lcd4linux: removed trash

1 files changed, 0 insertions, 389 deletions

diff --git a/oncology/dpfhack_display/lcd4linux/.svn/text-base/drv_Noritake.c.svn-base b/oncology/dpfhack_display/lcd4linux/.svn/text-base/drv_Noritake.c.svn-base
deleted file mode 100644
index 6287736d..00000000
--- a/oncology/dpfhack_display/lcd4linux/.svn/text-base/drv_Noritake.c.svn-base
+++ /dev/null
@@ -1,389 +0,0 @@
-/* $Id$
- * $URL$
- * 
- * Driver for a Noritake GU128x32-311 graphical display.
- * 
- * Copyright (C) 2005 Julien Aube <ob@obconseil.net>
- * Copyright (C) 2005 The LCD4Linux Team <lcd4linux-devel@users.sourceforge.net>
- *
- * This file is part of LCD4Linux.
- *
- * LCD4Linux is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * LCD4Linux is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * *** Noritake Itron GU128x32-311 ***
- * A 128x32 VFD (Vacuum Fluorescent Display).
- * It is driver by a Hitachi microcontroller, with a specific 
- * firmware. 
- * The datasheet can be easily found on the internet by searching for the 
- * the name of the display, it's a PDF file that describe the timing, and 
- * the protocol to communicate with the Hitachi microcontroller.
- * 
- * The display support 2 modes (that can be mutiplexed), one text mode
- * thanks to an integrated character generator, and provide 4 lines of 
- * 21 caracters.
- * There is also a graphical mode that can be used to switch on or off
- * each one if the 128x32 pixels. (monochrome).
- * 
- * The protocol include the possibility to clear the display memory quickly,
- * change the luminosity, swich the display on or off (without affecting the 
- * content of the memory) and finally change the "page" or the caracter 
- * generator. Two pages are available in the ROM, all the characters are 
- * listed in the documentation.
- *
- * This driver support only the character mode at the moment.
- * A future release will support the graphical mode as an option.
- * 
- * This driver is released under the GPL.
- */
-
-/* 
- *
- * exported fuctions:
- *
- * struct DRIVER drv_Noritake
- *
- */
-
-#include "config.h"
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-
-#include "debug.h"
-#include "cfg.h"
-#include "qprintf.h"
-#include "plugin.h"
-#include "widget.h"
-#include "widget_text.h"
-#include "widget_icon.h"
-#include "widget_bar.h"
-#include "drv.h"
-#include "udelay.h"
-#include "drv_generic_text.h"
-#include "drv_generic_parport.h"
-
-
-static char Name[] = "Noritake";
-
-typedef struct {
-    int type;
-    char *name;
-    int rows;
-    int cols;
-    int xres;
-    int yrex;
-    int goto_cost;
-    int protocol;
-} MODEL;
-
-static int Model, Protocol;
-static MODEL Models[] = {
-    {0x01, "GU311", 4, 21, 6, 8, 5, 1},
-    {0x02, "GU311_Graphic", 4, 21, 6, 8, 6, 1},
-    {0xff, "Unknown", -1, -1, -1, -1, -1, -1}
-};
-
-static unsigned char SIGNAL_CS;	/* Chip select, OUTPUT, negative logic, pport AUTOFEED */
-static unsigned char SIGNAL_WR;	/* Write        OUTPUT, negative logic, pport STOBE */
-static unsigned char SIGNAL_RESET;	/* Reset,       OUTPUT, negative logic, pport INIT */
-static unsigned char SIGNAL_BLANK;	/* Blank,       OUTPUT , negative logic, pport SELECT-IN */
-
-#if 0
-static unsigned char SIGNAL_BUSY;	/* Busy,        INPUT , positive logic, pport BUSY, not used */
-static unsigned char SIGNAL_FRP;	/* Frame Pulse, INPUT , positive logic, pport ACK, not used */
-#endif
-
-void (*drv_Noritake_clear) (void);
-
-/* Data port is positive logic */
-
-
-/****************************************/
-/***  hardware dependant functions    ***/
-/****************************************/
-
