Merge branch 'master' of github.com:krebscode/painload

81 files changed, 68593 insertions, 0 deletions

diff --git a/oncology/Makefile b/oncology/Makefile
new file mode 100644
index 00000000..258ee130
--- /dev/null
+++ b/oncology/Makefile
@@ -0,0 +1,22 @@
+build-deps:
+	#punani -Ei libtool automake autoconf zlib1g-dev libssl-dev python-dev libc6 libusb-dev libibus-dev subversion libgd2-noxpm-dev libgd2-noxpm lcd4linux
+
+/usr/bin/lcd4linux: build-deps
+	#punani -Ei lcd4linux
+	sed -i 's/usr\/sbin\/lcd4linux/usr\/bin\/lcd4linux/g' /etc/init.d/lcd4linux 
+	dpfhack_display/build-dpf-lcd4linux.sh
+	make -C dpfhack_display/lcd4linux/ install
+
+lcd4linux_autostart:
+	# service lcd4linux start
+	# update-rc.d lcd4linux
+
+install:  /usr/bin/lcd4linux /etc/lcd4linux.conf lcd4linux_autostart
+	# TODO this is debian only
+
+update: /etc/lcd4linux.conf
+
+/etc/lcd4linux.conf: lcd4linux.conf
+	chown krebs:krebs lcd4linux.conf
+	chmod 600 lcd4linux.conf
+	cp -a lcd4linux.conf /etc/lcd4linux.conf
diff --git a/oncology/bin/krebshostup b/oncology/bin/krebshostup
new file mode 100755
index 00000000..eb422ff7
--- /dev/null
+++ b/oncology/bin/krebshostup
@@ -0,0 +1,2 @@
+#!/bin/sh
+nmap -sP 10.7.7.0/24 -T5| grep "Host is up" | wc -l
diff --git a/oncology/dpfhack_display/Changelog b/oncology/dpfhack_display/Changelog
new file mode 100644
index 00000000..77fd1929
--- /dev/null
+++ b/oncology/dpfhack_display/Changelog
@@ -0,0 +1,33 @@
+v0.1alpha
+	* Pure hack, no own firmware.
+	* Only provides extension of the command set to support blitting
+
+Mon, 11 Apr 2011 11:55:52 +0200
+v0.11alpha
+	* Actually starting a changelog
+	* This is a full firmware replacement, but we still talk about a
+	  hack".  Once we have a fully bootable replacement, we'll reset
+	  version counting and start a new project.
+	LCD4linux (dpflib):
+	* Changed resolution query
+	* Support for orientation and backlight control
+	* Allow addressing of several frames ("Port" statement)
+	Firmware:
+	* Support for USB communication with restricted command set
+	  (kinda compatible to 0.1alpha)
+	* Support for various LCD controllers/screens (Sitronix, Orisetech,
+	  Ilitek, etc.)
+	* Locked flash access ('no-brick' mode for future upgrades)
+	* Power down mode: Full "deep sleep" with only RTC running
+	* Auto power down on low power
+	* Optional/experimental:
+		- Log ADC values to log sector on flash
+		- ADC voltage drawing over time (Menu: "Mon")
+		- Better Load/Exec support to download applets into the DPF via USB
+	* Frame specific issues:
+	    - The default orientation of the Pearl 320x240 frame was changed such
+	      that the USB connector is pointing down on normal display (i.e. we
+	      show "Portrait"). Use the pearl_landscape TYPE option for
+		  the original landscape mode.
