Merge branch 'master' of https://github.com/krebscode/painload

6 files changed, 1210 insertions, 0 deletions

diff --git a/oncology/dpfhack_display/dpflib/Makefile b/oncology/dpfhack_display/dpflib/Makefile
new file mode 100644
index 00000000..79010b6d
--- /dev/null
+++ b/oncology/dpfhack_display/dpflib/Makefile
@@ -0,0 +1,24 @@
+OBJS = dpflib.o rawusb.o
+
+CFLAGS = -Wall -fPIC -I../include -g
+
+ifndef DESTDIR
+	DESTDIR = ..
+endif
+
+all: libdpf.a fwload
+
+fwload: fwload.o libdpf.a
+	$(CC) -o $@ fwload.o -L. -ldpf -lusb
+
+testusb: testusb.o libdpf.a
+	$(CC) -o $@ testusb.o -L. -ldpf -lusb
+
+libdpf.a: $(OBJS)
+	ar ruv $@ $(OBJS)
+
+clean:
+	rm -f fwload libdpf.a *.o
+
+install: all
+	cp fwload libdpf.a $(DESTDIR)
diff --git a/oncology/dpfhack_display/dpflib/dpf.h b/oncology/dpfhack_display/dpflib/dpf.h
new file mode 100644
index 00000000..ba6c05d8
--- /dev/null
+++ b/oncology/dpfhack_display/dpflib/dpf.h
@@ -0,0 +1,143 @@
+/** libdpf header file
+ *
+ * (c) 2010, 2011 <hackfin@section5.ch>
+ *
+ */
+
+#include <usb.h>
+#include "usbuser.h"
+
+#define ADDR unsigned int
+
+#define MODE_SG  0x00  ///< generic device mode (original)
+#define MODE_USB 0x01  ///< libusb operation mode (hacked)
+#define FLAG_CAN_LOCK 0x80  ///< Has the locking feature (new firmware)
+
+enum {
+	DEVERR_FILE = -16,
+	DEVERR_OPEN,
+	DEVERR_HEX,
+	DEVERR_CHK,
+	DEVERR_IO,
+	DEVERR_MALLOC,
+	DEVERR_TIMEOUT,
+};
+
+/** The DPF context structure */
+
+typedef
+struct dpf_context {
+	unsigned char mode;
+	unsigned char flags;
+	union {
+		usb_dev_handle *udev;
+		int fd;
+	} dev;
+	unsigned int width;
+	unsigned int height;
+	int bpp;
+	int proto;
+	char* buff;
+	unsigned char* oldpix;
+	int offx;
+	int offy;
+} DPFContext;
+
+/** A value proxy for the property API */
+typedef struct dpf_proxy {
+	union {
+		short	integer;
+		char   *sequence;
+	} value;
+	char type;
+} DPFValue;
+
+enum {
+	TYPE_INTEGER,
+	TYPE_STRING,
+}; 
+
+#define DPFHANDLE struct dpf_context *
+
+/**
+ Opens the DPF device. if dev is not NULL, open device, otherwise, look for
+ USB device.
+ */
+int dpf_open(const char *dev, DPFHANDLE *h);
+
+/** Close DPF device */
+void dpf_close(DPFHANDLE h);
+
+/*
+ */
+void dpf_writefb(DPFHANDLE h, unsigned char *fb);
+
+int dpf_screen_blit(DPFHANDLE h, const unsigned char *buf, short rect[4]);
+
+/** Set property on DPF
+ * \param token       Property token
+ * \param value       Pointer to value
+ */
+int dpf_setproperty(DPFHANDLE h, int token, const DPFValue *value);
+
+/* USB raw */
+
+int emulate_scsi(usb_dev_handle *d, unsigned char *cmd, int cmdlen, char out,
+	unsigned char *data, unsigned long block_len);
+
+const char *dev_errstr(int err);
+
+// Private stuff:
+usb_dev_handle *dpf_usb_open(int index);
+int sgdev_open(const char *portname, int *fd);
+
+////////////////////////////////////////////////////////////////////////////
+// FLASH stuff
+
+// Maximum size for flash_read
+#define MAX_CHUNKSIZE 0x10000
+
+int read_mem(DPFHANDLE h, unsigned char *buf, ADDR offset, int len);
+int write_mem(DPFHANDLE h, const char *hexfile);
+int code_go(DPFHANDLE h, ADDR start);
+
+int dpf_bootstrap(DPFHANDLE h,
+	ADDR dst, unsigned char *src, unsigned short n, ADDR start);
+
+int flash_cmd(DPFHANDLE h, int command, int cmdlen, ADDR addr);
+int flash_probe(DPFContext *h, unsigned char *id);
+int flash_erase(DPFHANDLE h, ADDR offset);
+int flash_write(DPFHANDLE h, const unsigned char *buf, ADDR offset, int len);
+int flash_read(DPFHANDLE h, unsigned char *buf, ADDR offset, int len);
+
+int load_ihx(const char *fname, unsigned char *data, 
+	unsigned int *buflen, unsigned int reloc);
+
+int patch_sector(DPFHANDLE h,
+	ADDR reloc, unsigned long addr, const char *hexfile);
+
+////////////////////////////////////////////////////////////////////////////
+/* DPF specific stuff: */
+
+#define RGB565_0(r, g, b) \
+	(( ((r) & 0xf8)		 ) | (((g) & 0xe0) >> 5))
+#define RGB565_1(r, g, b) \
+	(( ((g) & 0x1c) << 3 ) | (((b) & 0xf8) >> 3))
+
+#define RGB565(r, g, b) { RGB565_0(r, g, b), RGB565_1(r, g, b) }
+
+int dpf_copy(ADDR dst, unsigned char *src, unsigned short n);
+
+// int clr_screen(DPFHANDLE h, const unsigned char *col);
+int write_screen(DPFHANDLE h, const unsigned char *buf, unsigned int len);
+
+
+// Some internal address offsets. They may change, but so far all types
+// seem to have the same
+//
+// w: word, <n>: length, [LE, BE]
+//
+// FIXME: Use packed struct later.
