summaryrefslogtreecommitdiffstats
path: root/oncology/dpfhack_display/dpflib
diff options
context:
space:
mode:
Diffstat (limited to 'oncology/dpfhack_display/dpflib')
-rw-r--r--oncology/dpfhack_display/dpflib/Makefile24
-rw-r--r--oncology/dpfhack_display/dpflib/dpf.h143
-rw-r--r--oncology/dpfhack_display/dpflib/dpflib.c707
-rw-r--r--oncology/dpfhack_display/dpflib/fwload.c140
-rw-r--r--oncology/dpfhack_display/dpflib/rawusb.c177
-rw-r--r--oncology/dpfhack_display/dpflib/sglib.h19
6 files changed, 0 insertions, 1210 deletions
diff --git a/oncology/dpfhack_display/dpflib/Makefile b/oncology/dpfhack_display/dpflib/Makefile
deleted file mode 100644
index 79010b6d..00000000
--- a/oncology/dpfhack_display/dpflib/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-OBJS = dpflib.o rawusb.o
-
-CFLAGS = -Wall -fPIC -I../include -g
-
-ifndef DESTDIR
- DESTDIR = ..
-endif
-
-all: libdpf.a fwload
-
-fwload: fwload.o libdpf.a
- $(CC) -o $@ fwload.o -L. -ldpf -lusb
-
-testusb: testusb.o libdpf.a
- $(CC) -o $@ testusb.o -L. -ldpf -lusb
-
-libdpf.a: $(OBJS)
- ar ruv $@ $(OBJS)
-
-clean:
- rm -f fwload libdpf.a *.o
-
-install: all
- cp fwload libdpf.a $(DESTDIR)
diff --git a/oncology/dpfhack_display/dpflib/dpf.h b/oncology/dpfhack_display/dpflib/dpf.h
deleted file mode 100644
index ba6c05d8..00000000
--- a/oncology/dpfhack_display/dpflib/dpf.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/** libdpf header file
- *
- * (c) 2010, 2011 <hackfin@section5.ch>
- *
- */
-
-#include <usb.h>
-#include "usbuser.h"
-
-#define ADDR unsigned int
-
-#define MODE_SG 0x00 ///< generic device mode (original)
-#define MODE_USB 0x01 ///< libusb operation mode (hacked)
-#define FLAG_CAN_LOCK 0x80 ///< Has the locking feature (new firmware)
-
-enum {
- DEVERR_FILE = -16,
- DEVERR_OPEN,
- DEVERR_HEX,
- DEVERR_CHK,
- DEVERR_IO,
- DEVERR_MALLOC,
- DEVERR_TIMEOUT,
-};
-
-/** The DPF context structure */
-
-typedef
-struct dpf_context {
- unsigned char mode;
- unsigned char flags;
- union {
- usb_dev_handle *udev;
- int fd;
- } dev;
- unsigned int width;
- unsigned int height;
- int bpp;
- int proto;
- char* buff;
- unsigned char* oldpix;
- int offx;
- int offy;
-} DPFContext;
-
-/** A value proxy for the property API */
-typedef struct dpf_proxy {
- union {
- short integer;
- char *sequence;
- } value;
- char type;
-} DPFValue;
-
-enum {
- TYPE_INTEGER,
- TYPE_STRING,
-};
-
-#define DPFHANDLE struct dpf_context *
-
-/**
- Opens the DPF device. if dev is not NULL, open device, otherwise, look for
- USB device.