+	    - The display rotation on the 128x128 DPFs is freely configureable
+	      using the Orientation option in the lcd4linux config file
diff --git a/oncology/dpfhack_display/Debug/dpf.so b/oncology/dpfhack_display/Debug/dpf.so
new file mode 100755
index 00000000..dc354c56
--- /dev/null
+++ b/oncology/dpfhack_display/Debug/dpf.so
diff --git a/oncology/dpfhack_display/Debug/libdpf.so b/oncology/dpfhack_display/Debug/libdpf.so
new file mode 100755
index 00000000..dc354c56
--- /dev/null
+++ b/oncology/dpfhack_display/Debug/libdpf.so
diff --git a/oncology/dpfhack_display/Makefile b/oncology/dpfhack_display/Makefile
new file mode 100644
index 00000000..c6c32e4f
--- /dev/null
+++ b/oncology/dpfhack_display/Makefile
@@ -0,0 +1,72 @@
+DISTVERSION = 0.12devel
+
+CURDIR = $(shell pwd)
+
+# Make sure this path is correct. Needs to point to dpf.h and libdpf.a
+DPFLIB = dpflib
+PYDPF = python
+
+FILES = Makefile lcd4linux-svn1142-dpf.patch README Changelog
+
+ifndef DESTDIR
+DESTDIR = /tmp
+endif
+
+default: $(DPFLIB)/libdpf.a
+	-[ -e src ] && (cd src; ./buildall.sh)
+	$(MAKE) -C $(PYDPF) install
+
+all: default lcd4linux/lcd4linux
+
+$(DPFLIB)/libdpf.a:
+	$(MAKE) -C $(DPFLIB) install
+
+lcd4linux/lcd4linux: $(DPFLIB)/libdpf.a
+	./build-dpf-lcd4linux.sh $(CURDIR)
+
+dist: installdist
+	tar cfz /tmp/dpfhack-$(DISTVERSION).tgz --numeric-owner -C $(DESTDIR) dpf
+
+
+PYSCRIPTS += detect.py fulldump.py profiles.py hackit.py
+PYSCRIPTS += chartbl.py update.py
+
+LIBFILES += Makefile dpflib.c fwload.c rawusb.c
+LIBFILES += sglib.h dpf.h 
+
+FILES += fw/README unixdll.mk
+FILES += $(PYDPF)/Makefile $(PYDPF)/py_device.c
+FILES += include/usbuser.h include/flash.h
+FILES += $(LIBFILES:%=$(DPFLIB)/%)
+FILES += $(wildcard src/p_*.s) $(wildcard src/jmptbl*.s)
+
+FILES += reverse/common.in reverse/dump.py reverse/Makefile reverse/README
+
+DPFINST = $(DESTDIR)/dpf
+
+installdist:
+	install -d $(DPFINST)
+	install -d $(DPFINST)/include
+	install -d $(DPFINST)/reverse
+	install -d $(DPFINST)/src
+	install -d $(DPFINST)/fw
+	install -d $(DPFINST)/dpflib
+	install -d $(DPFINST)/python
+	install -d $(DPFINST)/fw/hexfiles
+	install -m644 include/flash.h $(DPFINST)/include
+	cp -r fw/hexfiles $(DPFINST)/fw
+	install -m644 fw/font4x8.bin $(DPFINST)/fw
+	install -m755 $(PYSCRIPTS:%=fw/%) $(DPFINST)/fw
+	install -m755 build-dpf-lcd4linux.sh $(DPFINST)
+	for i in $(FILES); do \
+		install -m644 $$i $(DPFINST)/$$i; \
+	done
+	install -m600 dpf.conf $(DPFINST)
+	install -m600 dpfbig.conf $(DPFINST)
+	cd $(DPFINST)/fw; ln -sf ../Debug .
+
+clean:
+	rm -fr $(DPFINST)
+	$(MAKE) -C $(DPFLIB) clean
+	$(MAKE) -C $(PYDPF) clean
+	-[ -e lcd4linux/Makefile ] && (cd lcd4linux; make distclean)
diff --git a/oncology/dpfhack_display/README b/oncology/dpfhack_display/README
new file mode 100644
index 00000000..d7a57d8a
--- /dev/null
+++ b/oncology/dpfhack_display/README
@@ -0,0 +1,63 @@
+Usage:
+
+* Verify that you have a decent development system (GCC, development
+  libraries, subversion -- if you want to build lcd4linux) installed.
+  You might also have to install the package "pkg-config", or else the
+  configure procedure will likely fail.
+
+* Configure lcd4linux: normally, the default settings will do. If you wish
+  to use other drivers or cross compile, check build-dpf-lcd4linux.sh
+  for configure options
+
+* Note: For lcd4linux, you may want to have some development libraries
+  installed, for example:
+    libgd2-noxpm-dev  -- to display images
+
+* Build the stuff using "make all". You need an internet connection. because 
+  lcd4linux is pulled from their server.
+
+* Try it:
+  > cd lcd4linux; lcd4linux -f ../dpf.conf -F
+
+NOTE: The orientation for the Pearl type display was changed (Details, see
+Changelog) DO NOT INSTALL if you wish to keep your landscape orientation.