+
+// FIXME: Should be 0x0020, once we have the firmware replaced
+#define OFFSET_PROPS 0x3f0020   ///< w[2]:LE : Resolution X, Y
diff --git a/oncology/dpfhack_display/dpflib/dpflib.c b/oncology/dpfhack_display/dpflib/dpflib.c
new file mode 100644
index 00000000..e248eb09
--- /dev/null
+++ b/oncology/dpfhack_display/dpflib/dpflib.c
@@ -0,0 +1,707 @@
+/** DPF access library for AX206 based HW
+ *
+ * 12/2010 <hackfin@section5.ch>
+ *
+ * This is an ugly hack, because we use existing SCSI vendor specific
+ * extensions to pass on our requests to the DPF.
+ *
+ * One day we might use a proper protocol like netpp.
+ *
+ */
+	
+// FIXME: Put all those SCSI commands in one (wrapped) place.
+
+#include "dpf.h"
+#include "sglib.h"
+
+#include "flash.h"
+#include <fcntl.h>
+#include "usbuser.h" // our user defined flash commands
+#include <unistd.h>
+#include <stdio.h>
+#include <errno.h>
+#include <string.h>
+#include <scsi/scsi.h>
+#include <scsi/sg.h>
+#include <sys/ioctl.h>
+
+#ifdef DEBUG
+#define DEB(x) x
+#else
+#define DEB(x)
+#endif
+
+/** Vendor command for our hacks */
+static
+unsigned char g_excmd[16] = {
+	0xcd, 0, 0, 0,
+	   0, 6, 0, 0,
+	   0, 0, 0, 0,
+	   0, 0, 0, 0
+};
+
+int do_scsi(int fd, unsigned char *cmd, int cmdlen, char out,
+	unsigned char *data, unsigned long block_len)
+{
+	int error;
+	unsigned char sensebuf[32];
+	sg_io_hdr_t io_hdr;
+    memset(&io_hdr, 0, sizeof(sg_io_hdr_t));
+
+    io_hdr.interface_id = 'S';
+    io_hdr.sbp = sensebuf;
+    io_hdr.mx_sb_len = sizeof(sensebuf);
+	if (data == 0) {
+		io_hdr.dxfer_direction = SG_DXFER_NONE;
+	} else {
+		if (out) {
+			io_hdr.dxfer_direction = SG_DXFER_TO_DEV;
+		} else {
+			io_hdr.dxfer_direction = SG_DXFER_FROM_DEV;
+		}
+	}
+    io_hdr.dxferp = data;
+    io_hdr.dxfer_len = block_len;
+    io_hdr.cmdp = cmd;
+    io_hdr.cmd_len = cmdlen;
+    io_hdr.timeout = 5000; // in ms
+	error = ioctl(fd, SG_IO, &io_hdr);
+	if (error < 0) perror("calling SCSI ioctl()");
+	return error;
+}
+
+int wrap_scsi(DPFContext *h, unsigned char *cmd, int cmdlen, char out,
+	unsigned char *data, unsigned long block_len)
+{
+	int error;
+	if (h->mode == MODE_USB) {
+		error = emulate_scsi(h->dev.udev, cmd, cmdlen, out, data, block_len);
+	} else {
+		error = do_scsi(h->dev.fd, cmd, cmdlen, out, data, block_len);
+	}
+	return error;
+}
+
+/* device wrapper */
+
+const char idstring[] = "buildwin Photo Frame    1.01";
+
+#define INQ_REPLY_LEN 96
+
+int sgdev_open(const char *portname, int *fd)
+{
+	int error;
+
+	static
+	unsigned char inquiry[] = {
+		INQUIRY, 0, 0, 0,
+		INQ_REPLY_LEN, 0
+	};
+
+	static unsigned char inqbuf[INQ_REPLY_LEN + 2];
+
+	*fd = open(portname, O_RDONLY | O_NONBLOCK );
+	error = do_scsi(*fd, inquiry, sizeof(inquiry), DIR_IN, inqbuf,
+		INQ_REPLY_LEN);
+	
+	if (error < 0) {
+		fprintf(stderr, "SCSI inquiry failed\n");
+		close(*fd); error = DEVERR_OPEN;
+	} else 
+	if (memcmp(idstring, &inqbuf[8], sizeof(idstring) - 1) != 0) {
+		close(*fd); error = DEVERR_OPEN;
+		fprintf(stderr, "Not a photo frame. Refuse to open device.\n");
+	}
+	return error;
+}
+
+static
+int probe(DPFHANDLE h)
+{
+	int ret;
+
+	// We abuse a command that just responds with a '0' status in the
+	// original firmware.
