From cd6374e641420ade3603f0fd23fe9afac5c443bc Mon Sep 17 00:00:00 2001 From: tv Date: Wed, 8 Apr 2015 01:07:01 +0200 Subject: I Like To Move It --- modules/exim-cd.nix | 474 ---------------------------------------------------- 1 file changed, 474 deletions(-) delete mode 100644 modules/exim-cd.nix (limited to 'modules/exim-cd.nix') diff --git a/modules/exim-cd.nix b/modules/exim-cd.nix deleted file mode 100644 index a4c47b399..000000000 --- a/modules/exim-cd.nix +++ /dev/null @@ -1,474 +0,0 @@ -{ config, pkgs, ... }: - -let - inherit (builtins) toFile; - inherit (pkgs.lib.attrsets) mapAttrs; - inherit (pkgs.lib.strings) concatMapStringsSep; -in - -{ - services.exim = - let - retiolumHostname = "${config.networking.hostName}.retiolum"; - - internet-aliases = [ - { from = "tomislav@viljetic.de"; to = "tv@wu.retiolum"; } - - # (mindestens) lisp-stammtisch und elli haben die: - { from = "tv@viljetic.de"; to = "tv@wu.retiolum"; } - - { from = "tv@destroy.dyn.shackspace.de"; to = "tv@wu.retiolum"; } - - { from = "mirko@viljetic.de"; to = "mv@cd.retiolum"; } - - # TODO killme (wo wird die benutzt?) - { from = "tv@cd.retiolum"; to = "tv@wu.retiolum"; } - - { from = "postmaster@krebsco.de"; to = "tv@wu.retiolum"; } - ]; - - system-aliases = [ - { from = "mailer-daemon"; to = "postmaster"; } - { from = "postmaster"; to = "root"; } - { from = "nobody"; to = "root"; } - { from = "hostmaster"; to = "root"; } - { from = "usenet"; to = "root"; } - { from = "news"; to = "root"; } - { from = "webmaster"; to = "root"; } - { from = "www"; to = "root"; } - { from = "ftp"; to = "root"; } - { from = "abuse"; to = "root"; } - { from = "noc"; to = "root"; } - { from = "security"; to = "root"; } - { from = "root"; to = "tv"; } - { from = "mirko"; to = "mv"; } - ]; - - to-lsearch = concatMapStringsSep "\n" ({ from, to }: "${from}: ${to}"); - lsearch = - mapAttrs (name: set: toFile name (to-lsearch set)) { - inherit internet-aliases; - inherit system-aliases; - }; - in - { - enable = true; - config = - '' - primary_hostname = ${retiolumHostname} - - # HOST_REDIR contains the real destinations for "local_domains". - #HOST_REDIR = /etc/exim4/host_redirect - - - # Domains not listed in local_domains need to be deliverable remotely. - # XXX We abuse local_domains to mean "domains, we're the gateway for". - domainlist local_domains = @ : localhost - #: viljetic.de : SHACK_REDIR_HOSTNAME - domainlist relay_to_domains = - hostlist relay_from_hosts = <; 127.0.0.1 ; ::1 ; 10.243.13.37 - - acl_smtp_rcpt = acl_check_rcpt - acl_smtp_data = acl_check_data - - # av_scanner = clamd:/tmp/clamd - # spamd_address = 127.0.0.1 783 - - # tls_advertise_hosts = * - # tls_certificate = /etc/ssl/exim.crt - # tls_privatekey = /etc/ssl/exim.pem - # (debian) tls_verify_certificates (to check client certs) - - # daemon_smtp_ports = 25 : 465 : 587 - # tls_on_connect_ports = 465 - - # qualify_domain defaults to primary_hostname - # qualify_recipient defaults to qualify_domain - - # allow_domain_literals - - never_users = root - - host_lookup = * - - # ident callbacks for all incoming SMTP calls - rfc1413_hosts = * - rfc1413_query_timeout = 5s - - # sender_unqualified_hosts = - # recipient_unqualified_hosts = - - # percent_hack_domains = - - # arch & debian - #ignore_bounce_errors_after = 2d - #timeout_frozen_after = 7d - # debian - #smtp_banner = $smtp_active_hostname ESMTP Exim $version_number $tod_full - #freeze_tell = postmaster - #trusted_users = uucp - # arch - #split_spool_directory = true - - log_selector = -queue_run +address_rewrite +all_parents +queue_time - log_file_path = syslog - syslog_timestamp = false - syslog_duplication = false - - begin acl - - acl_check_rcpt: - # Accept if the source is local SMTP (i.e. not over TCP/IP). - # We do this by testing for an empty sending host field. - accept hosts = : - # arch & debian: - control = dkim_disable_verify - - deny message = Restricted characters in address - domains = +local_domains - local_parts = ^[.] : ^.*[@%!/|] - - deny message = Restricted characters in address - domains = !