/* Copyright 2015 Jun Wako <wakojun@gmail.com> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #define MOUSEKEY_INTERVAL 20 #define MOUSEKEY_DELAY 0 #define MOUSEKEY_TIME_TO_MAX 60 #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 #define TAPPING_TOGGLE 1 /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST #define TAPPING_TERM 200 #define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.) /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* key combination for command */ #define IS_COMMAND() ( \ get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \ get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \ ) /* key matrix size */ #define MATRIX_ROWS 18 #define MATRIX_COLS 5 // For some reason, the rows are colums in the schematic, and vice versa #define MATRIX_ROW_PINS { B2, B3, B18, B19, C0, C9, C10, C11, D0 } #define MATRIX_COL_PINS { D1, D4, D5, D6, D7 } #define UNUSED_PINS /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION ROW2COL /* Serial config (for communication between halves) */ #define SERIAL_USART_DRIVER SD1 // Only true for the master half #define SERIAL_USART_CONFIG { (SERIAL_USART_SPEED), } // Only field is speed #define SERIAL_USART_FULL_DUPLEX /* number of backlight levels */ #define BACKLIGHT_LEVELS 3 #define LED_BRIGHTNESS_LO 100 #define LED_BRIGHTNESS_HI 255 /* LED matrix driver */ #define LED_DRIVER_ADDR_1 0x74 #define LED_DRIVER_COUNT 1 #define DRIVER_LED_TOTAL 76 #define LED_MATRIX_SPLIT { 38, 38 } #define LED_DISABLE_WHEN_USB_SUSPENDED // LED Matrix Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_led_matrix?id=led-matrix-effects #define ENABLE_LED_MATRIX_ALPHAS_MODS #define ENABLE_LED_MATRIX_BREATHING #define ENABLE_LED_MATRIX_BAND #define ENABLE_LED_MATRIX_BAND_PINWHEEL #define ENABLE_LED_MATRIX_BAND_SPIRAL #define ENABLE_LED_MATRIX_CYCLE_LEFT_RIGHT #define ENABLE_LED_MATRIX_CYCLE_UP_DOWN #define ENABLE_LED_MATRIX_CYCLE_OUT_IN #define ENABLE_LED_MATRIX_DUAL_BEACON #if defined(LED_MATRIX_KEYREACTIVE_ENABLED) # define ENABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE # define ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE # define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE # define ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS # define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS # define ENABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS # define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS # define ENABLE_LED_MATRIX_SPLASH # define ENABLE_LED_MATRIX_MULTISPLASH #endif #define ENABLE_LED_MATRIX_WAVE_LEFT_RIGHT #define ENABLE_LED_MATRIX_WAVE_UP_DOWN /* i2c (for LED matrix) */ #define I2C1_CLOCK_SPEED 400000 #define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2 #define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2 #define I2C1_SCL_PIN B0 #define I2C1_SDA_PIN B1 #ifdef ST7565_ENABLE /* LCD driver */ # define ST7565_A0_PIN C7 # define ST7565_RST_PIN C8 # define ST7565_SS_PIN C4 # define ST7565_SPI_CLK_DIVISOR 2 # define ST7565_CONTRAST 22 # define ST7565_DISPLAY_WIDTH 128 # define ST7565_DISPLAY_HEIGHT 32 /* SPI (for LCD) */ # define SPI_DRIVER SPID1 # define SPI_SCK_PIN C5 # define SPI_SCK_PAL_MODE PAL_MODE_ALTERNATIVE_2 # define SPI_MOSI_PIN C6 # define SPI_MOSI_PAL_MODE PAL_MODE_ALTERNATIVE_2 # define SPI_MISO_PIN A4 // Just an unused pin, the "normal" MISO pin (C7) is used for other things # define SPI_MISO_PAL_MODE PAL_MODE_ALTERNATIVE_7 // Default for A4 #endif /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT