/* Copyright 2015 Jun Wako <wakojun@gmail.com> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0x04D8 #define PRODUCT_ID 0xEED2 #define DEVICE_VER 0x0101 #define MANUFACTURER "Massdrop Inc." #define PRODUCT "CTRL Keyboard" #define SERIAL_NUM "Unavailable" /* key matrix size */ #define MATRIX_ROWS 11 #define MATRIX_COLS 8 /* MCU Port name definitions */ #define PA 0 #define PB 1 /* Port and Pin definition of key row hardware configuration */ #define MATRIX_ROW_PORTS PB, PB, PB, PB, PB, PB, PA, PA, PB, PB, PB #define MATRIX_ROW_PINS 4, 5, 6, 7, 8, 9, 10, 11, 10, 11, 12 /* Port and Pin definition of key column hardware configuration */ #define MATRIX_COL_PORTS PA, PA, PA, PA, PA, PA, PA, PA #define MATRIX_COL_PINS 0, 1, 2, 3, 4, 5, 6, 7 /* This Shift Register expands available hardware output lines to control additional peripherals */ /* It uses four lines from the MCU to provide 16 output lines */ /* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */ #define SR_EXP_RCLK_PORT PB #define SR_EXP_RCLK_PIN 14 /* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */ #define SR_EXP_OE_N_PORT PB #define SR_EXP_OE_N_PIN 15 /* SERCOM port to use for Shift Register SPI */ /* DATAOUT and SCLK must be configured to use hardware pins of this port */ #define SR_EXP_SERCOM SERCOM2 /* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */ #define SR_EXP_DATAOUT_PORT PA #define SR_EXP_DATAOUT_PIN 12 #define SR_EXP_DATAOUT_MUX 2 /* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */ #define SR_EXP_SCLK_PORT PA #define SR_EXP_SCLK_PIN 13 #define SR_EXP_SCLK_MUX 2 /* Debug LED (Small LED Located near MCU) */ #define DEBUG_LED_ENABLE 1 #define DEBUG_LED_PORT PA #define DEBUG_LED_PIN 27 /* Additional debugging ports */ /* PCB M21 */ #define DEBUG_PORT1_ENABLE 1 #define DEBUG_PORT1_PORT PB #define DEBUG_PORT1_PIN 3 /* PCB M23 */ #define DEBUG_PORT2_ENABLE 1 #define DEBUG_PORT2_PORT PB #define DEBUG_PORT2_PIN 17 /* PCB M25 */ #define DEBUG_PORT3_ENABLE 1 #define DEBUG_PORT3_PORT PA #define DEBUG_PORT3_PIN 20 /* Debug Boot Tracing - During boot sequence, ground this pin to halt and display debug code using Debug LED */ /* This is useful in determining which hardware device may have malfunctioned or is improperly configured */ /* Feature is automatically disabled after successful boot */ /* PCB M27 */ #define DEBUG_BOOT_TRACING_ENABLE 1 #define DEBUG_BOOT_TRACING_PORT PB #define DEBUG_BOOT_TRACING_PIN 23 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ //#define LOCKING_RESYNC_ENABLE /* Force boot in NKRO mode */ //#define FORCE_NKRO /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_LED_PROCESS_LIMIT 15 #define RGB_MATRIX_LED_FLUSH_LIMIT 10 #include "config_led.h"