- */
-int dpf_open(const char *dev, DPFHANDLE *h);
-
-/** Close DPF device */
-void dpf_close(DPFHANDLE h);
-
-/*
- */
-void dpf_writefb(DPFHANDLE h, unsigned char *fb);
-
-int dpf_screen_blit(DPFHANDLE h, const unsigned char *buf, short rect[4]);
-
-/** Set property on DPF
- * \param token Property token
- * \param value Pointer to value
- */
-int dpf_setproperty(DPFHANDLE h, int token, const DPFValue *value);
-
-/* USB raw */
-
-int emulate_scsi(usb_dev_handle *d, unsigned char *cmd, int cmdlen, char out,
- unsigned char *data, unsigned long block_len);
-
-const char *dev_errstr(int err);
-
-// Private stuff:
-usb_dev_handle *dpf_usb_open(int index);
-int sgdev_open(const char *portname, int *fd);
-
-////////////////////////////////////////////////////////////////////////////
-// FLASH stuff
-
-// Maximum size for flash_read
-#define MAX_CHUNKSIZE 0x10000
-
-int read_mem(DPFHANDLE h, unsigned char *buf, ADDR offset, int len);
-int write_mem(DPFHANDLE h, const char *hexfile);
-int code_go(DPFHANDLE h, ADDR start);
-
-int dpf_bootstrap(DPFHANDLE h,
- ADDR dst, unsigned char *src, unsigned short n, ADDR start);
-
-int flash_cmd(DPFHANDLE h, int command, int cmdlen, ADDR addr);
-int flash_probe(DPFContext *h, unsigned char *id);
-int flash_erase(DPFHANDLE h, ADDR offset);
-int flash_write(DPFHANDLE h, const unsigned char *buf, ADDR offset, int len);
-int flash_read(DPFHANDLE h, unsigned char *buf, ADDR offset, int len);
-
-int load_ihx(const char *fname, unsigned char *data,
- unsigned int *buflen, unsigned int reloc);
-
-int patch_sector(DPFHANDLE h,
- ADDR reloc, unsigned long addr, const char *hexfile);
-
-////////////////////////////////////////////////////////////////////////////
-/* DPF specific stuff: */
-
-#define RGB565_0(r, g, b) \
- (( ((r) & 0xf8) ) | (((g) & 0xe0) >> 5))
-#define RGB565_1(r, g, b) \
- (( ((g) & 0x1c) << 3 ) | (((b) & 0xf8) >> 3))
-
-#define RGB565(r, g, b) { RGB565_0(r, g, b), RGB565_1(r, g, b) }
-
-int dpf_copy(ADDR dst, unsigned char *src, unsigned short n);
-
-// int clr_screen(DPFHANDLE h, const unsigned char *col);
-int write_screen(DPFHANDLE h, const unsigned char *buf, unsigned int len);
-
-
-// Some internal address offsets. They may change, but so far all types
-// seem to have the same
-//
-// w: word, <n>: length, [LE, BE]
-//
-// FIXME: Use packed struct later.
-
-// FIXME: Should be 0x0020, once we have the firmware replaced
-#define OFFSET_PROPS 0x3f0020 ///< w[2]:LE : Resolution X, Y
diff --git a/oncology/dpfhack_display/dpflib/dpflib.c b/oncology/dpfhack_display/dpflib/dpflib.c
deleted file mode 100644
index e248eb09..00000000
--- a/oncology/dpfhack_display/dpflib/dpflib.c
+++ /dev/null
@@ -1,707 +0,0 @@
-/** DPF access library for AX206 based HW
- *
- * 12/2010 <hackfin@section5.ch>
- *
- * This is an ugly hack, because we use existing SCSI vendor specific
- * extensions to pass on our requests to the DPF.
- *
- * One day we might use a proper protocol like netpp.
- *
- */
-
-// FIXME: Put all those SCSI commands in one (wrapped) place.
-
-#include "dpf.h"
-#include "sglib.h"
-
-#include "flash.h"
-#include <fcntl.h>
-#include "usbuser.h" // our user defined flash commands
-#include <unistd.h>
-#include <stdio.h>
-#include <errno.h>
-#include <string.h>
-#include <scsi/scsi.h>
-#include <scsi/sg.h>
-#include <sys/ioctl.h>
-
-#ifdef DEBUG
-#define DEB(x) x
-#else
-#define DEB(x)
-#endif
-
-/** Vendor command for our hacks */
-static
-unsigned char g_excmd[16] = {
- 0xcd, 0, 0, 0,
- 0, 6, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0
-};
-
-int do_scsi(int fd, unsigned char *cmd, int cmdlen, char out,
- unsigned char *data, unsigned long block_len)
-{
- int error;
- unsigned char sensebuf[32];
- sg_io_hdr_t io_hdr;
- memset(&io_hdr, 0, sizeof(sg_io_hdr_t));
-
- io_hdr.interface_id = 'S';
- io_hdr.sbp = sensebuf;
- io_hdr.mx_sb_len = sizeof(sensebuf);
- if (data == 0) {
- io_hdr.dxfer_direction = SG_DXFER_NONE;
- } else {
- if (out) {
- io_hdr.dxfer_direction = SG_DXFER_TO_DEV;
- } else {
- io_hdr.dxfer_direction = SG_DXFER_FROM_DEV;
- }
- }
- io_hdr.dxferp = data;
- io_hdr.dxfer_len = block_len;
- io_hdr.cmdp = cmd;
- io_hdr.cmd_len = cmdlen;
- io_hdr.timeout = 5000; // in ms
- error = ioctl(fd, SG_IO, &io_hdr);
- if (error < 0) perror("calling SCSI ioctl()");
- return error;
-}
-
-int wrap_scsi(DPFContext *h, unsigned char *cmd, int cmdlen, char out,
- unsigned char *data, unsigned long block_len)
-{
- int error;
- if (h->mode == MODE_USB) {
- error = emulate_scsi(h->dev.udev, cmd, cmdlen, out, data, block_len);
- } else {
- error = do_scsi(h->dev.fd, cmd, cmdlen, out, data, block_len);
- }
- return error;
-}
-
-/* device wrapper */
-
-const char idstring[] = "buildwin Photo Frame 1.01";
-
-#define INQ_REPLY_LEN 96
-
-int sgdev_open(const char *portname, int *fd)
-{
- int error;
-
- static
- unsigned char inquiry[] = {
- INQUIRY, 0, 0, 0,
- INQ_REPLY_LEN, 0
- };
-
- static unsigned char inqbuf[INQ_REPLY_LEN + 2];
-
- *fd = open(portname, O_RDONLY | O_NONBLOCK );
- error = do_scsi(*fd, inquiry, sizeof(inquiry), DIR_IN, inqbuf,
- INQ_REPLY_LEN);
-
- if (error < 0) {
- fprintf(stderr, "SCSI inquiry failed\n");
- close(*fd); error = DEVERR_OPEN;
- } else
- if (memcmp(idstring, &inqbuf[8], sizeof(idstring) - 1) != 0) {
- close(*fd); error = DEVERR_OPEN;
- fprintf(stderr, "Not a photo frame. Refuse to open device.\n");
- }
- return error;
-}
-
-static
-int probe(DPFHANDLE h)
-{
- int ret;
-
- // We abuse a command that just responds with a '0' status in the
- // original firmware.
