/* Copyright 2021 KapCave This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0x4B43 #define PRODUCT_ID 0x5036 #define DEVICE_VER 0x0001 #define MANUFACTURER KapCave #define PRODUCT paladin64 /* key matrix size */ #define MATRIX_ROWS 8 #define MATRIX_COLS 8 #define BOOTMAGIC_LITE_ROW 3 #define BOOTMAGIC_LITE_COLUMN 6 /* Only required if you add in a trackpoint hardware to the pcb */ #ifdef PS2_USE_USART #define PS2_CLOCK_PIN D5 #define PS2_DATA_PIN D2 /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling * edge */ /* set DDR of CLOCK as input to be slave */ #define PS2_USART_INIT() do { \ PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ UCSR1C = ((1 << UMSEL10) | \ (3 << UPM10) | \ (0 << USBS1) | \ (3 << UCSZ10) | \ (0 << UCPOL1)); \ UCSR1A = 0; \ UBRR1H = 0; \ UBRR1L = 0; \ } while (0) #define PS2_USART_RX_INT_ON() do { \ UCSR1B = ((1 << RXCIE1) | \ (1 << RXEN1)); \ } while (0) #define PS2_USART_RX_POLL_ON() do { \ UCSR1B = (1 << RXEN1); \ } while (0) #define PS2_USART_OFF() do { \ UCSR1C = 0; \ UCSR1B &= ~((1 << RXEN1) | \ (1 << TXEN1)); \ } while (0) #define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) #define PS2_USART_RX_DATA UDR1 #define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) #define PS2_USART_RX_VECT USART1_RX_vect #endif #ifdef PS2_USE_INT #define PS2_CLOCK_PIN D2 #define PS2_DATA_PIN D5 #define PS2_INT_INIT() do { \ EICRA |= ((1<<ISC21) | \ (0<<ISC20)); \ } while (0) #define PS2_INT_ON() do { \ EIMSK |= (1<<INT2); \ } while (0) #define PS2_INT_OFF() do { \ EIMSK &= ~(1<<INT2); \ } while (0) #define PS2_INT_VECT INT2_vect #endif /* key matrix pins */ #define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, D6, B0, D3 } #define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, D1 } #define UNUSED_PINS /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW /* number of backlight levels */ #ifdef BACKLIGHT_PIN #define BACKLIGHT_LEVELS 3 #endif /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE #define RGB_DI_PIN D0 #ifdef RGB_DI_PIN #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 14 #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 #define RGBLIGHT_VAL_STEP 12 #endif