readReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
-    if(index >= I2C_COUNT) {
-        return I2C_STATUS_ERROR;
-    }
-    i2c_address = devaddr;
-    i2cStart(drivers[index], &i2cconfig);
-    msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), &regaddr, 1, data, length, TIME_MS2I(timeout));
-    return chibios_to_qmk(&status);
-}
-
-void i2c_stop(uint8_t index) {
-    if(index < I2C_COUNT) {
-        i2cStop(drivers[index]);
-    }
-}
diff --git a/keyboards/k_type/i2c_master.h b/keyboards/k_type/i2c_master.h
deleted file mode 100644
index 5a7893fae8..0000000000
--- a/keyboards/k_type/i2c_master.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* Copyright 2018 Jack Humbert
- * Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/* This library follows the convention of the AVR i2c_master library.
- * As a result addresses are expected to be already shifted (addr << 1).
- * I2CD1 is the default driver which corresponds to pins B6 and B7. This
- * can be changed.
- * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
- * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
- */
-#pragma once
-
-#include <ch.h>
-#include <hal.h>
-
-#ifndef I2C_COUNT
-#    define I2C_COUNT 1
-#endif
-
-#ifdef I2C1_BANK
-#    define I2C1_SCL_BANK I2C1_BANK
-#    define I2C1_SDA_BANK I2C1_BANK
-#endif
-
-#ifndef I2C1_SCL_BANK
-#    define I2C1_SCL_BANK GPIOB
-#endif
-
-#ifndef I2C1_SDA_BANK
-#    define I2C1_SDA_BANK GPIOB
-#endif
-
-
-#ifdef USE_I2C2
-#    ifdef I2C2_BANK
-#        define I2C2_SCL_BANK I2C2_BANK
-#        define I2C2_SDA_BANK I2C2_BANK
-#    endif
-#    ifndef I2C2_SCL_BANK
-#        define I2C2_SCL_BANK GPIOC
-#    endif
-#    ifndef I2C2_SDA_BANK
-#        define I2C2_SDA_BANK GPIOC
-#    endif
-#endif
-
-#ifndef I2C1_SCL
-#    define I2C1_SCL 6
-#endif
-#ifndef I2C1_SDA
-#    define I2C1_SDA 7
-#endif
-
-#ifdef USE_I2CV1
-#    ifndef I2C1_OPMODE
-#        define I2C1_OPMODE OPMODE_I2C
-#    endif
-#    ifndef I2C1_CLOCK_SPEED
-#        define I2C1_CLOCK_SPEED 100000 /* 400000 */
-#    endif
-#    ifndef I2C1_DUTY_CYCLE
-#        define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
-#    endif
-#else
-// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
-// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
-#    ifndef I2C1_TIMINGR_PRESC
-#        define I2C1_TIMINGR_PRESC 0U
-#    endif
-#    ifndef I2C1_TIMINGR_SCLDEL
-#        define I2C1_TIMINGR_SCLDEL 7U
-#    endif
-#    ifndef I2C1_TIMINGR_SDADEL
-#        define I2C1_TIMINGR_SDADEL 0U
-#    endif
-#    ifndef I2C1_TIMINGR_SCLH
-#        define I2C1_TIMINGR_SCLH 38U
-#    endif
-#    ifndef I2C1_TIMINGR_SCLL
-#        define I2C1_TIMINGR_SCLL 129U
-#    endif
-#endif
-
-#ifdef USE_GPIOV1
-#    ifndef I2C1_SCL_PAL_MODE
-#        define I2C1_SCL_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
-#    endif
-#    ifndef I2C1_SDA_PAL_MODE
-#        define I2C1_SDA_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
-#    endif
-#else
-// The default PAL alternate modes are used to signal that the pins are used for I2C
-#    ifndef I2C1_SCL_PAL_MODE
-#        define I2C1_SCL_PAL_MODE 4
-#    endif
-#    ifndef I2C1_SDA_PAL_MODE
-#        define I2C1_SDA_PAL_MODE 4
-#    endif
-#endif
-
-typedef int16_t i2c_status_t;
-
-#define I2C_STATUS_SUCCESS (0)
-#define I2C_STATUS_ERROR (-1)
-#define I2C_STATUS_TIMEOUT (-2)
-
-void         i2c_init(I2CDriver *driver, ioportid_t scl_port, ioportid_t sda_port, iopadid_t scl_pad, iopadid_t sda_pad);
-i2c_status_t i2c_start(uint8_t index, uint8_t address);
-i2c_status_t i2c_transmit(uint8_t index, uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout);
-i2c_status_t i2c_receive(uint8_t index, uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
-i2c_status_t i2c_writeReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
-i2c_status_t i2c_readReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-void         i2c_stop(uint8_t index);