- static unsigned char buf[5];
-
-
- static
- unsigned char cmd[16] = {
- 0xcd, 0, 0, 0,
- 0, 3, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0
- };
-
- cmd[5] = 3;
- ret = wrap_scsi(h, cmd, sizeof(cmd), DIR_IN, 0, 0);
-
- switch (ret) {
- case 0:
- // The original protocol.
- fprintf(stderr,
- "Warning: This firmware can not lock the flash\n");
- break;
- case 1:
- // The improved hack
- h->flags |= FLAG_CAN_LOCK;
- break;
- }
-
- cmd[5] = 2; // get LCD parameters
- ret = wrap_scsi(h, cmd, sizeof(cmd), DIR_IN, buf, 5);
- h->width = (buf[0]) | (buf[1] << 8);
- h->height = (buf[2]) | (buf[3] << 8);
- h->bpp = 2;
-
- return ret;
-}
-
-/*
-static
-int dpf_query(DPFHANDLE h)
-{
- int ret;
- unsigned char buf[64]; // Do not change size
-
- static
- unsigned char cmd[16] = {
- 0xcd, 0, 0, 0,
- 0, 3, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0
- };
-
- return wrap_scsi(h, cmd, sizeof(cmd), DIR_IN, buf, sizeof(buf));
-}
-*/
-
-
-
-int dpf_open(const char *dev, DPFHANDLE *h)
-{
- int error = 0;
- DPFContext *dpf;
- int i;
- usb_dev_handle *u;
-
- int fd;
-
- if (!dev) {
- fprintf(stderr, "Please specify a string like 'usb0' or a sg device\n");
- return DEVERR_OPEN;
- }
-
- if (strncmp(dev, "usb", 3) == 0) {
- i = dev[3] - '0';
- u = dpf_usb_open(i);
- if (!u) return DEVERR_OPEN;
- i = MODE_USB;
- } else {
- fprintf(stderr, "Opening generic SCSI device '%s'\n", dev);
- if (sgdev_open(dev, &fd) < 0) return DEVERR_OPEN;
- i = MODE_SG;
- }
-
- dpf = (DPFHANDLE) malloc(sizeof(DPFContext));
- if (!dpf) return DEVERR_MALLOC;
-
- dpf->flags = 0;
- dpf->mode = i;
-
- if (dpf->mode == MODE_USB) {
- dpf->dev.udev = u;
- error = probe(dpf);
- fprintf(stderr, "Got LCD dimensions: %dx%d\n", dpf->width, dpf->height);
- } else {
- dpf->dev.fd = fd;
- }
-
- *h = dpf;
- return error;
-}
-
-void dpf_close(DPFContext *h)
-{
- switch (h->mode) {
- case MODE_SG:
- close(h->dev.fd);
- break;
- case MODE_USB:
- usb_release_interface(h->dev.udev, 0);
- usb_close(h->dev.udev);
- break;
- }
- free(h);
-}
-
-const char *dev_errstr(int err)
-{
- switch (err) {
- case DEVERR_FILE: return "File I/O error";
- case DEVERR_OPEN: return "File open error";
- case DEVERR_HEX: return "Hex file error";
- case DEVERR_CHK: return "Checksum error";
- case DEVERR_IO: return "Common I/O error";
- default: return "Unknown error";
- }
-}
-
-/* Flash stuff */
-
-int flash_cmd(DPFContext *h, int command, int cmdlen, ADDR addr)
-{
- static
- unsigned char cmd[16] = {
- 0xcb, 0, 0, 0, 0, 0,
- 1, 0, 0, 0,
- 0, 0, 0, 0,
- 0, 0
- };
-
- cmd[10] = command;
- cmd[6] = cmdlen;
-
- // Sector number or addr:
- cmd[13] = addr;
- cmd[12] = addr >> 8;
- cmd[11] = addr >> 16;
-
- return wrap_scsi(h, cmd, sizeof(cmd), DIR_IN, 0, 0);
-}
-
-
-int flash_read(DPFContext *h, unsigned char *buf, ADDR offset, int len)
-{
- static
- unsigned char cmd[16] = {
- 0xcd, 0, 0, 0, 0, 0,
