summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authortmk <nobody@nowhere>2013-11-28 10:42:41 +0900
committertmk <nobody@nowhere>2013-11-28 11:31:48 +0900
commit532e100450615ef1e63e2eed548c38d0c4fa688b (patch)
treef09b8e4dc51fdca6a6ba0647b92cd672c7008ce9
parent9d26053f1c14da79336a64f800305660d1a71180 (diff)
Add ps2_usart.c and fix set_led at USB wake
-rw-r--r--protocol/lufa/lufa.c4
-rw-r--r--protocol/pjrc/usb.c3
-rw-r--r--protocol/ps2.h2
-rw-r--r--protocol/ps2_usart.c146
4 files changed, 29 insertions, 126 deletions
diff --git a/protocol/lufa/lufa.c b/protocol/lufa/lufa.c
index 04e8e78f38..eca51c8784 100644
--- a/protocol/lufa/lufa.c
+++ b/protocol/lufa/lufa.c
@@ -148,7 +148,6 @@ static void Console_Task(void)
*/
void EVENT_USB_Device_Connect(void)
{
- led_set(0x1f); // all on
}
void EVENT_USB_Device_Disconnect(void)
@@ -172,8 +171,9 @@ void EVENT_USB_Device_WakeUp()
#ifdef SLEEP_LED_ENABLE
sleep_led_disable();
-#endif
+ // NOTE: converters may not accept this
led_set(host_keyboard_leds());
+#endif
}
void EVENT_USB_Device_StartOfFrame(void)
diff --git a/protocol/pjrc/usb.c b/protocol/pjrc/usb.c
index 84c99972f2..393b36f78e 100644
--- a/protocol/pjrc/usb.c
+++ b/protocol/pjrc/usb.c
@@ -662,8 +662,9 @@ ISR(USB_GEN_vect)
suspend_wakeup_init();
#ifdef SLEEP_LED_ENABLE
sleep_led_disable();
-#endif
+ // NOTE: converters may not accept this
led_set(host_keyboard_leds());
+#endif
UDIEN |= (1<<SUSPE);
UDIEN &= ~(1<<WAKEUPE);
diff --git a/protocol/ps2.h b/protocol/ps2.h
index b780d01a29..483eea7209 100644
--- a/protocol/ps2.h
+++ b/protocol/ps2.h
@@ -70,11 +70,13 @@ POSSIBILITY OF SUCH DAMAGE.
#define PS2_RESEND 0xFE
#define PS2_SET_LED 0xED
+// TODO: error numbers
#define PS2_ERR_NONE 0
#define PS2_ERR_STARTBIT1 1
#define PS2_ERR_STARTBIT2 2
#define PS2_ERR_STARTBIT3 3
#define PS2_ERR_PARITY 0x10
+#define PS2_ERR_NODATA 0x20
#define PS2_LED_SCROLL_LOCK 0
#define PS2_LED_NUM_LOCK 1
diff --git a/protocol/ps2_usart.c b/protocol/ps2_usart.c
index 40c46c497c..d491142868 100644
--- a/protocol/ps2_usart.c
+++ b/protocol/ps2_usart.c
@@ -36,26 +36,9 @@ POSSIBILITY OF SUCH DAMAGE.
*/
/*
-Primitive PS/2 Library for AVR
-==============================
-Host side is only supported now.
-Synchronous USART is used to receive data by hardware process
-rather than interrupt. During V-USB interrupt runs, CLOCK interrupt
-cannot interpose. In the result it is prone to lost CLOCK edge.
+ * PS/2 protocol USART version
+ */
-
-I/O control
------------
-High state is asserted by internal pull-up.
-If you have a signaling problem, you may need to have
-external pull-up resisters on CLOCK and DATA line.
-
-
-PS/2 References
----------------
-http://www.computer-engineering.org/ps2protocol/
-http://www.mcamafia.de/pdf/ibm_hitrc07.pdf
-*/
#include <stdbool.h>
#include <avr/io.h>
#include <avr/interrupt.h>
@@ -75,18 +58,6 @@ http://www.mcamafia.de/pdf/ibm_hitrc07.pdf
uint8_t ps2_error = PS2_ERR_NONE;
-static inline void clock_lo(void);
-static inline void clock_hi(void);
-static inline bool clock_in(void);
-static inline void data_lo(void);
-static inline void data_hi(void);
-static inline bool data_in(void);
-static inline uint16_t wait_clock_lo(uint16_t us);
-static inline uint16_t wait_clock_hi(uint16_t us);
-static inline uint16_t wait_data_lo(uint16_t us);
-static inline uint16_t wait_data_hi(uint16_t us);
-static inline void idle(void);
-static inline void inhibit(void);
static inline uint8_t pbuf_dequeue(void);
static inline void pbuf_enqueue(uint8_t data);
static inline bool pbuf_has_data(void);
@@ -95,14 +66,15 @@ static inline void pbuf_clear(void);
void ps2_host_init(void)
{
- idle();
+ idle(); // without this many USART errors occur when cable is disconnected
PS2_USART_INIT();
PS2_USART_RX_INT_ON();
+ // POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20)
+ //_delay_ms(2500);
}
uint8_t ps2_host_send(uint8_t data)
{
- uint8_t res = 0;
bool parity = true;
ps2_error = PS2_ERR_NONE;
@@ -144,20 +116,22 @@ uint8_t ps2_host_send(uint8_t data)
WAIT(clock_hi, 50, 8);
WAIT(data_hi, 50, 9);
+ idle();
PS2_USART_INIT();
PS2_USART_RX_INT_ON();
- res = ps2_host_recv_response();
+ return ps2_host_recv_response();
ERROR:
idle();
PS2_USART_INIT();
PS2_USART_RX_INT_ON();
- return res;
+ return 0;
}
// Do polling data from keyboard to get response to last command.