-/* Low-level parport driving functions */
-
-/* This function was used to pool the BUSY line on the parallel port, which 
-can be linked to the BUSY line on the display. But since it works 
-with a timed wait, this function is not necessary, and is kept just in case.*/
-#if 0
-static void drv_GU311_wait_busy(void)
-{
-    char c;
-
-    c = drv_generic_parport_status();
-    while ((c & SIGNAL_BUSY) == 0) {
-	ndelay(200);		/* Wait 100ns before next consultation of BUSY line 
-				   if the first one was not successful */
-	c = drv_generic_parport_status();
-    }
-}
-#endif
-
-
-static void drv_GU311_send_char(char c)
-{
-#if 0
-    /* Disabled because all the cables does not have the busy line linked. */
-    drv_GU311_wait_busy();	/* ensuite the display is ready to take the command */
-#endif
-    drv_generic_parport_data(c);
-    ndelay(30);			/* delay to ensure data line stabilisation on long cables */
-    drv_generic_parport_control(SIGNAL_WR, 0);	/* write line to enable */
-    ndelay(150);		/* data hold time */
-    drv_generic_parport_control(SIGNAL_WR, 0xff);	/* write line to disable */
-    ndelay(75);			/* From spec : minimum time before next command */
-}
-
-static void drv_GU311_send_string(char *str, int size)
-{
-    int i;
-    for (i = 0; i < size; i++)
-	drv_GU311_send_char(str[i]);
-
-}
-
-/* Command-string elaboration functions */
-static void drv_GU311_make_text_string(const int row, const int col, const char *data, int len)
-{
-    static char cmd[96] = { 0x01, 'C', 0, 0, 'S', 0 };
-    unsigned char start_addr;
-
-    /* Cols are 0x00..0x15, on 4 lines. */
-    start_addr = (0x16 * row) + col;
-    if (start_addr > 0x57)
-	return;
-    if (len > 0x57)
-	return;
-
-    cmd[2] = start_addr;
-    cmd[3] = len;
-
-    memcpy(cmd + 5, data, len);
-
-    drv_GU311_send_string(cmd, len + 5);
-
-}
-
-/* API functions */
-
-static void drv_GU311_clear(void)
-{
-    static char clear_cmd[] = { 0x01, 'O', 'P' };
-    drv_GU311_send_string(clear_cmd, sizeof(clear_cmd));
-    ndelay(500);		/* Delay for execution - this command is the longuest */
-}
-
-
-static void drv_GU311_write(const int row, const int col, const char *data, int len)
-{
-    drv_GU311_make_text_string(row, col, data, len);
-}
-
-
-static void drv_GU311_reset(void)
-{
-    drv_generic_parport_control(SIGNAL_RESET, 0);	/* initiate reset */
-    ndelay(1000);		/* reset hold time 1ms */
-    drv_generic_parport_control(SIGNAL_RESET, 0xff);
-    ndelay(200000);		/* reset ready time 200ms */
-
-}
-
-
-static int drv_GU311_start(const char *section)
-{
-    char cmd[3] = { 0x01, 'O' };
-
-    /* Parallel port opening and association */
-    if (drv_generic_parport_open(section, Name) < 0)
-	return -1;
-    if ((SIGNAL_CS = drv_generic_parport_wire_ctrl("CS", "AUTOFD")) == 0xff)
-	return -1;
-    if ((SIGNAL_WR = drv_generic_parport_wire_ctrl("WR", "STROBE")) == 0xff)
-	return -1;
-    if ((SIGNAL_RESET = drv_generic_parport_wire_ctrl("RESET", "INIT")) == 0xff)
-	return -1;
-    if ((SIGNAL_BLANK = drv_generic_parport_wire_ctrl("BLANK", "SLCTIN")) == 0xff)
-	return -1;
-    /* SIGNAL_BUSY=PARPORT_STATUS_BUSY; *//* Not currently needed */
-    /* SIGNAL_FRP=PARPORT_STATUS_ACK;   *//* Not currently needed */
-
-    /* Signals configuration */
-    drv_generic_parport_direction(0);	/* parallel port in output mode */
-    drv_generic_parport_control(SIGNAL_CS | SIGNAL_WR | SIGNAL_RESET | SIGNAL_BLANK, 0xff);
-    /* All lines to "deactivate", -> 1 level on the wire */
-    drv_generic_parport_control(SIGNAL_CS, 0);	/* CS to 0 all the time, write done by WR */
-    drv_GU311_reset();
-