+Later, we'll make this configureable, if there turns out to be a good
+solution (there currently isn't).
+
+The source for this firmware is not yet included. Please don't ask
+questions when it will be released, it will happen, once we have a fully
+fool proof and working firmware including boot loader support (if you can
+help there, let us know).
+
+Also note: NO SUPPORT! NO WARRANTY! FRIENDS DON'T MAKE FRIENDS HACK THEIR
+DPF! LET ALONE NON-FRIENDS! (Bottomline: Don't ask me if I can hack your DPF).
+
+If you wish to hack your DPF, please check the sites listed below.
+
+----------------------------------------------------------------------------
+Troubleshooting
+
+If the lcd4linux build process fails, you may want to start over without
+running the entire build procedure.
+See build-dpf-lcd4linux.sh for the single steps. Right, this could also
+be in a makefile to be more fool proof..
+
+----------------------------------------------------------------------------
+Features
+
+For features of this firmware, see Changelog
+
+----------------------------------------------------------------------------
+Find updates and documentation here:
+
+http://tech.section5.ch/news/?p=68
+
+or here:
+
+http://picframe.spritesserver.nl/wiki/index.php/DPF_with_AppoTech_AX206
+
+For our german users, a very good explanation is found here:
+
+http://geekparadise.de/2011/04/digitaler-bilderrahmen-von-pearl-als-statusdisplay-fur-dockstar/
+
+(c) 4/2011, hackfin
diff --git a/oncology/dpfhack_display/build-dpf-lcd4linux.sh b/oncology/dpfhack_display/build-dpf-lcd4linux.sh
new file mode 100755
index 00000000..f2b8ceb2
--- /dev/null
+++ b/oncology/dpfhack_display/build-dpf-lcd4linux.sh
@@ -0,0 +1,52 @@
+#!/bin/bash
+
+PREREQUISITES='pkg-config aclocal automake autoconf'
+
+for i in $PREREQUISITES; do
+	if [ -z `which $i` ]; then
+		echo missing tool "'$i'". Please install package.
+		err=1
+	fi
+done
+	
+if [ $err ]; then
+	echo "Error, cancelling"
+	exit
+fi
+
+# Allow to pass on dpf distribution location, if not pwd:
+
+if [ -z $1 ]; then
+	DPFLIB_LOCATION=`pwd`
+else
+	DPFLIB_LOCATION=$1
+fi
+	
+if [ -e lcd4linux ]; then
+	echo "lcd4linux installed, not fetching"
+else
+	# Check out source from SVN
+	svn co -r1142 https://ssl.bulix.org/svn/lcd4linux/trunk lcd4linux
+fi
+
+cd lcd4linux
+
+# Apply patch
+if [ -e drv_dpf.c ]; then
+	echo "Existing drv_dpf.c found, not patching"
+else
+	patch -p1 < ../lcd4linux-svn1142-dpf.patch
+fi
+
+export CPPFLAGS="-I$DPFLIB_LOCATION/dpflib -I$DPFLIB_LOCATION/include"
+export LDFLAGS=-L$DPFLIB_LOCATION/dpflib
+
+if [ -e Makefile ]; then
+	echo "Not configuring, Makefile found"
+else
+	./bootstrap
+	# Feel free to configure this differently:
+	./configure --with-drivers=DPF --with-plugins=all --prefix=/usr
+fi
+
+make
diff --git a/oncology/dpfhack_display/dpf.conf b/oncology/dpfhack_display/dpf.conf
new file mode 100644
index 00000000..dc712675
--- /dev/null
+++ b/oncology/dpfhack_display/dpf.conf
@@ -0,0 +1,205 @@
+Display dpf {
+    Driver     'DPF'
+    Port       'usb0'
+    Font       '6x8'
+    Foreground 'ffffff'
+    Background '000000'
+    Basecolor  '000000'
+	Orientation 3          # Orientation value from 0-3
+	Backlight  backlight   # Backlight variable control
+}
+
+Widget OS {
+    class 'Text'
+    expression '*** '.uname('sysname').' '.uname('release').' - dpf driver by hackfin ***'
+    width 21
