blob: 395a540709176b99fc4d8c90e27c263a2f12c5e4 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
|
# xd002
2% Custom mechanical keyboard. ATtiny85 powered, with 2*WS2812 LEDs, and the micronucleus bootloader.
**Note**: Due to limited firmware space, a _**lot**_ of features have to be disabled to get a functioning QMK based keyboard.
* Keyboard Maintainer: [zvecr](https://github.com/zvecr)
* Hardware Supported: xd002
* Hardware Availability: [kprepublic](https://kprepublic.com/products/xd002-xiudi-2-custom-mechanical-keyboard-2-keys-underglow-and-switch-rgb-pcb-programmed-hot-swappable-macro-key-aluminum-case)
Make example for this keyboard (after setting up your build environment):
make xiudi/xd002:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Flashing
### Prerequisites
```bash
git clone https://github.com/micronucleus/micronucleus.git
cd micronucleus/commandline/
sudo make install
```
On Linux, you’ll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place [these files](https://github.com/micronucleus/micronucleus/blob/master/commandline/49-micronucleus.rules) in /etc/udev/rules.d/. Once added run the following:
```bash
sudo udevadm control --reload-rules
sudo udevadm trigger
```
### Instructions
**Reset Key**: Hold down key nearest to the USB socket while plugging in the keyboard.
```bash
make xiudi/xd002:default:flash
# or directly with...
micronucleus --run <firmware.hex>
```
### Recovery
* [Original Firmware](https://github.com/xiudi/Attiny85_vusb_pad_test)
* [Bootloader Repair](https://digistump.com/wiki/digispark/tutorials/proisp)
|