+local_domains - local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./ - - accept local_parts = postmaster - domains = +local_domains - - ## feature RETIOLUM_MAIL - #accept - # hosts = *.retiolum - # domains = *.retiolum - # control = dkim_disable_verify - - #require verify = sender - - accept hosts = +relay_from_hosts - control = submission - # debian: control = submission/sender_retain - # arch & debian: - control = dkim_disable_verify - - accept authenticated = * - control = submission - control = dkim_disable_verify - - accept message = relay not permitted 2 - recipients = lsearch;${lsearch.internet-aliases} - - require message = relay not permitted - domains = +local_domains : +relay_to_domains - - require - message = unknown user - verify = recipient/callout - - # deny message = rejected because $sender_host_address is in a black list at $dnslist_domain\n$dnslist_text - # dnslists = black.list.example - # - # warn dnslists = black.list.example - # add_header = X-Warning: $sender_host_address is in a black list at $dnslist_domain - # log_message = found in $dnslist_domain - - # Client SMTP Authorization (csa) checks on the sending host. - # Such checks do DNS lookups for special SRV records. - # require verify = csa - - accept - - - acl_check_data: - # see av_scanner - #deny malware = * - # message = This message contains a virus ($malware_name). - - # Add headers to a message if it is judged to be spam. Before enabling this, - # you must install SpamAssassin. You may also need to set the spamd_address - # option above. - # - # warn spam = nobody - # add_header = X-Spam_score: $spam_score\n\ - # X-Spam_score_int: $spam_score_int\n\ - # X-Spam_bar: $spam_bar\n\ - # X-Spam_report: $spam_report - - # feature HELO_REWRITE - # XXX note that the public ip (162.219.5.183) resolves to viljetic.de - warn - sender_domains = viljetic.de : shackspace.de - set acl_m_special_dom = $sender_address_domain - - accept - - - begin routers - - # feature RETIOLUM_MAIL - retiolum: - debug_print = "R: retiolum for $local_part@$domain" - driver = manualroute - domains = ! ${retiolumHostname} : *.retiolum - transport = retiolum_smtp - route_list = ^.* $0 byname - no_more - - internet_aliases: - debug_print = "R: internet_aliases for $local_part@$domain" - driver = redirect - data = ''${lookup{$local_part@$domain}lsearch{${lsearch.internet-aliases}}} - - dnslookup: - debug_print = "R: dnslookup for $local_part@$domain" - driver = dnslookup - domains = ! +local_domains - transport = remote_smtp - ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 - # if ipv6-enabled then instead use: - # ignore_target_hosts = <; 0.0.0.0 ; 127.0.0.0/8 ; ::1 - - # (debian) same_domain_copy_routing = yes - # (debian) ignore private rfc1918 and APIPA addresses - # (debian) ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 : 192.168.0.0/16 :\ - # 172.16.0.0/12 : 10.0.0.0/8 : 169.254.0.0/16 :\ - # 255.255.255.255 - - # Fail and bounce if the router does not find the domain in the DNS. - # I.e. no more routers are tried. - # There are a few cases where a dnslookup router will decline to accept an - # address; if such a router is expected to handle "all remaining non-local - # domains", then it is important to set no_more. - no_more - - # XXX this is only used because these "well known aliases" goto tv@cd.retiolum - # TODO bounce everything, there is no @cd.retiolum - system_aliases: - debug_print = "R: system_aliases for $local_part@$domain" - driver = redirect - data = ''${lookup{$local_part}lsearch{${lsearch.system-aliases}}} - - # TODO this is only b/c mv here... send mv's mails somewhere else... - local_user: - debug_print = "R: local_user for $local_part@$domain" - driver = accept - check_local_user - # local_part_suffix = +* : -* - # local_part_suffix_optional - transport = home_maildir - cannot_route_message = Unknown user - - begin transports - - retiolum_smtp: - driver = smtp - retry_include_ip_address = false - # serialize_hosts = TODO-all-slow-hosts - - remote_smtp: - driver = smtp - # debian has also stuff for tls, headers_rewrite and more here - - # feature HELO_REWRITE - # XXX note that the public ip (162.219.5.183) resolves to viljetic.de - helo_data = ''${if eq{$acl_m_special_dom}{} \ - {$primary_hostname} \ - {$acl_m_special_dom} } - - home_maildir: - driver = appendfile - maildir_format - maildir_use_size_file - directory = $home/Mail - directory_mode = 0700 - delivery_date_add - envelope_to_add - return_path_add - - begin retry - *.retiolum * F,42d,1m - * * F,2h,15m; G,16h,1h,1.5; F,4d,6h - - begin rewrite - begin authenticators - ''; - - - # group = mail - # mode = 0660 - - - #address_pipe: - # driver = pipe - # return_output - # - #address_file: - # driver = appendfile - # delivery_date_add - # envelope_to_add - # return_path_add - # - #address_reply: - # driver = autoreply - - - #maildrop_pipe: - # debug_print = "T: maildrop_pipe for $local_part@$domain" - # driver = pipe - # path = "/bin:/usr/bin:/usr/local/bin" - # command = "/usr/bin/maildrop" - # return_path_add - # delivery_date_add - # envelope_to_add - - - - - - ##begin retry - # Address or Domain Error Retries - - # Our host_redirect destinations might be offline a lot. - # TODO define fallback destinations(?) - #lsearch;${lsearch.internet-aliases} * F,42d,1m - - - ## begin rewrite - - # just in case (shackspace.de should already do this) - #tv@shackspace.de tv@SHACK_REDIR_HOSTNAME T - - - ## begin authenticators - #PLAIN: - # driver = plaintext - # server_set_id = $auth2 - # server_prompts = : - # server_condition = Authentication is not yet configured - # server_advertise_condition = ''${if def:tls_in_cipher } - - #LOGIN: - # driver = plaintext - # server_set_id = $auth1 - # server_prompts = <| Username: | Password: - # server_condition = Authentication is not yet configured - # server_advertise_condition = ''${if def:tls_in_cipher } - - - - }; - -} - -# config = '' -# primary_hostname = ${retiolumHostname} -# domainlist local_domains = @ : localhost -# domainlist relay_to_domains = *.retiolum -# hostlist relay_from_hosts = <; 127.0.0.1 ; ::1 -# -# acl_smtp_rcpt = acl_check_rcpt -# acl_smtp_data = acl_check_data -# -# host_lookup = * -# rfc1413_hosts = * -# rfc1413_query_timeout = 5s -# -# log_file_path = syslog -# syslog_timestamp = false -# syslog_duplication = false -# -# begin acl -# -# acl_check_rcpt: -# accept hosts = : -# control = dkim_disable_verify -# -# deny message = Restricted characters in address -# domains = +local_domains -# local_parts = ^[.] : ^.*[@%!/|] -# -# deny message = Restricted characters in address -# domains = !+local_domains -# local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./ -# -# accept local_parts = postmaster -# domains = +local_domains -# -# #accept -# # hosts = *.retiolum -# # domains = *.retiolum -# # control = dkim_disable_verify -# -# #require verify = sender -# -# accept hosts = +relay_from_hosts -# control = submission -# control = dkim_disable_verify -# -# accept authenticated = * -# control = submission -# control = dkim_disable_verify -# -# require message = relay not permitted -# domains = +local_domains : +relay_to_domains -# -# require verify = recipient -# -# accept -# -# -# acl_check_data: -# accept -# -# -# begin routers -# -# retiolum: -# driver = manualroute -# domains = ! ${retiolumHostname} : *.retiolum -# transport = remote_smtp -# route_list = ^.* $0 byname -# no_more -# -# nonlocal: -# debug_print = "R: nonlocal for $local_part@$domain" -# driver = redirect -# domains = ! +local_domains -# allow_fail -# data = :fail: Mailing to remote domains not supported -# no_more -# -# local_user: -# # debug_print = "R: local_user for $local_part@$domain" -# driver = accept -# check_local_user -# # local_part_suffix = +* : -* -# # local_part_suffix_optional -# transport = home_maildir -# cannot_route_message = Unknown user -# -# -# begin transports -# -# remote_smtp: -# driver = smtp -# -# home_maildir: -# driver = appendfile -# maildir_format -# directory = $home/Maildir -# directory_mode = 0700 -# delivery_date_add -# envelope_to_add -# return_path_add -# # group = mail -# # mode = 0660 -# -# begin retry -# *.retiolum * F,42d,1m -# * * F,2h,15m; G,16h,1h,1.5; F,4d,6h -# -# begin rewrite -# -# begin authenticators -# ''; -# }; -#} -- cgit v1.2.3