#ifndef REV2_H #define REV2_H #include "nyquist.h" //void promicro_bootloader_jmp(bool program); #include "quantum.h" #ifdef USE_I2C #include <stddef.h> #ifdef __AVR__ #include <avr/io.h> #include <avr/interrupt.h> #endif #endif //void promicro_bootloader_jmp(bool program); #ifndef FLIP_HALF // Standard Keymap // (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left) #define LAYOUT( \ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \ ) \ { \ { L00, L01, L02, L03, L04, L05 }, \ { L10, L11, L12, L13, L14, L15 }, \ { L20, L21, L22, L23, L24, L25 }, \ { L30, L31, L32, L33, L34, L35 }, \ { L40, L41, L42, L43, L44, L45 }, \ { R05, R04, R03, R02, R01, R00 }, \ { R15, R14, R13, R12, R11, R10 }, \ { R25, R24, R23, R22, R21, R20 }, \ { R35, R34, R33, R32, R31, R30 }, \ { R45, R44, R43, R42, R41, R40 } \ } #else // Keymap with right side flipped // (TRRS jack on both halves are to the right) #define LAYOUT( \ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \ ) \ { \ { L00, L01, L02, L03, L04, L05 }, \ { L10, L11, L12, L13, L14, L15 }, \ { L20, L21, L22, L23, L24, L25 }, \ { L30, L31, L32, L33, L34, L35 }, \ { L40, L41, L42, L43, L44, L45 }, \ { R00, R01, R02, R03, R04, R05 }, \ { R10, R11, R12, R13, R14, R15 }, \ { R20, R21, R22, R23, R24, R25 }, \ { R30, R31, R32, R33, R34, R35 }, \ { R40, R41, R42, R43, R44, R45 } \ } #endif #define LAYOUT_ortho_5x12 LAYOUT #endif