1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
|
/*
* LEDDriver.c
*
* Created on: Aug 26, 2013
* Author: Omri Iluz
*/
#include "ws2812.h"
#include "stdlib.h"
#define BYTES_FOR_LED_BYTE 4
#define NB_COLORS 3
#define BYTES_FOR_LED BYTES_FOR_LED_BYTE*NB_COLORS
#define DATA_SIZE BYTES_FOR_LED*NB_LEDS
#define RESET_SIZE 200
#define PREAMBLE_SIZE 4
// Define the spi your LEDs are plugged to here
#define WS2812_SPI SPID2
// Define the number of LEDs you wish to control in your LED strip
#define NB_LEDS RGBLED_NUM
#define LED_SPIRAL 1
static uint8_t txbuf[PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE];
static uint8_t get_protocol_eq(uint8_t data, int pos);
/*
* This lib is meant to be used asynchronously, thus the colors contained in
* the txbuf will be sent in loop, so that the colors are always the ones you
* put in the table (the user thus have less to worry about)
*
* Since the data are sent via DMA, and the call to spiSend is a blocking one,
* the processor ressources are not used to much, if you see your program being
* too slow, simply add a:
* chThdSleepMilliseconds(x);
* after the spiSend, where you increment x untill you are satisfied with your
* program speed, another trick may be to lower this thread priority : your call
*/
static THD_WORKING_AREA(LEDS_THREAD_WA, 128);
static THD_FUNCTION(ledsThread, arg) {
(void) arg;
while(1){
spiSend(&WS2812_SPI, PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE, txbuf);
}
}
static const SPIConfig spicfg = {
NULL,
PORT_WS2812,
PIN_WS2812,
SPI_CR1_BR_1|SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us (2.25 MHz)
};
/*
* Function used to initialize the driver.
*
* Starts by shutting off all the LEDs.
* Then gets access on the LED_SPI driver.
* May eventually launch an animation on the LEDs (e.g. a thread setting the
* txbuff values)
*/
void leds_init(void){
/* MOSI pin*/
palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
for(int i = 0; i < RESET_SIZE; i++)
txbuf[DATA_SIZE+i] = 0x00;
for (int i=0; i<PREAMBLE_SIZE; i++)
txbuf[i] = 0x00;
spiAcquireBus(&WS2812_SPI); /* Acquire ownership of the bus. */
spiStart(&WS2812_SPI, &spicfg); /* Setup transfer parameters. */
spiSelect(&WS2812_SPI); /* Slave Select assertion. */
chThdCreateStatic(LEDS_THREAD_WA, sizeof(LEDS_THREAD_WA),NORMALPRIO, ledsThread, NULL);
}
/*
* As the trick here is to use the SPI to send a huge pattern of 0 and 1 to
* the ws2812b protocol, we use this helper function to translate bytes into
* 0s and 1s for the LED (with the appropriate timing).
*/
static uint8_t get_protocol_eq(uint8_t data, int pos){
uint8_t eq = 0;
if (data & (1 << (2*(3-pos))))
eq = 0b1110;
else
eq = 0b1000;
if (data & (2 << (2*(3-pos))))
eq += 0b11100000;
else
eq += 0b10000000;
return eq;
}
void WS2812_init(void) {
leds_init();
}
void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) {
uint8_t i = 0;
while (i < number_of_leds) {
set_led_color_rgb(ledarray[i], i);
i++;
}
}
/*
* If you want to set a LED's color in the RGB color space, simply call this
* function with a hsv_color containing the desired color and the index of the
* led on the LED strip (starting from 0, the first one being the closest the
* first plugged to the board)
*
* Only set the color of the LEDs through the functions given by this API
* (unless you really know what you are doing)
*/
void set_led_color_rgb(LED_TYPE color, int pos){
for(int j = 0; j < 4; j++)
txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + j] = get_protocol_eq(color.g, j);
for(int j = 0; j < 4; j++)
txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE+j] = get_protocol_eq(color.r, j);
for(int j = 0; j < 4; j++)
txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE*2+j] = get_protocol_eq(color.b, j);
}
void set_leds_color_rgb(LED_TYPE color){
for(int i = 0; i < NB_LEDS; i++)
set_led_color_rgb(color, i);
}
void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds) {
}
|