diff --git a/keyboards/k_type/is31fl3733.c b/keyboards/k_type/is31fl3733.c
deleted file mode 100644
index 8818a622bc..0000000000
--- a/keyboards/k_type/is31fl3733.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/* Copyright 2017 Jason Williams
- * Copyright 2018 Jack Humbert
- * Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "is31fl3733.h"
-#include "i2c_master.h"
-#include "wait.h"
-
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 00 <-> GND
-// 01 <-> SCL
-// 10 <-> SDA
-// 11 <-> VCC
-// ADDR1 represents A1:A0 of the 7-bit address.
-// ADDR2 represents A3:A2 of the 7-bit address.
-// The result is: 0b101(ADDR2)(ADDR1)
-#define ISSI_ADDR_DEFAULT 0x50
-
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
-#define ISSI_INTERRUPTMASKREGISTER 0xF0
-#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
-
-#define ISSI_PAGE_LEDCONTROL 0x00  // PG0
-#define ISSI_PAGE_PWM 0x01         // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02  // PG2
-#define ISSI_PAGE_FUNCTION 0x03    // PG3
-
-#define ISSI_REG_CONFIGURATION 0x00  // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01  // PG3
-#define ISSI_REG_RESET 0x11          // PG3
-#define ISSI_REG_SWPULLUP 0x0F       // PG3
-#define ISSI_REG_CSPULLUP 0x10       // PG3
-
-#ifndef ISSI_TIMEOUT
-#    define ISSI_TIMEOUT 100
-#endif
-
-#ifndef ISSI_PERSISTENCE
-#    define ISSI_PERSISTENCE 0
-#endif
-
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
-
-// These buffers match the IS31FL3733 PWM registers.
-// The control buffers match the PG0 LED On/Off registers.
-// Storing them like this is optimal for I2C transfers to the registers.
-// We could optimize this and take out the unused registers from these
-// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
-// probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
-
-uint8_t g_led_control_registers[DRIVER_COUNT][24]             = {{0}, {0}};
-bool    g_led_control_registers_update_required[DRIVER_COUNT] = {false};
-
-bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data) {
-    // If the transaction fails function returns false.
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
-
-#if ISSI_PERSISTENCE > 0
-    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
-            return false;
-        }
-    }
-#else
-    if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
-        return false;
-    }
-#endif
-    return true;
-}
-
-bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer) {
-    // Assumes PG1 is already selected.
-    // If any of the transactions fails function returns false.
-    // Transmit PWM registers in 12 transfers of 16 bytes.
-    // g_twi_transfer_buffer[] is 20 bytes
-
-    // Iterate over the pwm_buffer contents at 16 byte intervals.
-    for (int i = 0; i < 192; i += 16) {
-        g_twi_transfer_buffer[0] = i;
-        // Copy the data from i to i+15.
-        // Device will auto-increment register for data after the first byte
-        // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
-        for (int j = 0; j < 16; j++) {
-            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
-        }
-
-#if ISSI_PERSISTENCE > 0
-        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-            if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
-                return false;
-            }
-        }
-#else
-        if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
-            return false;
-        }
-#endif
-    }
-    return true;
-}
-
-void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync) {
-    // In order to avoid the LEDs being driven with garbage data
-    // in the LED driver's PWM registers, shutdown is enabled last.
-    // Set up the mode and other settings, clear the PWM registers,
-    // then disable software shutdown.
-    // Sync is passed so set it according to the datasheet.
