blob: 0ef2fede470bdcb0ee1bf1997cb51f823ebd6ae1 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
|
# ANAVI Macro Pad 8
ANAVI Macro Pad 2 is an open source mini mechanical keyboard with 2 keys and backlit. Powered by ATtiny 85 microcontroller and with microUSB connector. Designed with KiCad.
* Keyboard Maintainer: [Leon Anavi](https://github.com/leon-anavi)
* Hardware Supported: ANAVI Macro Pad 2
* Hardware Availability: [PCB Files](https://github.com/AnaviTechnology/anavi-macro-pad-2)
**Note**: Due to limited firmware space, a _**lot**_ of features have to be disabled to get a functioning QMK based keyboard.
Make example for this keyboard (after setting up your build environment):
make anavi/macropad2:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Flashing
### Prerequisites
```bash
git clone https://github.com/micronucleus/micronucleus.git
cd micronucleus/commandline/
sudo make install
```
On GNU/Linux distributions, you will need proper privileges to access the MCU. You can either use `sudo` when flashing firmware, or place [these files](https://github.com/micronucleus/micronucleus/blob/master/commandline/49-micronucleus.rules) in /etc/udev/rules.d/. Once added run the following:
```bash
sudo udevadm control --reload-rules
sudo udevadm trigger
```
### Instructions
* Run one of the following commands:
```bash
make anavi/macropad2:default:flash
# or directly with...
micronucleus --run <firmware.hex>
```
* Plug ANAVI Macro Pad 2 to the USB port and the flashing procedure should start
### Recovery
* [Original Firmware](https://github.com/AnaviTechnology/anavi-macro-pad-2/tree/main/bootloader)
* [Bootloader Repair](https://digistump.com/wiki/digispark/tutorials/proisp)
|