- 0x04, /* num of bytes: */ 0, 0, 0,
- SPM_READ, /* SPI offset: */ 0, 0, 0,
- 0, 0
- };
-
- cmd[9] = len >> 0;
- cmd[8] = len >> 8;
- cmd[7] = len >> 16;
-
- cmd[13] = offset >> 0;
- cmd[12] = offset >> 8;
- cmd[11] = offset >> 16;
-
- return wrap_scsi(h, cmd, sizeof(cmd), DIR_IN, buf, len);
-}
-
-static
-int flash_writechunk(DPFContext *h, const unsigned char *buf, ADDR offset, int len)
-{
- static
- unsigned char cmd[16] = {
- 0xcb, 0, 0, 0, 0, 0,
- 4, /* num of bytes: */ 0, 0, 0,
- SPM_PP, /* SPI offset: */ 0, 0, 0,
- 0, 0
- };
-
- cmd[9] = len >> 0;
- cmd[8] = len >> 8;
- cmd[7] = len >> 16;
-
- cmd[13] = offset >> 0;
- cmd[12] = offset >> 8;
- cmd[11] = offset >> 16;
-
- return wrap_scsi(h, cmd, sizeof(cmd), DIR_OUT,
- (unsigned char*) buf, len);
-}
-
-int flash_write(DPFContext *h, const unsigned char *buf, ADDR offset, int len)
-{
- int i;
- int error = 0;
-
- for (i = 0; i < len; i += 0x1000) {
- error = flash_cmd(h, SPM_WREN, 1, 0);
- DEB(printf("Write pages at %06x\n", offset));
- error = flash_writechunk(h, buf, offset, 0x1000);
- if (error < 0) break;
- buf += 0x1000; offset += 0x1000;
- }
- return error;
-}
-
-
-int load_ihx(const char *fname, unsigned char *data,
- unsigned int *buflen, unsigned int reloc)
-{
- unsigned char csum_is, csum_need;
- int ret;
- FILE *f;
-
- static char line[512];
- static unsigned char buf[0x100];
- int count;
- unsigned int addr, len, type;
- unsigned short b;
- unsigned int total = 0;
-
- DEB(printf("Opening %s...\n", fname));
- f = fopen(fname, "r");
- if (f == NULL) {
- return DEVERR_OPEN;
- }
-
- while(1) {
- fgets(line, sizeof(line), f);
-
- if (feof(f) || ferror(f)) break;
-
- if ((line[0] != ':') || (strlen(line) < 9)) {
- fprintf(stderr, "invalid line in ihx\n");
- break;
- }
-
- ret = sscanf(&line[1], "%02x", &len);
- if (ret != 1) { ret = DEVERR_HEX; break; }
-
- ret = sscanf(&line[3], "%04x", &addr);
- if (ret != 1) { ret = DEVERR_HEX; break; }
-
- ret = sscanf(&line[7], "%02x", &type);
- if (ret != 1) { ret = DEVERR_HEX; break; }
-
-#ifdef DEBUG
- printf("len %u addr %04x type %u\n", len, addr, type);
-#endif
-
- if (type == 1) break;
-
- if (type != 0) {
- fprintf(stderr, "ihx: unknown type %u\n", type);
- continue;
- }
-
- csum_need = len + (addr & 0xff) + (addr >> 8) + type;
-
- total += len;
- if (total > *buflen) {
- fprintf(stderr, "Buffer length exceeded. IHX file too big.\n");
- ret = DEVERR_HEX;
- break;
- }
-
- if (len > sizeof(buf)) {
- fprintf(stderr, "Buffer length exceeded. Too long lines.\n");
- ret = DEVERR_HEX;
- break;
- }
-
- for(count = 0; count < len; count++) {
- ret = sscanf(&line[9 + count * 2], "%02hx", &b);
- if (ret != 1) {
- fprintf(stderr, "hex file: could not parse data!\n");
- break;
- }
-
- buf[count] = b;
- csum_need += buf[count];
- }
-
- if (ret != 1) { ret = DEVERR_HEX; break; }
-
- ret = sscanf(&line[9 + len * 2], "%02hx", &b);