+	static unsigned char buf[5];
+
+
+	static
+	unsigned char cmd[16] = {
+		0xcd, 0, 0, 0,
+		   0, 3, 0, 0,
+		   0, 0, 0, 0,
+		   0, 0, 0, 0
+	};
+
+	cmd[5] = 3;
+	ret = wrap_scsi(h, cmd, sizeof(cmd), DIR_IN, 0, 0);
+
+	switch (ret) {
+		case 0:
+			// The original protocol.
+			fprintf(stderr,
+				"Warning: This firmware can not lock the flash\n");
+			break;
+		case 1:
+			// The improved hack
+			h->flags |= FLAG_CAN_LOCK;
+			break;
+	}
+
+	cmd[5] = 2; // get LCD parameters
+	ret = wrap_scsi(h, cmd, sizeof(cmd), DIR_IN, buf, 5);
+	h->width = (buf[0]) | (buf[1] << 8);
+	h->height = (buf[2]) | (buf[3] << 8);
+	h->bpp = 2;
+
+	return ret;
+}
+
+/*
+static
+int dpf_query(DPFHANDLE h)
+{
+	int ret;
+	unsigned char buf[64];	// Do not change size
+
+	static
+	unsigned char cmd[16] = {
+		0xcd, 0, 0, 0,
+		   0, 3, 0, 0,
+		   0, 0, 0, 0,
+		   0, 0, 0, 0
+	};
+
+	return wrap_scsi(h, cmd, sizeof(cmd), DIR_IN, buf, sizeof(buf));
+}
+*/
+
+
+
+int dpf_open(const char *dev, DPFHANDLE *h)
+{
+	int error = 0;
+	DPFContext *dpf;
+	int i;
+	usb_dev_handle *u;
+
+	int fd;
+
+	if (!dev) {
+		fprintf(stderr, "Please specify a string like 'usb0' or a sg device\n");
+		return DEVERR_OPEN;
+	}
+
+	if (strncmp(dev, "usb", 3) == 0) {
+		i = dev[3] - '0';
+		u = dpf_usb_open(i);
+		if (!u) return DEVERR_OPEN;
+		i = MODE_USB;
+	} else {
+		fprintf(stderr, "Opening generic SCSI device '%s'\n", dev);
+		if (sgdev_open(dev, &fd) < 0) return DEVERR_OPEN;
+		i = MODE_SG;
+	}
+
+	dpf = (DPFHANDLE) malloc(sizeof(DPFContext));
+	if (!dpf) return DEVERR_MALLOC;
+
+	dpf->flags = 0;
+	dpf->mode = i;
+
+	if (dpf->mode == MODE_USB) {
+		dpf->dev.udev = u;
+		error = probe(dpf);
+		fprintf(stderr, "Got LCD dimensions: %dx%d\n", dpf->width, dpf->height);
+	} else {
+		dpf->dev.fd = fd;
+	}
+
+	*h = dpf;
+	return error;
+}
+
+void dpf_close(DPFContext *h)
+{
+	switch (h->mode) {
+		case MODE_SG:
+			close(h->dev.fd);
+			break;
+		case MODE_USB:
+			usb_release_interface(h->dev.udev, 0);
+			usb_close(h->dev.udev);
+			break;
+	}
+	free(h);
+}
+
+const char *dev_errstr(int err)
+{
+	switch (err) {
+	case DEVERR_FILE: return "File I/O error";
+	case DEVERR_OPEN: return "File open error";
+	case DEVERR_HEX: return "Hex file error";
+	case DEVERR_CHK: return "Checksum error";
+	case DEVERR_IO: return "Common I/O error";
+	default: return "Unknown error";
+	}
+}
+
+/* Flash stuff */
+
+int flash_cmd(DPFContext *h, int command, int cmdlen, ADDR addr)
+{
+	static
+	unsigned char cmd[16] = {
+		0xcb, 0, 0, 0, 0, 0,
+		1, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0
+	};
+
+	cmd[10] = command;
+	cmd[6] = cmdlen;
+
+	// Sector number or addr:
+	cmd[13] = addr;
+	cmd[12] = addr >> 8;
+	cmd[11] = addr >> 16;
+
+	return wrap_scsi(h, cmd, sizeof(cmd), DIR_IN, 0, 0);
+}
+
+
+int flash_read(DPFContext *h, unsigned char *buf, ADDR offset, int len)
+{
+	static
+	unsigned char cmd[16] = {
+		0xcd, 0, 0, 0, 0, 0,
+		0x04, /* num of bytes: */ 0, 0, 0,
+		SPM_READ, /* SPI offset: */ 0, 0, 0,
+		0, 0
+	};
+
