/* Copyright 2018 Yiancar * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "v1.h" // Please ignore this is for upcoming features /*#ifdef RAW_ENABLE void raw_hid_receive( uint8_t *data, uint8_t length ) { uint8_t command = data[0]; switch ( command ) { case id_protocol_version: { msg_protocol_version *msg = (msg_protocol_version*)&data[1]; msg->version = PROTOCOL_VERSION; break; } #if USE_KEYMAPS_IN_EEPROM case id_keymap_keycode_load: { msg_keymap_keycode_load *msg = (msg_keymap_keycode_load*)&data[1]; msg->keycode = keymap_keycode_load( msg->layer, msg->row, msg->column ); break; } case id_keymap_keycode_save: { msg_keymap_keycode_save *msg = (msg_keymap_keycode_save*)&data[1]; keymap_keycode_save( msg->layer, msg->row, msg->column, msg->keycode); break; } case id_keymap_default_save: { keymap_default_save(); break; } #endif // USE_KEYMAPS_IN_EEPROM case id_backlight_config_set_values: { msg_backlight_config_set_values *msg = (msg_backlight_config_set_values*)&data[1]; backlight_config_set_values(msg); backlight_config_save(); break; } case id_backlight_config_set_alphas_mods: { msg_backlight_config_set_alphas_mods *msg = (msg_backlight_config_set_alphas_mods*)&data[1]; backlight_config_set_alphas_mods( msg->alphas_mods ); backlight_config_save(); break; } case id_backlight_set_key_color: { msg_backlight_set_key_color *msg = (msg_backlight_set_key_color*)&data[1]; backlight_set_key_color(msg->row, msg->column, msg->hsv); break; } case id_system_get_state: { msg_system_state *msg = (msg_system_state*)&data[1]; msg->value = backlight_get_tick(); break; } default: { // Unhandled message. data[0] = id_unhandled; break; } } // Return same buffer with values changed raw_hid_send( data, length ); } #endif*/ #ifdef HS60_ANSI const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location * | | G location * | | | B location * | | | | */ {0, C1_1, C3_2, C4_2}, //A1 {0, C1_2, C2_2, C4_3}, //A2 {0, C1_3, C2_3, C3_3}, //A3 {0, C1_4, C2_4, C3_4}, //A4 {0, C1_5, C2_5, C3_5}, //A5 {0, C1_6, C2_6, C3_6}, //A6 {0, C1_7, C2_7, C3_7}, //A7 {0, C1_8, C2_8, C3_8}, //A8 {0, C9_1, C8_1, C7_1}, //A9 {0, C9_2, C8_2, C7_2}, //A10 {0, C9_3, C8_3, C7_3}, //A11 {0, C9_4, C8_4, C7_4}, //A12 {0, C9_5, C8_5, C7_5}, //A13 {0, C9_6, C8_6, C7_6}, //A14 {0, C9_7, C8_7, C6_6}, //A15 {0, C9_8, C7_7, C6_7}, //A16 {0, C1_9, C3_10, C4_10}, //B1 {0, C1_10, C2_10, C4_11}, //B2 {0, C1_11, C2_11, C3_11}, //B3 {0, C1_12, C2_12, C3_12}, //B4 {0, C1_13, C2_13, C3_13}, //B5 {0, C1_14, C2_14, C3_14}, //B6 {0, C1_15, C2_15, C3_15}, //B7 {0, C1_16, C2_16, C3_16}, //B8 {0, C9_9, C8_9, C7_9}, //B9 {0, C9_10, C8_10, C7_10}, //B10 {0, C9_11, C8_11, C7_11}, //B11 {0, C9_12, C8_12, C7_12}, //B12 {0, C9_13, C8_13, C7_13}, //B13 {0, C9_14, C8_14, C7_14}, //B14 {1, C1_1, C3_2, C4_2}, //C1 {1, C1_2, C2_2, C4_3}, //C2 {1, C1_3, C2_3, C3_3}, //C3 {1, C1_4, C2_4, C3_4}, //C4 {1, C1_5, C2_5, C3_5}, //C5 {1, C1_6, C2_6, C3_6}, //C6 {1, C1_7, C2_7, C3_7}, //C7 {1, C1_8, C2_8, C3_8}, //C8 {1, C9_1, C8_1, C7_1}, //C9 {1, C9_2, C8_2, C7_2}, //C10 {1, C9_3, C8_3, C7_3}, //C11 {1, C9_4, C8_4, C7_4}, //C12 {1, C9_5, C8_5, C7_5}, //C13 {1, C9_6, C8_6, C7_6}, //C14 {1, C9_7, C8_7, C6_6}, //C15 {1, C9_8, C7_7, C6_7}, //C16 {1, C1_9, C3_10, C4_10}, //D1 //D2 {1, C1_11, C2_11, C3_11}, //D3 {1, C1_12, C2_12, C3_12}, //D4 {1, C1_13, C2_13, C3_13}, //D5 {1, C1_14, C2_14, C3_14}, //D6 {1, C1_15, C2_15, C3_15}, //D7 {1, C1_16, C2_16, C3_16}, //D8 {1, C9_9, C8_9, C7_9}, //D9 {1, C9_10, C8_10, C7_10}, //D10 {1, C9_11, C8_11, C7_11}, //D11 {1, C9_12, C8_12, C7_12}, //D12 {1, C9_13, C8_13, C7_13}, //D13 {1, C9_14, C8_14, C7_14}, //D14 {1, C9_15, C8_15, C6_14}, //D15 {1, C9_16, C7_15, C6_15} //D16 }; led_config_t g_led_config = { { { 36, 35, 34, 33, 32, 31, 30, 6, 5, 4, 3, 2, 1, 0 }, { 37, 38, 39, 40, 41, 42, 43, 7, 8, 9, 10, 11, 12, NO_LED }, { 48, 49, 50, 51, 52, 45, 44, 20, 21, 22, 23, 15, 14, 13 }, { 47, NO_LED, 46, 53, 54, 55, 56, 19, 18, 17, 16, 24, NO_LED, 25 }, { 60, 59, 58, 57, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, 29, 28, 27, 26 } }, { //A1-A16 { 224, 0 }, { 204, 0 }, { 187, 0 }, { 170, 0 }, { 153, 0 }, { 136, 0 }, { 119, 0 }, { 119, 16 }, { 136, 16 }, { 153, 16 }, { 170, 16 }, { 187, 16 }, { 204, 16 }, { 224, 32 }, { 224, 16 }, { 197, 32 }, //B1-B14 { 170, 48 }, { 153, 48 }, { 136, 48 }, { 119, 48 }, { 119, 32 }, { 136, 32 }, { 153, 32 }, { 170, 32 }, { 187, 48 }, { 214, 48 }, { 224, 64 }, { 204, 64 }, { 187, 64 }, { 170, 64 }, //C1-C16 { 102, 0 }, { 85, 0 }, { 68, 0 }, { 51, 0 }, { 34, 0 }, { 17, 0 }, { 0, 0 }, { 0, 16 }, { 17, 16 }, { 34, 16 }, { 51, 16 }, { 68, 16 }, { 85, 16 }, { 102, 16 }, { 102, 32 }, { 85, 32 }, //D1-D16 { 32, 48 }, { 10, 48 }, { 0, 32 }, { 17, 32 }, { 34, 32 }, { 51, 32 }, { 68, 32 }, { 51, 48 }, { 68, 48 }, { 85, 48 }, { 102, 48 }, { 102, 64 }, { 34, 68 }, { 17, 68 }, { 0, 68 } }, { //A1-A16 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, //B1-B14 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, 1, //C1-C16 4, 4, 4, 4, 4, 4, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, //D1-D16 4, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1 } }; #else const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location * | | G location * | | | B location * | | | | */ {0, C1_1, C3_2, C4_2}, //A1 {0, C1_2, C2_2, C4_3}, //A2 {0, C1_3, C2_3, C3_3}, //A3 {0, C1_4, C2_4, C3_4}, //A4 {0, C1_5, C2_5, C3_5}, //A5 {0, C1_6, C2_6, C3_6}, //A6 {0, C1_7, C2_7, C3_7}, //A7 {0, C1_8, C2_8, C3_8}, //A8 {0, C9_1, C8_1, C7_1}, //A9 {0, C9_2, C8_2, C7_2}, //A10 {0, C9_3, C8_3, C7_3}, //A11 {0, C9_4, C8_4, C7_4}, //A12 {0, C9_5, C8_5, C7_5}, //A13 {0, C9_6, C8_6, C7_6}, //A14 {0, C9_7, C8_7, C6_6}, //A15 {0, C9_8, C7_7, C6_7}, //A16 {0, C1_9, C3_10, C4_10}, //B1 {0, C1_10, C2_10, C4_11}, //B2 {0, C1_11, C2_11, C3_11}, //B3 {0, C1_12, C2_12, C3_12}, //B4 {0, C1_13, C2_13, C3_13}, //B5 {0, C1_14, C2_14, C3_14}, //B6 {0, C1_15, C2_15, C3_15}, //B7 {0, C1_16, C2_16, C3_16}, //B8 {0, C9_9, C8_9, C7_9}, //B9 {0, C9_10, C8_10, C7_10}, //B10 {0, C9_11, C8_11, C7_11}, //B11 {0, C9_12, C8_12, C7_12}, //B12 {0, C9_13, C8_13, C7_13}, //B13 {0, C9_14, C8_14, C7_14}, //B14 {1, C1_1, C3_2, C4_2}, //C1 {1, C1_2, C2_2, C4_3}, //C2 {1, C1_3, C2_3, C3_3}, //C3 {1, C1_4, C2_4, C3_4}, //C4 {1, C1_5, C2_5, C3_5}, //C5 {1, C1_6, C2_6, C3_6}, //C6 {1, C1_7, C2_7, C3_7}, //C7 {1, C1_8, C2_8, C3_8}, //C8 {1, C9_1, C8_1, C7_1}, //C9 {1, C9_2, C8_2, C7_2}, //C10 {1, C9_3, C8_3, C7_3}, //C11 {1, C9_4, C8_4, C7_4}, //C12 {1, C9_5, C8_5, C7_5}, //C13 {1, C9_6, C8_6, C7_6}, //C14 {1, C9_7, C8_7, C6_6}, //C15 {1, C9_8, C7_7, C6_7}, //C16 {1, C1_9, C3_10, C4_10}, //D1 {1, C1_10, C2_10, C4_11}, //D2 {1, C1_11, C2_11, C3_11}, //D3 {1, C1_12, C2_12, C3_12}, //D4 {1, C1_13, C2_13, C3_13}, //D5 {1, C1_14, C2_14, C3_14}, //D6 {1, C1_15, C2_15, C3_15}, //D7 {1, C1_16, C2_16, C3_16}, //D8 {1, C9_9, C8_9, C7_9}, //D9 {1, C9_10, C8_10, C7_10}, //D10 {1, C9_11, C8_11, C7_11}, //D11 {1, C9_12, C8_12, C7_12}, //D12 {1, C9_13, C8_13, C7_13}, //D13 {1, C9_14, C8_14, C7_14}, //D14 {1, C9_15, C8_15, C6_14}, //D15 {1, C9_16, C7_15, C6_15} //D16 }; led_config_t g_led_config = { { { 36, 35, 34, 33, 32, 31, 30, 6, 5, 4, 3, 2, 1, 0 }, { 37, 38, 39, 40, 41, 42, 43, 7, 8, 9, 10, 11, 12, NO_LED }, { 49, 50, 51, 52, 53, 45, 44, 20, 21, 22, 23, 15, 14, 13 }, { 48, 47, 46, 54, 55, 56, 57, 19, 18, 17, 16, 24, NO_LED, 25 }, { 61, 60, 59, 58, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, 29, 28, 27, 26 } }, { //A1-A16 { 224, 0 }, { 204, 0 }, { 187, 0 }, { 170, 0 }, { 153, 0 }, { 136, 0 }, { 119, 0 }, { 119, 16 }, { 136, 16 }, { 153, 16 }, { 170, 16 }, { 187, 16 }, { 204, 16 }, { 224, 8 }, { 204, 32 }, { 187, 32 }, //B1-B14 { 170, 48 }, { 153, 48 }, { 136, 48 }, { 119, 48 }, { 119, 32 }, { 136, 32 }, { 153, 32 }, { 170, 32 }, { 187, 48 }, { 214, 48 }, { 224, 64 }, { 204, 64 }, { 187, 64 }, { 170, 