- if (ret != 1) { ret = DEVERR_HEX; break; }
-
- csum_is = b;
- if (((csum_need+csum_is) & 0xff) != 0x00) {
- fprintf(stderr, "ihx: checksum failure! is: %02x should be:%02x\n",
- csum_is, csum_need);
- ret = DEVERR_CHK;
- break;
- }
-
- if (addr < reloc) {
- fprintf(stderr, "Bad relocation value\n");
- ret = DEVERR_HEX;
- break;
- }
- // Copy to data buffer at relocated address
- if (data) {
- DEB(printf("Patching at offset %08x, chunk size %d\n",
- addr - reloc, len));
- memcpy(&data[addr - reloc], buf, len);
- } else {
- DEB(printf("Writing to %04x (CODE: %04x), chunk size %d\n",
- addr - reloc, addr, len));
- dpf_copy(addr - reloc, buf, len);
- }
- }
- *buflen = total;
- fclose(f);
- return ret;
-}
-
-
-int flash_probe(DPFContext *h, unsigned char *id)
-{
- int error;
- static
- unsigned char buf[64];
- static
- unsigned char cmd[16] = {
- 0xcd, 0, 0, 0, 0, 0,
- 1, sizeof(buf) >> 16, sizeof(buf) >> 8, sizeof(buf) >> 0,
- // flash command sequence:
- SPM_RDID, 0, 0, 0,
- 0, 0
- };
-
- error = wrap_scsi(h, cmd, sizeof(cmd), DIR_IN, buf, sizeof(buf));
- id[0] = buf[0]; id[1] = buf[1]; id[2] = buf[2];
- return error;
-}
-
-int flash_erase(DPFContext *h, ADDR addr)
-{
- int error;
- error = flash_cmd(h, SPM_RES, 1, 0);
- error = flash_cmd(h, SPM_WREN, 1, 0);
- error = flash_cmd(h, SPM_WRSR, 2, 0); // clr status
-
- // now erase flash sector:
- error = flash_cmd(h, SPM_WREN, 1, 0);
- error = flash_cmd(h, SPM_FLASH_SE, 4, addr);
- return error;
-}
-
-void dpf_flash_lock(DPFContext *h, char enable)
-{
- unsigned char *cmd = g_excmd;
-
- if (!(h->flags & FLAG_CAN_LOCK)) return;
-
- printf("Lock flash %d\n", enable);
- cmd[6] = USBCMD_FLASHLOCK; // flash lock
- cmd[7] = enable;
-
- wrap_scsi(h, cmd, sizeof(g_excmd), DIR_IN, 0, 0);
-}
-
-
-int patch_sector(DPFContext *h,
- ADDR reloc, unsigned long addr, const char *hexfile)
-{
- int error;
- unsigned short offset;
- static
- unsigned char readbuf[0x10000];
- unsigned int len = sizeof(readbuf);
-
- offset = addr & 0xffff;
- addr -= offset;
-
- error = flash_read(h, readbuf, addr, 0x10000);
- if (error < 0) {
- perror("Reading flash");
- return error;
- }
-
- error = load_ihx(hexfile, &readbuf[offset], &len, reloc);
- if (error < 0) {
- fprintf(stderr, "Failed to load HEX file\n");
- return error;
- }
- // Lock DPF handler so nothing can interfere with the flashing (in case
- // we flash ourselves)
- dpf_flash_lock(h, 1);
- error = flash_cmd(h, SPM_WREN, 1, 0);
- error = flash_cmd(h, SPM_WRSR, 2, 0); // clr status
-
- error = flash_erase(h, addr);
- if (error < 0) return error;
-
- error = flash_write(h, readbuf, addr, 0x10000); // clr status
- dpf_flash_lock(h, 0);
-
- return error;
-}
-
-////////////////////////////////////////////////////////////////////////////
-// High level functions, generic
-// These require a hacked command handler with extended command set.