-
-    // Unlock the command register.
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-    // Select PG0
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
-    // Turn off all LEDs.
-    for (int i = 0x00; i <= 0x17; i++) {
-        IS31FL3733_write_register(bus, addr, i, 0x00);
-    }
-    // Unlock the command register.
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-    // Select PG1
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
-    // Set PWM on all LEDs to 0
-    // No need to setup Breath registers to PWM as that is the default.
-    for (int i = 0x00; i <= 0xBF; i++) {
-        IS31FL3733_write_register(bus, addr, i, 0x00);
-    }
-    // Unlock the command register.
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-    // Select PG3
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
-    // Set global current to maximum.
-    IS31FL3733_write_register(bus, addr, ISSI_REG_GLOBALCURRENT, 0xFF);
-    // Disable software shutdown.
-    IS31FL3733_write_register(bus, addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01);
-    // Wait 10ms to ensure the device has woken up.
-    wait_ms(10);
-}
-
-void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
-    if (index >= 0 && index < DRIVER_LED_TOTAL) {
-        is31_led led = g_is31_leds[index];
-
-        g_pwm_buffer[led.driver][led.r]          = red;
-        g_pwm_buffer[led.driver][led.g]          = green;
-        g_pwm_buffer[led.driver][led.b]          = blue;
-        g_pwm_buffer_update_required[led.driver] = true;
-    }
-}
-
-void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
-    for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
-        IS31FL3733_set_color(i, red, green, blue);
-    }
-}
-
-void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
-    is31_led led = g_is31_leds[index];
-
-    uint8_t control_register_r = led.r / 8;
-    uint8_t control_register_g = led.g / 8;
-    uint8_t control_register_b = led.b / 8;
-    uint8_t bit_r              = led.r % 8;
-    uint8_t bit_g              = led.g % 8;
-    uint8_t bit_b              = led.b % 8;
-
-    if (red) {
-        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
-    } else {
-        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
-    }
-    if (green) {
-        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
-    } else {
-        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
-    }
-    if (blue) {
-        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
-    } else {
-        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
-    }
-
-    g_led_control_registers_update_required[led.driver] = true;
-}
-
-void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
-    if (g_pwm_buffer_update_required[index]) {
-        // Firstly we need to unlock the command register and select PG1.
-        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
-
-        // If any of the transactions fail we risk writing dirty PG0,
-        // refresh page 0 just in case.
-        if (!IS31FL3733_write_pwm_buffer(index, addr, g_pwm_buffer[index])) {
-            g_led_control_registers_update_required[index] = true;
-        }
-    }
-    g_pwm_buffer_update_required[index] = false;
-}
-
-void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index) {
-    if (g_led_control_registers_update_required[index]) {
-        // Firstly we need to unlock the command register and select PG0
-        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
-        for (int i = 0; i < 24; i++) {
-            IS31FL3733_write_register(index, addr, i, g_led_control_registers[index][i]);
-        }
-    }
-    g_led_control_registers_update_required[index] = false;
-}
diff --git a/keyboards/k_type/is31fl3733.h b/keyboards/k_type/is31fl3733.h
deleted file mode 100644
index 272bcdc417..0000000000
--- a/keyboards/k_type/is31fl3733.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/* Copyright 2017 Jason Williams
- * Copyright 2018 Jack Humbert
- * Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include <stdint.h>
-#include <stdbool.h>
-
-typedef struct is31_led {
-    uint8_t driver : 2;
-    uint8_t r;
-    uint8_t g;
-    uint8_t b;
-} __attribute__((packed)) is31_led;
-
-extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
-
-void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync);
-bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data);
-bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer);
-
-void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
-void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
-
-void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
-
-// This should not be called from an interrupt
-// (eg. from a timer interrupt).
-// Call this while idle (in between matrix scans).
