/* Copyright 2012 Jun Wako <wakojun@gmail.com> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef CONFIG_H #define CONFIG_H #include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6060 #define DEVICE_VER 0x0001 #define MANUFACTURER geekhack #define PRODUCT GH60 #define DESCRIPTION t.m.k. keyboard firmware for GH60 /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 14 /* * Keyboard Matrix Assignments * * Change this to how you wired your keyboard * COLS: AVR pins used for columns, left to right * ROWS: AVR pins used for rows, top to bottom * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } // Rev A // #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 } // Rev B/C #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } #define UNUSED_PINS /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCING_DELAY 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST /* number of backlight levels */ #define BACKLIGHT_LEVELS 3 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* * Force NKRO * * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the * makefile for this to work.) * * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) * until the next keyboard reset. * * NKRO may prevent your keystrokes from being detected in the BIOS, but it is * fully operational during normal computer usage. * * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by * bootmagic, NKRO mode will always be enabled until it is toggled again during a * power-up. * */ //#define FORCE_NKRO /* * Magic Key Options * * Magic keys are hotkey commands that allow control over firmware functions of * the keyboard. They are best used in combination with the HID Listen program, * found here: https://www.pjrc.com/teensy/hid_listen.html * * The options below allow the magic key functionality to be changed. This is * useful if your keyboard/keypad is missing keys and you want magic key support. * */ /* key combination for magic key command */ #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) /* control how magic key switches layers */ //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false /* override magic key keymap */ //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM //#define MAGIC_KEY_HELP1 H //#define MAGIC_KEY_HELP2 SLASH //#define MAGIC_KEY_DEBUG D //#define MAGIC_KEY_DEBUG_MATRIX X //#define MAGIC_KEY_DEBUG_KBD K //#define MAGIC_KEY_DEBUG_MOUSE M //#define MAGIC_KEY_VERSION V //#define MAGIC_KEY_STATUS S //#define MAGIC_KEY_CONSOLE C //#define MAGIC_KEY_LAYER0_ALT1 ESC //#define MAGIC_KEY_LAYER0_ALT2 GRAVE //#define MAGIC_KEY_LAYER0 0 //#define MAGIC_KEY_LAYER1 1 //#define MAGIC_KEY_LAYER2 2 //#define MAGIC_KEY_LAYER3 3 //#define MAGIC_KEY_LAYER4 4 //#define MAGIC_KEY_LAYER5 5 //#define MAGIC_KEY_LAYER6 6 //#define MAGIC_KEY_LAYER7 7 //#define MAGIC_KEY_LAYER8 8 //#define MAGIC_KEY_LAYER9 9 //#define MAGIC_KEY_BOOTLOADER PAUSE //#define MAGIC_KEY_LOCK CAPS //#define MAGIC_KEY_EEPROM E //#define MAGIC_KEY_NKRO N //#define MAGIC_KEY_SLEEP_LED Z /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION #endif