+	cmd[9] = len >> 0;
+	cmd[8] = len >> 8;
+	cmd[7] = len >> 16;
+
+	cmd[13] = offset >> 0;
+	cmd[12] = offset >> 8;
+	cmd[11] = offset >> 16;
+
+	return wrap_scsi(h, cmd, sizeof(cmd), DIR_IN, buf, len);
+}
+
+static
+int flash_writechunk(DPFContext *h, const unsigned char *buf, ADDR offset, int len)
+{
+	static
+	unsigned char cmd[16] = {
+		0xcb, 0, 0, 0, 0, 0,
+		4, /* num of bytes: */ 0, 0, 0,
+		SPM_PP, /* SPI offset: */ 0, 0, 0,
+		0, 0
+	};
+
+	cmd[9] = len >> 0;
+	cmd[8] = len >> 8;
+	cmd[7] = len >> 16;
+
+	cmd[13] = offset >> 0;
+	cmd[12] = offset >> 8;
+	cmd[11] = offset >> 16;
+
+	return wrap_scsi(h, cmd, sizeof(cmd), DIR_OUT,
+		(unsigned char*) buf, len);
+}
+
+int flash_write(DPFContext *h, const unsigned char *buf, ADDR offset, int len)
+{
+	int i;
+	int error = 0;
+
+	for (i = 0; i < len; i += 0x1000) {
+		error = flash_cmd(h, SPM_WREN, 1, 0);
+		DEB(printf("Write pages at %06x\n", offset));
+		error = flash_writechunk(h, buf, offset, 0x1000);
+		if (error < 0) break;
+		buf += 0x1000; offset += 0x1000;
+	}
+	return error;
+}
+
+
+int load_ihx(const char *fname, unsigned char *data, 
+	unsigned int *buflen, unsigned int reloc)
+{
+	unsigned char csum_is, csum_need;
+	int ret;
+	FILE *f;
+
+	static char line[512];
+	static unsigned char buf[0x100];
+	int count;
+	unsigned int addr, len, type;
+	unsigned short b;
+	unsigned int total = 0;
+
+	DEB(printf("Opening %s...\n", fname));
+    f = fopen(fname, "r");
+    if (f == NULL) {
+        return DEVERR_OPEN; 
+    }
+
+    while(1) {
+        fgets(line, sizeof(line), f);
+
+        if (feof(f) || ferror(f)) break;
+
+        if ((line[0] != ':') || (strlen(line) < 9)) {
+            fprintf(stderr, "invalid line in ihx\n");
+            break;
+        }
+
+        ret = sscanf(&line[1], "%02x", &len);
+        if (ret != 1) { ret = DEVERR_HEX; break; }
+
+        ret = sscanf(&line[3], "%04x", &addr);
+        if (ret != 1) { ret = DEVERR_HEX; break; }
+
+        ret = sscanf(&line[7], "%02x", &type);
+        if (ret != 1) { ret = DEVERR_HEX; break; }
+
+#ifdef DEBUG
+        printf("len %u addr %04x type %u\n", len, addr, type);
+#endif
+
+        if (type == 1) break;
+
+        if (type != 0) {
+            fprintf(stderr, "ihx: unknown type %u\n", type);
+            continue;
+        }
+
+        csum_need = len + (addr & 0xff) + (addr >> 8) + type;
+
+		total += len;
+		if (total > *buflen) {
+			fprintf(stderr, "Buffer length exceeded. IHX file too big.\n");
+			ret = DEVERR_HEX;
+			break;
+		}
+
+		if (len > sizeof(buf)) {
+			fprintf(stderr, "Buffer length exceeded. Too long lines.\n");
+			ret = DEVERR_HEX;
+			break;
+		}
+
+        for(count = 0; count < len; count++) {
+            ret = sscanf(&line[9 + count * 2], "%02hx", &b);
+            if (ret != 1) {
+                fprintf(stderr, "hex file: could not parse data!\n");
+                break;
+            }
+
+            buf[count] = b;
+            csum_need += buf[count];
+        }
+
+        if (ret != 1) { ret = DEVERR_HEX; break; }
+