-
-
-static DPFHANDLE g_dpf;
-
-int write_mem(DPFContext *h, const char *hexfile)
-{
- unsigned int len = 0xc000;
- int error;
-
- g_dpf = h;
- error = load_ihx(hexfile, 0, &len, 0x800);
- return error;
-}
-
-int read_blk(DPFContext *h, unsigned char *buf, ADDR offset, int len)
-{
- unsigned char *cmd = g_excmd;
-
- cmd[6] = USBCMD_MEMREAD; // memory_read
- cmd[7] = offset;
- cmd[8] = offset >> 8;
- cmd[9] = len;
- cmd[10] = len >> 8;
-
- return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_IN, buf, len);
-}
-
-#define CHUNK_SIZE 1024
-
-int read_mem(DPFContext *h, unsigned char *buf, ADDR offset, int len)
-{
- int error = 0;
- while (len > CHUNK_SIZE && error >= 0) {
- error = read_blk(h, buf, offset, CHUNK_SIZE);
- offset += CHUNK_SIZE; len -= CHUNK_SIZE; buf += CHUNK_SIZE;
- }
- error = read_blk(h, buf, offset, len);
-
- return error;
-}
-
-
-int code_go(DPFContext *h, ADDR start)
-{
- unsigned char *cmd = g_excmd;
- printf("Executing applet..\n");
- cmd[6] = 0x02; // execute
- cmd[7] = start;
- cmd[8] = start >> 8;
-
- return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_IN, 0, 0);
-}
-
-
-
-////////////////////////////////////////////////////////////////////////////
-// High level functions, DPF specific
-
-/* Bootstrap mode: Expects contiguous memory block to download, then jumps
- * into start address
- */
-int dpf_bootstrap(DPFContext *h,
- ADDR dest, unsigned char *src, unsigned short n, ADDR start)
-{
- unsigned char *cmd = g_excmd;
- cmd[6] = USBCMD_APPLOAD; // Enter bootstrap mode
- cmd[7] = dest;
- cmd[8] = dest >> 8;
- cmd[9] = n;
- cmd[10] = n >> 8;
- cmd[11] = start;
- cmd[12] = start >> 8;
-
- return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_OUT, src, n);
-}
-
-int dpf_copy(ADDR dst, unsigned char *src, unsigned short n)
-{
- unsigned char *cmd = g_excmd;
-
- cmd[6] = 0x01; // memory_write
- cmd[7] = dst;
- cmd[8] = dst >> 8;
- cmd[9] = n;
- cmd[10] = n >> 8;
-
- return wrap_scsi(g_dpf, cmd, sizeof(g_excmd), DIR_OUT, src, n);
-}
-
-/* Currently unused.
-int clr_screen(DPFContext *h, const unsigned char *col)
-{
- unsigned char *cmd = g_excmd;
-
- cmd[6] = USBCMD_PROBE;
- cmd[7] = col[0];
- cmd[8] = col[1];
-
- return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_IN, 0, 0);
-}
-*/
-
-/* This function is deprecated and may not be implemented on newer hacks
- */
-int write_screen(DPFContext *h, const unsigned char *buf, unsigned int len)
-{
- unsigned char *cmd = g_excmd;
- unsigned int l;
- unsigned char factor;
-
- if (len > 0xffff) {
- factor = 2; l = len >> 1;
- } else {
- factor = 1; l = len;
- }
-
- cmd[6] = USBCMD_WRITEFB;
- cmd[7] = factor;
- cmd[8] = 0;
- cmd[9] = l;
- cmd[10] = l >> 8;
-
- return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_OUT,
- (unsigned char*) buf, len);
-}
-
-int dpf_screen_blit(DPFContext *h,
- const unsigned char *buf, short rect[4])
-{
- unsigned long len = (rect[2] - rect[0]) * (rect[3] - rect[1]);
- len <<= 1;
- unsigned char *cmd = g_excmd;
-
- cmd[6] = USBCMD_BLIT;
- cmd[7] = rect[0];
- cmd[8] = rect[0] >> 8;
- cmd[9] = rect[1];
- cmd[10] = rect[1] >> 8;
- cmd[11] = rect[2] - 1;
- cmd[12] = (rect[2] - 1) >> 8;
- cmd[13] = rect[3] - 1;
- cmd[14] = (rect[3] - 1) >> 8;
- cmd[15] = 0;
-
- return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_OUT,
- (unsigned char*) buf, len);
-}
-
-void dpf_writefb(DPFContext *h, unsigned char *buffer)
-{
- int len;
-
- len = h->width * h->height * h->bpp;
- write_screen(h, buffer, len);
-}
-
-int dpf_setproperty(DPFContext *h, int token, const DPFValue *value)
-{
- unsigned char *cmd = g_excmd;
-
- cmd[6] = USBCMD_SETPROPERTY;
- cmd[7] = token;
- cmd[8] = token >> 8;
-
- switch (value->type) {
- case TYPE_INTEGER:
