blob: 27696ca01ab5f99d28faea9c16d6b07654b4b77e (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
|
/* Library made by: g4lvanix
* Github repository: https://github.com/g4lvanix/I2C-slave-lib
*/
#include <avr/io.h>
#include <util/twi.h>
#include <avr/interrupt.h>
#include <stdbool.h>
#include "i2c_slave.h"
void i2c_init(uint8_t address){
// load address into TWI address register
TWAR = (address << 1);
// set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN);
}
void i2c_stop(void){
// clear acknowledge and enable bits
TWCR &= ~((1 << TWEA) | (1 << TWEN));
}
ISR(TWI_vect){
uint8_t ack = 1;
// temporary stores the received data
//uint8_t data;
switch(TW_STATUS){
case TW_SR_SLA_ACK:
// The device is now a slave receiver
slave_has_register_set = false;
break;
case TW_SR_DATA_ACK:
// This device is a slave receiver and has received data
// First byte is the location then the bytes will be writen in buffer with auto-incriment
if(!slave_has_register_set){
buffer_address = TWDR;
if (buffer_address >= RX_BUFFER_SIZE){ // address out of bounds dont ack
ack = 0;
buffer_address = 0;
}
slave_has_register_set = true; // address has been receaved now fill in buffer
} else {
rxbuffer[buffer_address] = TWDR;
buffer_address++;
}
break;
case TW_ST_SLA_ACK:
case TW_ST_DATA_ACK:
// This device is a slave transmitter and master has requested data
TWDR = txbuffer[buffer_address];
buffer_address++;
break;
case TW_BUS_ERROR:
// We got an error, reset i2c
TWCR = 0;
default:
break;
}
// Reset i2c state mahcine to be ready for next interrupt
TWCR |= (1 << TWIE) | (1 << TWINT) | (ack << TWEA) | (1 << TWEN);
}
|