-// If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); // index is the driver index
-void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index);
-
-#define A_1 0x00
-#define A_2 0x01
-#define A_3 0x02
-#define A_4 0x03
-#define A_5 0x04
-#define A_6 0x05
-#define A_7 0x06
-#define A_8 0x07
-#define A_9 0x08
-#define A_10 0x09
-#define A_11 0x0A
-#define A_12 0x0B
-#define A_13 0x0C
-#define A_14 0x0D
-#define A_15 0x0E
-#define A_16 0x0F
-
-#define B_1 0x10
-#define B_2 0x11
-#define B_3 0x12
-#define B_4 0x13
-#define B_5 0x14
-#define B_6 0x15
-#define B_7 0x16
-#define B_8 0x17
-#define B_9 0x18
-#define B_10 0x19
-#define B_11 0x1A
-#define B_12 0x1B
-#define B_13 0x1C
-#define B_14 0x1D
-#define B_15 0x1E
-#define B_16 0x1F
-
-#define C_1 0x20
-#define C_2 0x21
-#define C_3 0x22
-#define C_4 0x23
-#define C_5 0x24
-#define C_6 0x25
-#define C_7 0x26
-#define C_8 0x27
-#define C_9 0x28
-#define C_10 0x29
-#define C_11 0x2A
-#define C_12 0x2B
-#define C_13 0x2C
-#define C_14 0x2D
-#define C_15 0x2E
-#define C_16 0x2F
-
-#define D_1 0x30
-#define D_2 0x31
-#define D_3 0x32
-#define D_4 0x33
-#define D_5 0x34
-#define D_6 0x35
-#define D_7 0x36
-#define D_8 0x37
-#define D_9 0x38
-#define D_10 0x39
-#define D_11 0x3A
-#define D_12 0x3B
-#define D_13 0x3C
-#define D_14 0x3D
-#define D_15 0x3E
-#define D_16 0x3F
-
-#define E_1 0x40
-#define E_2 0x41
-#define E_3 0x42
-#define E_4 0x43
-#define E_5 0x44
-#define E_6 0x45
-#define E_7 0x46
-#define E_8 0x47
-#define E_9 0x48
-#define E_10 0x49
-#define E_11 0x4A
-#define E_12 0x4B
-#define E_13 0x4C
-#define E_14 0x4D
-#define E_15 0x4E
-#define E_16 0x4F
-
-#define F_1 0x50
-#define F_2 0x51
-#define F_3 0x52
-#define F_4 0x53
-#define F_5 0x54
-#define F_6 0x55
-#define F_7 0x56
-#define F_8 0x57
-#define F_9 0x58
-#define F_10 0x59
-#define F_11 0x5A
-#define F_12 0x5B
-#define F_13 0x5C
-#define F_14 0x5D
-#define F_15 0x5E
-#define F_16 0x5F
-
-#define G_1 0x60
-#define G_2 0x61
-#define G_3 0x62
-#define G_4 0x63
-#define G_5 0x64
-#define G_6 0x65
-#define G_7 0x66
-#define G_8 0x67
-#define G_9 0x68
-#define G_10 0x69
-#define G_11 0x6A
-#define G_12 0x6B
-#define G_13 0x6C
-#define G_14 0x6D
-#define G_15 0x6E
-#define G_16 0x6F
-
-#define H_1 0x70
-#define H_2 0x71
-#define H_3 0x72
-#define H_4 0x73
-#define H_5 0x74
-#define H_6 0x75
-#define H_7 0x76
-#define H_8 0x77
-#define H_9 0x78
-#define H_10 0x79
-#define H_11 0x7A
-#define H_12 0x7B
-#define H_13 0x7C
-#define H_14 0x7D
-#define H_15 0x7E
-#define H_16 0x7F
-
-#define I_1 0x80
-#define I_2 0x81
-#define I_3 0x82
-#define I_4 0x83
-#define I_5 0x84
-#define I_6 0x85
-#define I_7 0x86
-#define I_8 0x87
-#define I_9 0x88
-#define I_10 0x89