+    align 'M'
+    speed 200
+    update tick
+    Background '008000'
+    Foreground 'ffffff'
+}
+
+Widget CPU {
+    class  'Text'
+    expression  uname('machine')
+    prefix 'CPU '
+    width  10
+    align  'L'
+    update tick
+    Background 'FFFFFF00'
+}
+
+
+Widget RAM {
+    class  'Text'
+    expression meminfo('MemTotal')/1024
+    postfix ' MB RAM'
+    width  11
+    precision 0
+    align  'R'
+    update tick
+    Background 'FFFFFF00'
+}
+
+Widget Busy {
+    class 'Text'
+    expression proc_stat::cpu('busy', 500)
+    prefix 'Busy'
+    postfix '%'
+    width 10
+    precision 1
+    align 'R'
+    update tick
+    Foreground 'ffffff'
+    Background 'FFFFFF00'
+}
+
+Widget BusyBar {
+    class 'Bar'
+    expression  proc_stat::cpu('busy',   500)
+    expression2 proc_stat::cpu('system', 500)
+    length 21
+    direction 'E'
+    update tack
+    Foreground 'ffffff'
+    Background '00000080'
+    BarColor0 '5f5fff'
+    BarColor1 'ff5f5f'
+}
+
+Widget Load {
+    class 'Text'
+    expression loadavg(1)
+    prefix 'Load'
+    postfix loadavg(1)>1.0?'!':' '
+    width 10
+    precision 1
+    align 'R'
+    update tick
+    Foreground 'ffffff'
+    Background 'FFFFFF00'
+}
+
+Widget LoadBar {
+    class 'Bar'
+    expression  loadavg(1)
+    max 2.0
+    length 21
+    direction 'E'
+    update tack
+    Foreground 'ffffff'
+    Background '00000080'
+    BarColor0 '5f5fff'
+    BarColor1 'ff5f5f'
+}
+
+
+Widget Disk {
+    class 'Text'
+    # disk.[rw]blk return blocks, we assume a blocksize of 512
+    # to get the number in kB/s we would do blk*512/1024, which is blk/2
+    # expression (proc_stat::disk('.*', 'rblk', 500)+proc_stat::disk('.*', 'wblk', 500))/2
+    # with kernel 2.6, disk_io disappeared from /proc/stat but moved to /proc/diskstat
+    # therefore you have to use another function called 'diskstats':
+    expression diskstats('hd.', 'read_sectors', 500) + diskstats('hd.', 'write_sectors', 500)
+    prefix 'disk'
+    postfix ' '
+    width 10
+    precision 0
+    align 'R'
+    update tick
+    Foreground 'ffffff'
+    Background 'FFFFFF00'
+}
+
+Widget DiskBar {
+    class 'Bar'
+    #expression  proc_stat::disk('.*', 'rblk', 500)
+    #expression2 proc_stat::disk('.*', 'wblk', 500)
+    # for kernel 2.6:
+    expression  diskstats('sd.', 'read_sectors',  500)
+    expression2 diskstats('sd.', 'write_sectors', 500)
+    length 21
+    direction 'E'
+    update tack
+    Foreground 'ffffff'
+    Background '00000080'
+    BarColor0 '5f5fff'
+    BarColor1 'ff5f5f'
+}
+
+Widget Eth0 {
+    class 'Text'
+    expression (netdev('wlan0', 'Rx_bytes', 500)+netdev('wlan0', 'Tx_bytes', 500))/1024
+    prefix 'wlan0'
+    postfix ' '
+    width 10
+    precision 0
+    align 'R'
+    update tick
+    Foreground 'ffffff'
+    Background 'FFFFFF00'
+}
+
+Widget Eth0Bar {
+    class 'Bar'
+    expression  netdev('wlan0', 'Rx_bytes', 500)
+    expression2 netdev('wlan0', 'Tx_bytes', 500)
+    length 21
+    direction 'E'
+    update tack
+    Foreground 'ffffff'
+    Background '00000080'
+    BarColor0 '5f5fff'
+    BarColor1 'ff5f5f'
+}
+
+Widget Uptime {
+    class 'Text'
+    expression uptime('%d days %H:%M:%S')
+    width 20
+    align 'R'
+    prefix 'Up '
+    update 1000
+    Background 'FFFFFF00'
+}
+
+Widget Bgnd {
+    class 'Image'
+    file 'bgnd.png'
+    reload 1
+    update 5000