uint8_t ps2_host_recv_response(void)
{
- while (!pbuf_has_data()) {
+ uint8_t retry = 25;
+ while (retry-- && !pbuf_has_data()) {
_delay_ms(1); // without this delay it seems to fall into deadlock
}
return pbuf_dequeue();
@@ -165,106 +139,32 @@ uint8_t ps2_host_recv_response(void)
uint8_t ps2_host_recv(void)
{
- return pbuf_dequeue();
+ if (pbuf_has_data()) {
+ ps2_error = PS2_ERR_NONE;
+ return pbuf_dequeue();
+ } else {
+ ps2_error = PS2_ERR_NODATA;
+ return 0;
+ }
}
ISR(PS2_USART_RX_VECT)
{
- uint8_t error = PS2_USART_ERROR;
+ // TODO: request RESEND when error occurs?
+ uint8_t error = PS2_USART_ERROR; // USART error should be read before data
uint8_t data = PS2_USART_RX_DATA;
if (!error) {
pbuf_enqueue(data);
+ } else {
+ xprintf("PS2 USART error: %02X data: %02X\n", error, data);
}
}
/* send LED state to keyboard */
void ps2_host_set_led(uint8_t led)
{
- // send 0xED then keyboard keeps waiting for next LED data
- // and keyboard does not send any scan codes during waiting.
- // If fail to send LED data keyboard looks like being freezed.
- uint8_t retry = 3;
- while (retry-- && ps2_host_send(PS2_SET_LED) != PS2_ACK)
- ;
- retry = 3;
- while (retry-- && ps2_host_send(led) != PS2_ACK)
- ;
-}
-
-
-/*--------------------------------------------------------------------
- * static functions
- *------------------------------------------------------------------*/
-static inline void clock_lo()
-{
- PS2_CLOCK_PORT &= ~(1<<PS2_CLOCK_BIT);
- PS2_CLOCK_DDR |= (1<<PS2_CLOCK_BIT);
-}
-static inline void clock_hi()
-{
- /* input with pull up */
- PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);
- PS2_CLOCK_PORT |= (1<<PS2_CLOCK_BIT);
-}
-static inline bool clock_in()
-{
- PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);
- PS2_CLOCK_PORT |= (1<<PS2_CLOCK_BIT);
- _delay_us(1);
- return PS2_CLOCK_PIN&(1<<PS2_CLOCK_BIT);
-}
-static inline void data_lo()
-{
- PS2_DATA_PORT &= ~(1<<PS2_DATA_BIT);
- PS2_DATA_DDR |= (1<<PS2_DATA_BIT);
-}
-static inline void data_hi()
-{
- /* input with pull up */
- PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);
- PS2_DATA_PORT |= (1<<PS2_DATA_BIT);
-}
-static inline bool data_in()
-{
- PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);
- PS2_DATA_PORT |= (1<<PS2_DATA_BIT);
- _delay_us(1);
- return PS2_DATA_PIN&(1<<PS2_DATA_BIT);
-}
-
-static inline uint16_t wait_clock_lo(uint16_t us)
-{
- while (clock_in() && us) { asm(""); _delay_us(1); us--; }
- return us;
-}
-static inline uint16_t wait_clock_hi(uint16_t us)
-{
- while (!clock_in() && us) { asm(""); _delay_us(1); us--; }
- return us;
-}
-static inline uint16_t wait_data_lo(uint16_t us)
-{
- while (data_in() && us) { asm(""); _delay_us(1); us--; }
- return us;
-}
-static inline uint16_t wait_data_hi(uint16_t us)
-{
- while (!data_in() && us) { asm(""); _delay_us(1); us--; }
- return us;
-}
-
-/* idle state that device can send */
-static inline void idle(void)
-{
- clock_hi();
- data_hi();
-}
-
-/* inhibit device to send */
-static inline void inhibit(void)
-{
- clock_lo();
- data_hi();
+ ps2_host_send(0xED);
+ ps2_host_send(led);
}