-#define I_11 0x8A
-#define I_12 0x8B
-#define I_13 0x8C
-#define I_14 0x8D
-#define I_15 0x8E
-#define I_16 0x8F
-
-#define J_1 0x90
-#define J_2 0x91
-#define J_3 0x92
-#define J_4 0x93
-#define J_5 0x94
-#define J_6 0x95
-#define J_7 0x96
-#define J_8 0x97
-#define J_9 0x98
-#define J_10 0x99
-#define J_11 0x9A
-#define J_12 0x9B
-#define J_13 0x9C
-#define J_14 0x9D
-#define J_15 0x9E
-#define J_16 0x9F
-
-#define K_1 0xA0
-#define K_2 0xA1
-#define K_3 0xA2
-#define K_4 0xA3
-#define K_5 0xA4
-#define K_6 0xA5
-#define K_7 0xA6
-#define K_8 0xA7
-#define K_9 0xA8
-#define K_10 0xA9
-#define K_11 0xAA
-#define K_12 0xAB
-#define K_13 0xAC
-#define K_14 0xAD
-#define K_15 0xAE
-#define K_16 0xAF
-
-#define L_1 0xB0
-#define L_2 0xB1
-#define L_3 0xB2
-#define L_4 0xB3
-#define L_5 0xB4
-#define L_6 0xB5
-#define L_7 0xB6
-#define L_8 0xB7
-#define L_9 0xB8
-#define L_10 0xB9
-#define L_11 0xBA
-#define L_12 0xBB
-#define L_13 0xBC
-#define L_14 0xBD
-#define L_15 0xBE
-#define L_16 0xBF
diff --git a/keyboards/k_type/k_type.c b/keyboards/k_type/k_type.c
index 567ad28430..ae62f0e723 100644
--- a/keyboards/k_type/k_type.c
+++ b/keyboards/k_type/k_type.c
@@ -17,8 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "k_type.h"
 
-#include "is31fl3733.h"
-
 #ifdef RGB_MATRIX_ENABLE
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     { 0, B_1,  A_1,  C_1  },
@@ -47,11 +45,11 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     { 0, E_7,  D_7,  F_7  },
     { 0, E_8,  D_8,  F_8  },
     { 0, E_9,  D_9,  F_9  },
-    { 0, E_10, D_10, F_10 },
-    { 0, E_11, D_11, F_11 },
-    { 0, E_12, D_12, F_12 },
-    { 0, E_13, D_13, F_13 },
-    { 0, E_14, D_14, F_14 },
+    { 0, E_10, D_1,  F_10 },
+    { 0, E_11, D_1,  F_11 },
+    { 0, E_12, D_1,  F_12 },
+    { 0, E_13, D_1,  F_13 },
+    { 0, E_14, D_1,  F_14 },
     { 0, E_15, D_15, F_15 },
     { 0, E_16, D_16, F_16 },
 
@@ -64,11 +62,11 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     { 0, H_7,  G_7,  I_7  },
     { 0, H_8,  G_8,  I_8  },
     { 0, H_9,  G_9,  I_9  },
-    { 0, H_10, G_10,  I_10 },
-    { 0, H_11, G_11,  I_11 },
-    { 0, H_12, G_12,  I_12 },
-    { 0, H_13, G_13,  I_13 },
-    { 0, H_14, G_14,  I_14 },
+    { 0, H_10, G_1,  I_10 },
+    { 0, H_11, G_1,  I_11 },
+    { 0, H_12, G_1,  I_12 },
+    { 0, H_13, G_1,  I_13 },
+    { 0, H_14, G_1,  I_14 },
     { 0, H_15, G_15, I_15 },
     { 0, H_16, G_16, I_16 },
 
@@ -81,123 +79,106 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     { 0, K_7,  J_7,  L_7  },
     { 0, K_8,  J_8,  L_8  },
     { 0, K_9,  J_9,  L_9  },
-    { 0, K_10, J_10,  L_10 },
-    { 0, K_11, J_11,  L_11 },
-    { 0, K_12, J_12,  L_12 },
-    { 0, K_13, J_13,  L_13 },