- cmd[9] = value->value.integer;
- cmd[10] = value->value.integer >> 8;
- break;
- default:
- break;
- }
-
- return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_OUT, NULL, 0);
-}
-
diff --git a/oncology/dpfhack_display/dpflib/fwload.c b/oncology/dpfhack_display/dpflib/fwload.c
deleted file mode 100644
index 72e37f4a..00000000
--- a/oncology/dpfhack_display/dpflib/fwload.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/** DPF firmware loader
- *
- * 12/2010 <hackfin@section5.ch>
- *
- * Based on the FX2 ihx loader
- *
- */
-
-#include "dpf.h"
-#include <stdio.h>
-
-////////////////////////////////////////////////////////////////////////////
-
-// Demo stuff:
-
-void memory_dump(unsigned char *buf, unsigned int n)
-{
- int i = 0;
- int c = 0;
-
- while (i < n) {
- printf("%02x ", buf[i]);
- c++;
- if (c == 16) { c = 0; printf("\n"); }
- i++;
- }
- if (c)
- printf("\n");
-}
-
-int demo0(DPFHANDLE h)
-{
- static unsigned char image[2 * 128 * 128];
- int x, y;
- int i;
- for (i = 0; i < 127; i++) {
- unsigned char *b = image;
- for (y = 0; y < 128; y++) {
- for (x = 0; x < 128; x++) {
- *b++ = RGB565_0(x * 2 + i, y * 2 + i, i);
- *b++ = RGB565_1(x * 2 + i, y * 2 + i, i);
- }
- }
- write_screen(h, image, sizeof(image));
- }
- return 0;
-}
-
-
-////////////////////////////////////////////////////////////////////////////
-
-
-#if EXPERIMENTAL
-
-int xmain(int argc, char **argv)
-{
- int ret;
- int i;
- struct banktable *bt;
-
- // flash offset, offset after jump table
- unsigned int offset = 0x80000 + 0x200;
-
-
- static unsigned char buf[0x10000];
- unsigned int len = sizeof(buf);
- ret = load_ihx(argv[1], buf, &len, 0x127c, g_banktab);
- if (ret < 0) {
- fprintf(stderr, "Failed to load HEX file\n");
- return ret;
- } else {
- printf("Read %d banks\n", ret);
- for (i = 0; i < ret; i++) {
- bt = &g_banktab[i];
- printf(" { XADDR(0x%04x), XADDR(0x%04x), FOFFS(0x%06x) },\n",
- bt->reloc, bt->reloc + bt->len, offset + bt->offset);
-
- }
- }
- return 0;
-}
-
-#endif
-
-int main(int argc, char **argv)
-{
- int ret;
- DPFHANDLE h;
-
- int i = 2;
-
- if (argc < 2 || argc > 3) {
- fprintf(stderr, "Usage:\n"
- "%s <generic scsi dev> <.ihx file>\n"
- "or in USB mode:\n"
- "%s <.ihx file>\n",
- argv[0], argv[0]);
- return -1;
- }
-
- if (argc == 2) {
- ret = dpf_open(NULL, &h);
- i--;
- } else
- if (argc == 3) {
- ret = dpf_open(argv[1], &h);
- }
-
- if (ret < 0) {
- perror("opening DPF device:");
- return ret;
- }
-
-// This patches a module to init the relocated jump table on a certain
-// menu action:
-// ret = patch_sector(h, 0x1330, 0x4af7a, "hack2.ihx");
-
-
-// patch_sector(h, 0x0, 0x100000, "jumptbl.ihx");
-
- if (0) {
- patch_sector(h, 0x0, 0x100000, "jumptbl.ihx");
- ret = patch_sector(h, 0x1330, 0x110000, "hack.ihx");
- ret = patch_sector(h, 0x132a, 0x120000, "main.ihx");
- if (ret < 0) printf("Failed.\n");
- } else {
- // demo0(h);
-
- }
- ret = write_mem(h, argv[i]);
- code_go(h, 0x18a0);
- if (ret < 0) printf("Failed.\n");
-
- // unsigned char buf[256];
- // ret = read_mem(h, buf, 0x18a0, 64);
- // memory_dump(buf, 64);
-
- dpf_close(h);
- return ret;
-}
diff --git a/oncology/dpfhack_display/dpflib/rawusb.c b/oncology/dpfhack_display/dpflib/rawusb.c
deleted file mode 100644
index a3c568b7..00000000
--- a/oncology/dpfhack_display/dpflib/rawusb.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/* Low level USB code to access DPF.
- *
- * (c) 2010, 2011 <hackfin@section5.ch>
- *
- * This currently uses the SCSI command set
- *
- * The reason for this is that we want to access the hacked frame
- * non-root and without having to wait for the SCSI interface to
- * intialize.
- *
- * Later, we'll replace the SCSI command stuff.