64 }, //C1-C16 { 102, 0 }, { 85, 0 }, { 68, 0 }, { 51, 0 }, { 34, 0 }, { 17, 0 }, { 0, 0 }, { 0, 16 }, { 17, 16 }, { 34, 16 }, { 51, 16 }, { 68, 16 }, { 85, 16 }, { 102, 16 }, { 102, 32 }, { 85, 32 }, //D1-D16 { 32, 48 }, { 17, 48 }, { 0, 48 }, { 0, 32 }, { 17, 32 }, { 34, 32 }, { 51, 32 }, { 68, 32 }, { 51, 48 }, { 68, 48 }, { 85, 48 }, { 102, 48 }, { 102, 64 }, { 34, 68 }, { 17, 68 }, { 0, 68 } }, { //A1-A16 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, //B1-B14 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, 1, //C1-C16 4, 4, 4, 4, 4, 4, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, //D1-D16 4, 4, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1 } }; #endif void bootmagic_lite(void) { // The lite version of TMK's bootmagic made by Wilba. // 100% less potential for accidentally making the // keyboard do stupid things. // We need multiple scans because debouncing can't be turned off. matrix_scan(); wait_ms(DEBOUNCE); matrix_scan(); // If the Esc and space bar are held down on power up, // reset the EEPROM valid state and jump to bootloader. // Assumes Esc is at [0,0] and spacebar is at [4,6]. // This isn't very generalized, but we need something that doesn't // rely on user's keymaps in firmware or EEPROM. if ( ( matrix_get_row(0) & (1<<0) ) && ( matrix_get_row(4) & (1<<6) ) ) { // Set the TMK/QMK EEPROM state as invalid. eeconfig_disable(); //eeprom_set_valid(false); // Jump to bootloader. bootloader_jump(); } } void matrix_init_kb(void) { // put your keyboard start-up code here // runs once when the firmware starts up bootmagic_lite(); // Please ignore this is for upcoming features // If the EEPROM has the magic, the data is good. // OK to load from EEPROM. /*if (eeprom_is_valid()) { backlight_config_load(); // TODO: do something to "turn on" keymaps in EEPROM? } else { // If the EEPROM has not been saved before, or is out of date, // save the default values to the EEPROM. Default values // come from construction of the zeal_backlight_config instance. backlight_config_save(); // Clear the LED colors stored in EEPROM for ( int row=0; row < MATRIX_ROWS; row++ ) { HSV hsv; for ( int column=0; column < MATRIX_COLS; column++ ) { hsv.h = rand() & 0xFF; hsv.s = rand() & 0x7F; hsv.v = 255; backlight_set_key_color( row, column, hsv ); } } #ifdef USE_KEYMAPS_IN_EEPROM keymap_default_save(); #endif // Save the magic number last, in case saving was interrupted eeprom_set_valid(true); }*/ matrix_init_user(); } void suspend_power_down_kb(void) { rgb_matrix_set_suspend_state(true); } void suspend_wakeup_init_kb(void) { rgb_matrix_set_suspend_state(false); }