-    { 0, K_14, J_14,  L_14 },
+    { 0, K_10, J_1,  L_10 },
+    { 0, K_11, J_1,  L_11 },
+    { 0, K_12, J_1,  L_12 },
+    { 0, K_13, J_1,  L_13 },
+    { 0, K_14, J_1,  L_14 },
     { 0, K_15, J_15, L_15 },
     { 0, K_16, J_16, L_16 },
 
     // Driver 2 is on I2C2 - currently not usable with i2c_master
-    { 1, B_1,  A_1,  C_1  },
-    { 1, B_2,  A_2,  C_2  },
-    { 1, B_3,  A_3,  C_3  },
-    { 1, B_4,  A_4,  C_4  },
-    { 1, B_5,  A_5,  C_5  },
-    { 1, B_6,  A_6,  C_6  },
-    { 1, B_7,  A_7,  C_7  },
-    { 1, B_8,  A_8,  C_8  },
-    { 1, B_9,  A_9,  C_9  },
-    { 1, B_10, A_10, C_10 },
-    { 1, B_11, A_11, C_11 },
-    { 1, B_12, A_12, C_12 },
-    { 1, B_13, A_13, C_13 },
-    { 1, B_14, A_14, C_14 },
-    { 1, B_15, A_15, C_15 },
-    { 1, B_16, A_16, C_16 },
-
-    { 1, E_1,  D_1,  F_1  },
-    { 1, E_2,  D_2,  F_2  },
-    { 1, E_3,  D_3,  F_3  },
-    { 1, E_4,  D_4,  F_4  },
-    { 1, E_5,  D_5,  F_5  },
-    { 1, E_6,  D_6,  F_6  },
-    { 1, E_7,  D_7,  F_7  },
-    { 1, E_8,  D_8,  F_8  },
-    { 1, E_9,  D_9,  F_9  },
-    { 1, E_10, D_10, F_10 },
-    { 1, E_11, D_11, F_11 },
-    { 1, E_12, D_12, F_12 },
-    { 1, E_13, D_13, F_13 },
-    { 1, E_14, D_14, F_14 },
-    { 1, E_15, D_15, F_15 },
-    { 1, E_16, D_16, F_16 },
-
-    { 1, H_1,  G_1,  I_1  },
-    { 1, H_2,  G_2,  I_2  },
-    { 1, H_3,  G_3,  I_3  },
-    { 1, H_4,  G_4,  I_4  },
-    { 1, H_5,  G_5,  I_5  },
-    { 1, H_6,  G_6,  I_6  },
-    { 1, H_7,  G_7,  I_7  },
-    { 1, H_8,  G_8,  I_8  },
-    { 1, H_9,  G_9,  I_9  },
-    { 1, H_10, G_10, I_10 },
-    { 1, H_11, G_11, I_11 },
-    { 1, H_12, G_12, I_12 },
-    { 1, H_13, G_13, I_13 },
-    { 1, H_14, G_14, I_14 },
-    { 1, H_15, G_15, I_15 },
-    { 1, H_16, G_16, I_16 },
-
-    { 1, K_1,  J_1,  L_1  },
-    { 1, K_2,  J_2,  L_2  },
-    { 1, K_3,  J_3,  L_3  },
-    { 1, K_4,  J_4,  L_4  },
-    { 1, K_5,  J_5,  L_5  },
-    { 1, K_6,  J_6,  L_6  },
-    { 1, K_7,  J_7,  L_7  }
+    //{ 1, B_1,  A_1,  C_1  },
+    //{ 1, B_2,  A_2,  C_2  },
+    //{ 1, B_3,  A_3,  C_3  },
+    //{ 1, B_4,  A_4,  C_4  },
+    //{ 1, B_5,  A_5,  C_5  },
+    //{ 1, B_6,  A_6,  C_6  },
+    //{ 1, B_7,  A_7,  C_7  },
+    //{ 1, B_8,  A_8,  C_8  },
+    //{ 1, B_9,  A_9,  C_9  },
+    //{ 1, B_10, A_10, C_10 },
+    //{ 1, B_11, A_11, C_11 },
+    //{ 1, B_12, A_12, C_12 },
+    //{ 1, B_13, A_13, C_13 },
+    //{ 1, B_14, A_14, C_14 },
+    //{ 1, B_15, A_15, C_15 },
+    //{ 1, B_16, A_16, C_16 },
+
+    //{ 1, E_1,  D_1,  F_1  },
+    //{ 1, E_2,  D_2,  F_2  },
+    //{ 1, E_3,  D_3,  F_3  },
+    //{ 1, E_4,  D_4,  F_4  },
+    //{ 1, E_5,  D_5,  F_5  },
+    //{ 1, E_6,  D_6,  F_6  },
+    //{ 1, E_7,  D_7,  F_7  },
+    //{ 1, E_8,  D_8,  F_8  },