+        ret = sscanf(&line[9 + len * 2], "%02hx", &b);
+        if (ret != 1) { ret = DEVERR_HEX; break; }
+
+        csum_is = b;
+        if (((csum_need+csum_is) & 0xff) != 0x00) {
+            fprintf(stderr, "ihx: checksum failure! is: %02x should be:%02x\n",
+                   csum_is, csum_need);
+            ret = DEVERR_CHK;
+			break;
+        }
+
+		if (addr < reloc) {
+			fprintf(stderr, "Bad relocation value\n");
+			ret = DEVERR_HEX;
+			break;
+		}
+		// Copy to data buffer at relocated address
+		if (data) {
+			DEB(printf("Patching at offset %08x, chunk size %d\n",
+				addr - reloc, len));
+			memcpy(&data[addr - reloc], buf, len);
+		} else {
+			DEB(printf("Writing to %04x (CODE: %04x), chunk size %d\n",
+				addr - reloc, addr, len));
+			dpf_copy(addr - reloc, buf, len);
+		}
+    }
+	*buflen = total;
+    fclose(f);
+	return ret;
+}
+
+
+int flash_probe(DPFContext *h, unsigned char *id)
+{
+	int error;
+	static
+	unsigned char buf[64];
+	static
+	unsigned char cmd[16] = {
+		0xcd, 0, 0, 0, 0, 0,
+		1, sizeof(buf) >> 16, sizeof(buf) >> 8, sizeof(buf) >> 0,
+		// flash command sequence:
+		SPM_RDID, 0, 0, 0,
+		0, 0
+	};
+
+	error = wrap_scsi(h, cmd, sizeof(cmd), DIR_IN, buf, sizeof(buf));
+	id[0] = buf[0]; id[1] = buf[1]; id[2] = buf[2];
+	return error;
+}
+
+int flash_erase(DPFContext *h, ADDR addr)
+{
+	int error;
+	error = flash_cmd(h, SPM_RES, 1, 0);
+	error = flash_cmd(h, SPM_WREN, 1, 0);
+	error = flash_cmd(h, SPM_WRSR, 2, 0); // clr status
+
+	// now erase flash sector:
+	error = flash_cmd(h, SPM_WREN, 1, 0);
+	error = flash_cmd(h, SPM_FLASH_SE, 4, addr);
+	return error;
+}
+
+void dpf_flash_lock(DPFContext *h, char enable)
+{
+	unsigned char *cmd = g_excmd;
+
+	if (!(h->flags & FLAG_CAN_LOCK)) return;
+
+	printf("Lock flash %d\n", enable);
+	cmd[6] = USBCMD_FLASHLOCK; // flash lock
+	cmd[7] = enable;
+
+	wrap_scsi(h, cmd, sizeof(g_excmd), DIR_IN, 0, 0);
+}
+
+
+int patch_sector(DPFContext *h,
+	ADDR reloc, unsigned long addr, const char *hexfile)
+{
+	int error;
+	unsigned short offset;
+	static
+	unsigned char readbuf[0x10000];
+	unsigned int len = sizeof(readbuf);
+
+	offset = addr & 0xffff;
+	addr -= offset;
+
+	error = flash_read(h, readbuf, addr, 0x10000);
+	if (error < 0) {
+		perror("Reading flash");
+		return error;
+	}
+
+	error = load_ihx(hexfile, &readbuf[offset], &len, reloc);
+	if (error < 0) {
+		fprintf(stderr, "Failed to load HEX file\n");
+		return error;
+	}
+ // Lock DPF handler so nothing can interfere with the flashing (in case
+ // we flash ourselves)
+	dpf_flash_lock(h, 1);
+	error = flash_cmd(h, SPM_WREN, 1, 0);
+	error = flash_cmd(h, SPM_WRSR, 2, 0); // clr status
+
+	error = flash_erase(h, addr);
+	if (error < 0) return error;
+
+	error = flash_write(h, readbuf, addr, 0x10000); // clr status
+	dpf_flash_lock(h, 0);
+
+	return error;
+}
+
+////////////////////////////////////////////////////////////////////////////
+// High level functions, generic
+// These require a hacked command handler with extended command set.
