/* Copyright 2017 Balz Guenat This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef CONFIG_H #define CONFIG_H #include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x660C #define DEVICE_VER 0x0100 #define MANUFACTURER QMK #define PRODUCT Leopold FC660C with QMK #define DESCRIPTION Leopold FC660C with Hasu alternative controller using QMK /* key matrix size */ #define MATRIX_ROWS 8 #define MATRIX_COLS 16 #define DIODE_DIRECTION CUSTOM_MATRIX /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST /* number of backlight levels */ // #define BACKLIGHT_LEVELS 1 /* mapping backlight LEDs to correct Pin */ // #define BACKLIGHT_PIN B7 /* Set 0 if debouncing isn't needed */ #define DEBOUNCING_DELAY 0 #define TAPPING_TERM 175 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ // #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ // #define LOCKING_RESYNC_ENABLE /* key combination for command */ #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) /* * Feature disable options * These options are also useful to firmware size reduction. */ #define USE_I2C /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION // higher value means deeper actuation point, less sensitive // be careful and only make small adjustments (steps of 1 or 2). // too high and keys will fail to actuate. too low and keys will actuate spontaneously. // test all keys before further adjustment. // this should probably stay in the range +/-5. // #define ACTUATION_DEPTH_ADJUSTMENT 0 #endif