+    //{ 1, E_9,  D_9,  F_9  },
+    //{ 1, E_10, D_1,  F_10 },
+    //{ 1, E_11, D_1,  F_11 },
+    //{ 1, E_12, D_1,  F_12 },
+    //{ 1, E_13, D_1,  F_13 },
+    //{ 1, E_14, D_1,  F_14 },
+    //{ 1, E_15, D_15, F_15 },
+    //{ 1, E_16, D_16, F_16 },
+
+    //{ 1, H_1,  G_1,  I_1  },
+    //{ 1, H_2,  G_2,  I_2  },
+    //{ 1, H_3,  G_3,  I_3  },
+    //{ 1, H_4,  G_4,  I_4  },
+    //{ 1, H_5,  G_5,  I_5  },
+    //{ 1, H_6,  G_6,  I_6  },
+    //{ 1, H_7,  G_7,  I_7  },
+    //{ 1, H_8,  G_8,  I_8  },
+    //{ 1, H_9,  G_9,  I_9  },
+    //{ 1, H_10, G_1,  I_10 },
+    //{ 1, H_11, G_1,  I_11 },
+    //{ 1, H_12, G_1,  I_12 },
+    //{ 1, H_13, G_1,  I_13 },
+    //{ 1, H_14, G_1,  I_14 },
+    //{ 1, H_15, G_15, I_15 },
+    //{ 1, H_16, G_16, I_16 },
+
+    //{ 1, K_1,  J_1,  L_1  },
+    //{ 1, K_2,  J_2,  L_2  },
+    //{ 1, K_3,  J_3,  L_3  },
+    //{ 1, K_4,  J_4,  L_4  },
+    //{ 1, K_5,  J_5,  L_5  },
+    //{ 1, K_6,  J_6,  L_6  },
+    //{ 1, K_7,  J_7,  L_7  }
 };
 
 led_config_t g_led_config = {
     {
         // Key Matrix to LED Index
-        {      0,      1,      2,      3,      4,      5,      6,      7,      8,      9 },
-        {     10,     11,     12,     13,     14,     15,     16,     17,     18,     19 },
-        {     20,     21,     22,     23,     24,     25,     26,     27,     28, NO_LED },
-        {     29, NO_LED,     30,     31,     32,     33,     34,     35,     36,     37 },
-        {     38,     39,     40,     41,     42,     43,     44,     45,     46, NO_LED },
-        {     47,     48,     49,     50,     51,     52,     53,     54,     55,     56 },
-        {     57,     58,     59,     60,     61, NO_LED,     62, NO_LED,     63, NO_LED },
-        {     64,     65,     66,     67,     68,     69,     70,     71,     72,     73 },
-        { NO_LED,     74, NO_LED,     75,     76,     77,     78,     79,     80,     81 },
-        {     82,     83,     84,     85,     86, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }
+        {   0,  10,     20,     29,     38,  47,     57, NO_LED, NO_LED, NO_LED },
+        {   1,  11,     21, NO_LED,     39,  48,     58, NO_LED, NO_LED, NO_LED },
+        {   2,  12,     22,     30,     40,  49,     59, NO_LED, NO_LED, NO_LED },
+        {   3,  13,     23,     31,     41,  50,     60, NO_LED, NO_LED, NO_LED },
+        {   4,  14,     24,     32,     42,  51,     61, NO_LED, NO_LED, NO_LED },
+        {   5,  15,     25,     33,     43,  52, NO_LED, NO_LED, NO_LED, NO_LED },
+        {   6,  16,     26,     34,     44,  53,     62, NO_LED, NO_LED, NO_LED },
+        {   7,  17,     27,     35,     45,  54, NO_LED, NO_LED, NO_LED, NO_LED },
+        {   8,  18,     28,     36,