+
+
+static DPFHANDLE g_dpf;
+
+int write_mem(DPFContext *h, const char *hexfile)
+{
+	unsigned int len = 0xc000;
+	int error;
+
+	g_dpf = h;
+	error = load_ihx(hexfile, 0, &len, 0x800);
+	return error;
+}
+
+int read_blk(DPFContext *h, unsigned char *buf, ADDR offset, int len)
+{
+	unsigned char *cmd = g_excmd;
+
+	cmd[6] = USBCMD_MEMREAD; // memory_read
+	cmd[7] = offset;
+	cmd[8] = offset >> 8;
+	cmd[9] = len;
+	cmd[10] = len >> 8;
+
+	return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_IN, buf, len);
+}
+
+#define CHUNK_SIZE 1024
+
+int read_mem(DPFContext *h, unsigned char *buf, ADDR offset, int len)
+{
+	int error = 0;
+	while (len > CHUNK_SIZE && error >= 0) {
+		error = read_blk(h, buf, offset, CHUNK_SIZE);
+		offset += CHUNK_SIZE; len -= CHUNK_SIZE; buf += CHUNK_SIZE;
+	}
+	error = read_blk(h, buf, offset, len);
+	
+	return error;
+}
+
+
+int code_go(DPFContext *h, ADDR start)
+{
+	unsigned char *cmd = g_excmd;
+	printf("Executing applet..\n");
+	cmd[6] = 0x02;   // execute
+	cmd[7] = start;
+	cmd[8] = start >> 8;
+
+	return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_IN, 0, 0);
+}
+
+
+
+////////////////////////////////////////////////////////////////////////////
+// High level functions, DPF specific
+
+/* Bootstrap mode: Expects contiguous memory block to download, then jumps
+ * into start address
+ */
+int dpf_bootstrap(DPFContext *h,
+	ADDR dest, unsigned char *src, unsigned short n, ADDR start)
+{
+	unsigned char *cmd = g_excmd;
+	cmd[6] = USBCMD_APPLOAD;   // Enter bootstrap mode
+	cmd[7] = dest;
+	cmd[8] = dest >> 8;
+	cmd[9] = n;
+	cmd[10] = n >> 8;
+	cmd[11] = start;
+	cmd[12] = start >> 8;
+
+	return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_OUT, src, n);
+}
+
+int dpf_copy(ADDR dst, unsigned char *src, unsigned short n)
+{
+	unsigned char *cmd = g_excmd;
+
+	cmd[6] = 0x01; // memory_write
+	cmd[7] = dst;
+	cmd[8] = dst >> 8;
+	cmd[9] = n;
+	cmd[10] = n >> 8;
+
+	return wrap_scsi(g_dpf, cmd, sizeof(g_excmd), DIR_OUT, src, n);
+}
+
+/*  Currently unused.
+int clr_screen(DPFContext *h, const unsigned char *col)
+{
+	unsigned char *cmd = g_excmd;
+
+	cmd[6] = USBCMD_PROBE;
+	cmd[7] = col[0];
+	cmd[8] = col[1];
+
+	return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_IN, 0, 0);
+}
+*/
+
+/* This function is deprecated and may not be implemented on newer hacks
+ */
+int write_screen(DPFContext *h, const unsigned char *buf, unsigned int len)
+{
+	unsigned char *cmd = g_excmd;
+	unsigned int l;
+	unsigned char factor;
+
+	if (len > 0xffff) {
+		factor = 2; l = len >> 1;
+	} else {
+		factor = 1; l = len;
+	}
+
+	cmd[6] = USBCMD_WRITEFB;
+	cmd[7] = factor;
+	cmd[8] = 0;
+	cmd[9] = l;
+	cmd[10] = l >> 8;
+
+	return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_OUT,
+		(unsigned char*) buf, len);
+}
+
+int dpf_screen_blit(DPFContext *h,
+	const unsigned char *buf, short rect[4])
+{
+	unsigned long len = (rect[2] - rect[0]) * (rect[3] - rect[1]);
+	len <<= 1;
+	unsigned char *cmd = g_excmd;
+
+	cmd[6] = USBCMD_BLIT;
+	cmd[7] = rect[0];
+	cmd[8] = rect[0] >> 8;
+	cmd[9] = rect[1];
+	cmd[10] = rect[1] >> 8;
+	cmd[11] = rect[2] - 1;
+	cmd[12] = (rect[2] - 1) >> 8;
+	cmd[13] = rect[3] - 1;
+	cmd[14] = (rect[3] - 1) >> 8;
+	cmd[15] = 0;
+
+	return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_OUT,
+		(unsigned char*) buf, len);
+}
+
+void dpf_writefb(DPFContext *h, unsigned char *buffer)
+{
+	int len;
+
+	len = h->width * h->height * h->bpp;
+	write_screen(h, buffer, len);
+}
+
+int dpf_setproperty(DPFContext *h, int token, const DPFValue *value)
+{
+	unsigned char *cmd = g_excmd;
+
+	cmd[6] = USBCMD_SETPROPERTY;
+	cmd[7] = token;
+	cmd[8] = token >> 8;
+
+	switch (value->type) {
+		case TYPE_INTEGER:
+			cmd[9] = value->value.integer;
+			cmd[10] = value->value.integer >> 8;
+			break;
+		default:
+			break;
+	}
+
+	return wrap_scsi(h, cmd, sizeof(g_excmd), DIR_OUT, NULL, 0);
+}
+
diff --git a/oncology/dpfhack_display/dpflib/fwload.c b/oncology/dpfhack_display/dpflib/fwload.c
new file mode 100644
index 00000000..72e37f4a
--- /dev/null
+++ b/oncology/dpfhack_display/dpflib/fwload.c
@@ -0,0 +1,140 @@
+/** DPF firmware loader
+ *
+ * 12/2010 <hackfin@section5.ch>
+ *
+ * Based on the FX2 ihx loader
+ *
+ */
+
+#include "dpf.h"
+#include <stdio.h>
+
+////////////////////////////////////////////////////////////////////////////
+
+// Demo stuff:
+
+void memory_dump(unsigned char *buf, unsigned int n)
+{
+	int i = 0;
+	int c = 0;
+
+	while (i < n) {
+		printf("%02x ", buf[i]);
+		c++;
+		if (c == 16) { c = 0; printf("\n"); }
+			i++;
+	}
+	if (c)
+		printf("\n");
+}
+
+int demo0(DPFHANDLE h)
+{
+	static unsigned char image[2 * 128 * 128];
+	int x, y;
+	int i;
+	for (i = 0; i < 127; i++) {
+		unsigned char *b = image;
+		for (y = 0; y < 128; y++) {
+			for (x = 0; x < 128; x++) {
+				*b++ = RGB565_0(x * 2 + i, y * 2 + i, i);
+				*b++ = RGB565_1(x * 2 + i, y * 2 + i, i);
+			}
+		}
+		write_screen(h, image, sizeof(image));
+	}
+	return 0;
+}
+
+
+////////////////////////////////////////////////////////////////////////////
+
+
+#if EXPERIMENTAL
+
+int xmain(int argc, char **argv)
+{
+	int ret;
+	int i;
+	struct banktable *bt;
+
+	// flash offset, offset after jump table
+	unsigned int offset = 0x80000 + 0x200;
+
+
+	static unsigned char buf[0x10000];
+	unsigned int len = sizeof(buf);
+	ret = load_ihx(argv[1], buf, &len, 0x127c, g_banktab);
+	if (ret < 0) {
+		fprintf(stderr, "Failed to load HEX file\n");
+		return ret;
+	} else {
+		printf("Read %d banks\n", ret);
+		for (i = 0; i < ret; i++) {
+			bt = &g_banktab[i];
+			printf("	{ XADDR(0x%04x), XADDR(0x%04x), FOFFS(0x%06x) },\n",
+				bt->reloc, bt->reloc + bt->len, offset + bt->offset);
+
+		}
+	}
+	return 0;
+}
+
+#endif
+
+int main(int argc, char **argv)
+{
+	int ret;
+	DPFHANDLE h;
+
+	int i = 2;
+
+	if (argc < 2 || argc > 3) {
+		fprintf(stderr, "Usage:\n"
+				"%s <generic scsi dev> <.ihx file>\n"
+		        "or in USB mode:\n"
+		        "%s <.ihx file>\n",
+		argv[0], argv[0]);
+		return -1;
+	}
+
+	if (argc == 2) {
+		ret = dpf_open(NULL, &h);
+		i--;
+	} else
+	if (argc == 3) {
+		ret = dpf_open(argv[1], &h);
+	}
+
+	if (ret < 0) {
+		perror("opening DPF device:");
+		return ret;
+	}
+
+// 	This patches a module to init the relocated jump table on a certain
+// 	menu action:
+// 	ret = patch_sector(h, 0x1330, 0x4af7a, "hack2.ihx");
+
+
+// 	patch_sector(h,          0x0,    0x100000, "jumptbl.ihx");
+
+	if (0) {
+		patch_sector(h,          0x0,    0x100000, "jumptbl.ihx");
+		ret = patch_sector(h,       0x1330,    0x110000, "hack.ihx");
+		ret = patch_sector(h, 0x132a,    0x120000, "main.ihx");
+		if (ret < 0) printf("Failed.\n");
+	} else {
+	 // demo0(h);
+
+	}
+	ret = write_mem(h, argv[i]);
+	code_go(h, 0x18a0);
+	if (ret < 0) printf("Failed.\n");
+
+	// unsigned char buf[256];
+	// ret = read_mem(h, buf, 0x18a0, 64);
+	// memory_dump(buf, 64);
+
+	dpf_close(h);
+	return ret;
+}
diff --git a/oncology/dpfhack_display/dpflib/rawusb.c b/oncology/dpfhack_display/dpflib/rawusb.c
new file mode 100644
index 00000000..a3c568b7
--- /dev/null
+++ b/oncology/dpfhack_display/dpflib/rawusb.c
@@ -0,0 +1,177 @@
+/* Low level USB code to access DPF.
+ *
+ * (c) 2010, 2011 <hackfin@section5.ch>
+ *
+ * This currently uses the SCSI command set
+ *
+ * The reason for this is that we want to access the hacked frame
+ * non-root and without having to wait for the SCSI interface to
+ * intialize.
+ *
+ * Later, we'll replace the SCSI command stuff.