-    /* Ready for commands from now on. */
-
-    /* Display configuration */
-    cmd[2] = '0';
-    drv_GU311_send_string(cmd, sizeof(cmd));	/* Select char. page 0 */
-    cmd[2] = 'Q';
-    drv_GU311_send_string(cmd, sizeof(cmd));	/* Select 'Quick Mode' */
-    cmd[2] = 'a';
-    drv_GU311_send_string(cmd, sizeof(cmd));	/* Brightness at 100% */
-    cmd[2] = 'T';
-    drv_GU311_send_string(cmd, sizeof(cmd));	/* Ensure display ON */
-
-    drv_Noritake_clear();
-    return 0;
-}
-
-
-
-static int drv_Noritake_start(const char *section)
-{
-    char *model = 0;
-    int i;
-    model = cfg_get(section, "Model", NULL);
-    if (model != NULL && *model != '\0') {
-	for (i = 0; Models[i].type != 0xff; i++) {
-	    if (strcasecmp(Models[i].name, model) == 0)
-		break;
-	}
-	if (Models[i].type == 0xff) {
-	    error("%s: %s.Model '%s' is unknown from %s", Name, section, model, cfg_source());
-	    return -1;
-	}
-	Model = i;
-	info("%s: using model '%s'", Name, Models[Model].name);
-    } else {
-	error("%s: no '%s.Model' entry from %s", Name, section, cfg_source());
-	return -1;
-    }
-
-    DROWS = Models[Model].rows;
-    DCOLS = Models[Model].cols;
-    XRES = Models[Model].xres;
-    YRES = Models[Model].xres;
-    GOTO_COST = Models[Model].goto_cost;
-    Protocol = Models[Model].protocol;
-    /* display preferences */
-    CHARS = 0;			/* number of user-defineable characters */
-    CHAR0 = 0;			/* ASCII of first user-defineable char */
-
-
-
-    /* real worker functions */
-    drv_Noritake_clear = drv_GU311_clear;
-    if (Models[Model].type == 0x01) {
-	drv_generic_text_real_write = drv_GU311_write;
-    } else {
-	error("%s: Unsupported display. Currently supported are : GU311.", Name);
-	return -1;
-    }
-    return drv_GU311_start(section);
-}
-
-
-/****************************************/
-/***            plugins               ***/
-/****************************************/
-
-/* none */
-
-
-/****************************************/
-/***        widget callbacks          ***/
-/****************************************/
-
-
-/* using drv_generic_text_draw(W) */
-
-
-/****************************************/
-/***        exported functions        ***/
-/****************************************/
-
-
-/* list models */
-int drv_Noritake_list(void)
-{
-    printf("GU311 GU311_Graphic");
-    return 0;
-}
-
-
-/* initialize driver & display */
-int drv_Noritake_init(const char *section, const int quiet)
-{
-    WIDGET_CLASS wc;
-    int ret;
-
-    info("%s: %s", Name, "$Rev$");
-
-    /* start display */
-    if ((ret = drv_Noritake_start(section)) != 0)
-	return ret;
-
-    /* initialize generic text driver */
-    if ((ret = drv_generic_text_init(section, Name)) != 0)
-	return ret;
-
-    /* register text widget */
-    wc = Widget_Text;
-    wc.draw = drv_generic_text_draw;
-    widget_register(&wc);
-
-    /* register plugins */
-    /* none */
-
-    if (!quiet) {
-	char buffer[40];
-	qprintf(buffer, sizeof(buffer), "%s %dx%d", Name, DCOLS, DROWS);
-	if (drv_generic_text_greet(buffer, NULL)) {
-	    sleep(3);
-	    drv_Noritake_clear();
-	}
-    }
-
-    return 0;
-}
-
-
-/* close driver & display */
-int drv_Noritake_quit(const int quiet)
-{
-
-    info("%s: shutting down.", Name);
-
-    /* clear display */
-    drv_Noritake_clear();
-
-    /* say goodbye... */
-    if (!quiet) {
-	drv_generic_text_greet("goodbye!", NULL);
-    }
-
-    drv_generic_parport_close();
-    drv_generic_text_quit();
-    return (0);
-}
-
-
-DRIVER drv_Noritake = {
-    .name = Name,
-    .list = drv_Noritake_list,
-    .init = drv_Noritake_init,
-    .quit = drv_Noritake_quit,
-};