- */
-
-#include "dpf.h"
-#include "sglib.h"
-
-#include <string.h>
-#include <stdio.h>
-
-#define ENDPT_OUT 1
-#define ENDPT_IN 0x81
-
-struct known_device {
- char *desc;
- unsigned short vid;
- unsigned short pid;
-} g_known_devices[] = {
- { "AX206 DPF", 0x1908, 0x0102 },
- { 0 , 0, 0 } /* NEVER REMOVE THIS */
-};
-
-int handle_error(char *txt)
-{
- fprintf(stderr, "Error: %s\n", txt);
- return -1;
-}
-
-void usb_flush(usb_dev_handle *dev)
-{
- char buf[20];
- usb_bulk_read(dev, ENDPT_IN, buf, 3, 1000);
-}
-
-int check_known_device(struct usb_device *d)
-{
- struct known_device *dev = g_known_devices;
-
- while (dev->desc) {
- if ((d->descriptor.idVendor == dev->vid) &&
- (d->descriptor.idProduct == dev->pid)) {
- fprintf(stderr, "Found %s\n", dev->desc);
- return 1;
- }
- dev++;
- }
- return 0;
-}
-
-static struct usb_device *find_dev(int index)
-{
- struct usb_bus *b;
- struct usb_device *d;
- int enumeration = 0;
-
- b = usb_get_busses();
-
- while (b) {
- d = b->devices;
- while (d) {
- if (check_known_device(d)) {
- if (enumeration == index) return d;
- else enumeration++;
- }
-
-#ifdef DEBUG
- printf("%04x %04x\n",
- d->descriptor.idVendor,
- d->descriptor.idProduct);
-#endif
- d = d->next;
- }
- b = b->next;
- }
- return NULL;
-}
-
-char g_buf[] = {
- 0x55, 0x53, 0x42, 0x43, // dCBWSignature
- 0xde, 0xad, 0xbe, 0xef, // dCBWTag
- 0x00, 0x80, 0x00, 0x00, // dCBWLength
- 0x00, // bmCBWFlags: 0x80: data in (dev to host), 0x00: Data out
- 0x00, // bCBWLUN
- 0x10, // bCBWCBLength
-
- // SCSI cmd:
- 0xcd, 0x00, 0x00, 0x00,
- 0x00, 0x06, 0x11, 0xf8,
- 0x70, 0x00, 0x40, 0x00,
- 0x00, 0x00, 0x00, 0x00,
-};
-
-int emulate_scsi(usb_dev_handle *dev, unsigned char *cmd, int cmdlen, char out,
- unsigned char *data, unsigned long block_len)
-{
- int len;
- int ret;
- static unsigned char ansbuf[13]; // Do not change size.
-
- g_buf[14] = cmdlen;
- memcpy(&g_buf[15], cmd, cmdlen);
-
- g_buf[8] = block_len;
- g_buf[9] = block_len >> 8;
- g_buf[10] = block_len >> 16;
- g_buf[11] = block_len >> 24;
-
- ret = usb_bulk_write(dev, ENDPT_OUT, g_buf, sizeof(g_buf), 1000);
- if (ret < 0) return ret;
-
- if (out == DIR_OUT) {
- if (data) {
- ret = usb_bulk_write(dev, ENDPT_OUT, (const char* )data,
- block_len, 3000);
- if (ret != block_len) {
- perror("bulk write");
- return ret;
- }
- }
- } else if (data) {
- ret = usb_bulk_read(dev, ENDPT_IN, (char *) data, block_len, 4000);
- if (ret != block_len) {
- perror("bulk data read");
- }
- }
- // get ACK:
- len = sizeof(ansbuf);
- int retry = 0;
- do {
- ret = usb_bulk_read(dev, ENDPT_IN, (char *) ansbuf, len, 5000);
- if (ret != len) {
- perror("bulk ACK read");
- ret = DEVERR_TIMEOUT;
- }
- retry++;
- } while (ret == DEVERR_TIMEOUT && retry < 5);
- if (strncmp((char *) ansbuf, "USBS", 4)) {
- return handle_error("Got invalid reply\n");
- }
- // pass back return code set by peer:
- return ansbuf[12];
-}
-
-usb_dev_handle *dpf_usb_open(int index)
-{
- struct usb_device *d;
- usb_dev_handle *usb_dev;
-
- usb_init();
- usb_find_busses();
- usb_find_devices();
-
- d = find_dev(index);
- if (!d) {
- handle_error("No matching USB device found!");
- return NULL;
- }
-
- usb_dev = usb_open(d);
- if (usb_dev == NULL) {
- handle_error("Failed to open usb device!");
- return NULL;
- }
- usb_claim_interface(usb_dev, 0);
- return usb_dev;
-}
-
-
diff --git a/oncology/dpfhack_display/dpflib/sglib.h b/oncology/dpfhack_display/dpflib/sglib.h
deleted file mode 100644
index a2bc232e..00000000
--- a/oncology/dpfhack_display/dpflib/sglib.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <stdint.h>
-
-
-/* generic device wrapper: */
-
-const char* dev_errstr(int error);
-
-
-/* generic SCSI device stuff: */
-
-#define DIR_IN 0
-#define DIR_OUT 1
-
-
-/* Special functions */
-
-
-
-
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-26 13:56:54 +0000