+ */
+
+#include "dpf.h"
+#include "sglib.h"
+
+#include <string.h>
+#include <stdio.h>
+
+#define ENDPT_OUT 1
+#define ENDPT_IN 0x81
+
+struct known_device {
+	char *desc;
+	unsigned short vid;
+	unsigned short pid;
+} g_known_devices[] = {
+	{ "AX206 DPF", 0x1908, 0x0102 },
+	{ 0 , 0, 0 } /* NEVER REMOVE THIS */
+};
+
+int handle_error(char *txt)
+{
+	fprintf(stderr, "Error: %s\n", txt);
+	return -1;
+}
+
+void usb_flush(usb_dev_handle *dev)
+{
+	char buf[20];
+	usb_bulk_read(dev, ENDPT_IN, buf, 3, 1000);
+}
+
+int check_known_device(struct usb_device *d)
+{
+	struct known_device *dev = g_known_devices;
+
+	while (dev->desc) {
+		if ((d->descriptor.idVendor == dev->vid) &&
+			(d->descriptor.idProduct == dev->pid)) { 
+				fprintf(stderr, "Found %s\n", dev->desc);
+				return 1;
+		}
+		dev++;
+	}
+	return 0;
+}
+
+static struct usb_device *find_dev(int index)
+{
+	struct usb_bus *b;
+	struct usb_device *d;
+	int enumeration = 0;
+
+	b = usb_get_busses();
+
+	while (b) {
+		d = b->devices;
+		while (d) {
+			if (check_known_device(d)) {
+				if (enumeration == index) return d;
+				else enumeration++;
+			}
+
+#ifdef DEBUG
+			printf("%04x %04x\n",
+				   d->descriptor.idVendor,
+				   d->descriptor.idProduct);
+#endif
+			d = d->next;
+		}
+		b = b->next;
+	}
+	return NULL;
+}
+
+char g_buf[] = {
+	0x55, 0x53, 0x42, 0x43, // dCBWSignature
+	0xde, 0xad, 0xbe, 0xef, // dCBWTag
+	0x00, 0x80, 0x00, 0x00, // dCBWLength
+	0x00, // bmCBWFlags: 0x80: data in (dev to host), 0x00: Data out
+	0x00, // bCBWLUN
+	0x10, // bCBWCBLength
+
+	// SCSI cmd:
+	0xcd, 0x00, 0x00, 0x00,
+	0x00, 0x06, 0x11, 0xf8,
+	0x70, 0x00, 0x40, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+};
+
+int emulate_scsi(usb_dev_handle *dev, unsigned char *cmd, int cmdlen, char out,
+	unsigned char *data, unsigned long block_len)
+{
+	int len;
+	int ret;
+	static unsigned char ansbuf[13]; // Do not change size.
+
+	g_buf[14] = cmdlen;
+	memcpy(&g_buf[15], cmd, cmdlen);
+
+	g_buf[8] = block_len;
+	g_buf[9] = block_len >> 8;
+	g_buf[10] = block_len >> 16;
+	g_buf[11] = block_len >> 24;
+
+	ret = usb_bulk_write(dev, ENDPT_OUT, g_buf, sizeof(g_buf), 1000);
+	if (ret < 0) return ret;
+
+	if (out == DIR_OUT) {
+		if (data) {
+			ret = usb_bulk_write(dev, ENDPT_OUT, (const char* )data,
+					block_len, 3000);
+			if (ret != block_len) {
+				perror("bulk write");
+				return ret;
+			}
+		}
+	} else if (data) {
+		ret = usb_bulk_read(dev, ENDPT_IN, (char *) data, block_len, 4000);
+		if (ret != block_len) {
+			perror("bulk data read");
+		}
+	}
+	// get ACK:
+	len = sizeof(ansbuf);
+	int retry = 0;
+	do {
+		ret = usb_bulk_read(dev, ENDPT_IN, (char *) ansbuf, len, 5000);
+		if (ret != len) {
+			perror("bulk ACK read");
+			ret = DEVERR_TIMEOUT;
+		}
+		retry++;
+	} while (ret == DEVERR_TIMEOUT && retry < 5);
+	if (strncmp((char *) ansbuf, "USBS", 4)) {
+		return handle_error("Got invalid reply\n");
+	}
+	// pass back return code set by peer:
+	return ansbuf[12];
+}
+
+usb_dev_handle *dpf_usb_open(int index)
+{
+	struct usb_device *d;
+	usb_dev_handle *usb_dev;
+
+	usb_init();
+	usb_find_busses();
+	usb_find_devices();
+
+	d = find_dev(index);
+	if (!d) {
+		handle_error("No matching USB device found!");
+		return NULL;
+	}
+
+	usb_dev = usb_open(d);
+	if (usb_dev == NULL) {
+		handle_error("Failed to open usb device!");
+		return NULL;
+	}
+	usb_claim_interface(usb_dev, 0);
+	return usb_dev;
+}
+
+
diff --git a/oncology/dpfhack_display/dpflib/sglib.h b/oncology/dpfhack_display/dpflib/sglib.h
new file mode 100644
index 00000000..a2bc232e
--- /dev/null
+++ b/oncology/dpfhack_display/dpflib/sglib.h
@@ -0,0 +1,19 @@
+#include <stdint.h>
+
+
+/* generic device wrapper: */
+
+const char* dev_errstr(int error);
+
+
+/* generic SCSI device stuff: */
+
+#define DIR_IN  0
+#define DIR_OUT 1
+
+
+/* Special functions */
+
+
+
+